Configure Static Routing in Juniper

  Рет қаралды 6,903

Learnet

Learnet

Күн бұрын

Пікірлер: 15
@markychaz
@markychaz 3 жыл бұрын
Best video on youtube explaining this! Thanks
@learnet4123
@learnet4123 3 жыл бұрын
Happy you liked it
@marcostadeuferreiradeolive8631
@marcostadeuferreiradeolive8631 9 ай бұрын
Can i make 3 routes? Next-hop, qualified-next-hop e one more?
@learnet4123
@learnet4123 8 ай бұрын
Hi Marcos, thanks for your comment. You can add as much as routes the router allows you, but you have to consider the preferences of the routes so the router knows which route to choose. Please refer to this Juniper document for further information www.juniper.net/documentation/us/en/software/junos/static-routing/topics/topic-map/static-route-prefer-qualified-next-hop.html
@apurnevgi3954
@apurnevgi3954 2 жыл бұрын
in place of directly connected interface to create default route can we use loopback address of directly connected router as next-hop?
@learnet4123
@learnet4123 2 жыл бұрын
Hi Apur, thanks for your comment, loopback interfaces are virtual interfaces that are not bound to any physical interfaces. Two neighbour routers should have IP addresses in the same range which is not possible for loopback interfaces. I think you can use loopback address as the next hop if you have another route for the neighbour router loopback address. However, it is not a common approach.
@apurnevgi3954
@apurnevgi3954 2 жыл бұрын
@@learnet4123 Thanks alot for for replying. but one thing to notice . if i have two routers directly connected via two ethernet or fibre link and i am running OSPF between Them than from one router lan if i have to go to other router for internet access by default than default static route on loopback is possible in CISCO devices.. but in JUNIPER its not possible... i have tried this on production environment. i know i can use default route originate but in juniper i will prefer next-qualified hop as i am having two links between dem
@learnet4123
@learnet4123 2 жыл бұрын
@@apurnevgi3954 Hi Apur, true when we have dynamic routing in place, things are different. I am truly sorry I did not get what was your network requirements and topology from your explanations. So, I cannot confirm what you were after is possible or impossible.
@mahmoudkotb3124
@mahmoudkotb3124 3 жыл бұрын
Can i buy the full course
@learnet4123
@learnet4123 3 жыл бұрын
Hi Mahmoud, the full course is available here www.udemy.com/course/juniper-jncia-junos-jn0-102-full-pack-p/
@tech_geek7652
@tech_geek7652 3 жыл бұрын
thanks for the video sir
@learnet4123
@learnet4123 3 жыл бұрын
I wish it was useful
@tech_geek7652
@tech_geek7652 3 жыл бұрын
@@learnet4123 yes ofcourse you have saved my life. 😂😂 That's why I have dropped a comment for praising your hard work. 🙏
@tech_geek7652
@tech_geek7652 3 жыл бұрын
Even I am going to recommend my colleague to watch your videos
@learnet4123
@learnet4123 3 жыл бұрын
@@tech_geek7652 Thanks
Configure SNMP on Juniper
8:07
Learnet
Рет қаралды 11 М.
Layer 3 Port Channel Configuration
10:48
Learnet
Рет қаралды 203
When you have a very capricious child 😂😘👍
00:16
Like Asiya
Рет қаралды 18 МЛН
Layer 2 Discovery Protocols
16:28
Learnet
Рет қаралды 96
VLAN and Basic Switch Configuration
18:17
Learnet
Рет қаралды 68
STP Configuration and Troubleshooting Part 1
16:27
Learnet
Рет қаралды 102
Switching Concepts
8:09
Learnet
Рет қаралды 322
L2 Port Channel Configuration
21:07
Learnet
Рет қаралды 58
Trunk Configuration and troubleshooting
19:13
Learnet
Рет қаралды 96
VTP Configuration and Troubleshooting
13:19
Learnet
Рет қаралды 144
STP Concepts Part 2
14:40
Learnet
Рет қаралды 82
STP Configuration and Troubleshooting Part 2
14:15
Learnet
Рет қаралды 72
007 controller config
15:52
sysable IT solutions
Рет қаралды 8