Configure the Router as a DHCP Relay Agent - CCNA

[@Ed-cp5bv]

Oh, man, you saved my day!!! This is the first time I have ever written a comment on KZbin. This time I simply couldn't resist!! I was struggling with getting the DHCP across two networks and nothing I tried helped. Who new that adding an extra address pool would fix the issue?? Now when I look at this, I think how logical this is and I wonder how come I didn't get this on my own.... Plain silly. Thanks again!

[@primeirocampeao688]

And 5 years late I was with the same problem... Look how life it is

[@abdirahmanabdullahi1150]

@@primeirocampeao688 Also im here

[@GauravSingh-tv9bp]

sir your video are way better than my faculty please be blessed and may you live longer than my faculty

[@AlexPerez-ek3xp]

Dancourses is great, amazing job explaining every single concept in detail. I have learned more here than with all the professors I have taken classes with at college. Thank you

[@deadmorose7648]

for real

[@TijsDaMighty]

Very well explained, needed this for school. Thanks!

[@siwini]

@danscourses why if it's a router on a stick with multiple address, do I need ip-helper command on each sub interface? Thanks

[@tubeymoto]

thanx for your comment. I tried that lab of Router on a stick with three subinterfaces under main interface f0/0. You have to give ip helper-address

[@ryanbarrera2595]

Very nice tutorial. Easy and clever. I have question, Can this technique be used in todays network?

[@jamesready1457]

Really clear and useful, thanks!

[@trainspottinggermany8125]

Thanks for this instruction!

[@Inuyasha47]

I was wondering could you do a video explaining how you put the IP address in for the routers because I know how to setup DHCP in a router but since in the video you do not show how you put in the IP in the router I am lost.

[@cinytube9125]

you are great teacher

[@ayushthakur7165]

keep posting more useful stuffs like this.thanx once again !!!

[@Therealguymins]

Just got here from a guy that the closed captions couldn't understand. Thanks a lot!

[@mh7101]

Thank you Dan, very good scenario . Thanks again

[@student_of_life9656]

Good video. Thanks.

[@EdwardDrachenbergJr]

have a lab where you use router on a stick on a couple different routers. vlan10,20,30 on one and 40,50,60 and DHCP server on other and this helped. Only difference is you need to place the helper on each subinterface and not the main one which makes sense. example: interface GigabitEthernet0/1.10 encapsulation dot1Q 10 ip address 10.10.6.1 255.255.255.0 ip helper-address 10.10.10.2 ! interface GigabitEthernet0/1.20 encapsulation dot1Q 20 ip address 10.10.8.1 255.255.255.128 ip helper-address 10.10.10.2 ! interface GigabitEthernet0/1.30 encapsulation dot1Q 30 ip address 10.10.8.129 255.255.255.192 ip helper-address 10.10.10.2

[@32wapo]

easy and powerful. Great job man!!

[@ayushthakur7165]

Really very helpful.thanx a lot sir !!!

[@jefeman85]

danscourses do the same rules apply when configuring a router as DHCP router with DHCPv4? What's different if anything?

[@0nederfoo1]

W00T, you're a genius Dan my boy!

[@hakeem4793]

How does the server know which pool to use when assigning addresses?

[@gngogh]

I've done like in the video and i was not able to get the network 192.168.1.0 working, because i think there's no routing protocol... after i configure RIP the dhcp relay router was able to get the address's for hosts on the .1 network.

[@N0RF0X]

Who would have thought that your comment will save someone's ass 4 years after you wrote it. Thank you man!

[@lovalim21]

which simulator have u used, thank u

[@Techtips200]

I like it video's as they clear difficult topics in easy language and supported be easy lab exampl

[@aliabdullah2098]

Thank u very much, great instructor!

[@mico6042]

Why does the server gave the pc on the 1.0 network a new ip add? Advance thanks.

[@sofyanmaulana8252]

This is the video that i look for 😢 Thanks 😅

[@normalguyize]

do the switches need to be reconfigured also? Or can the host connect to the DHCP server either way?

[@Haidarsattar]

why switches are involved they are L2 devices

[@tiyans]

hello. what if below i want to have another subnet? like 192.168.3.0 network but i dont want to add additional interface on the router is there another way :)?

[@shabeermullan]

great tutorial.... thank you

[@Micro776]

you maded it easy ... oh thanks

[@roshinolauenjen1189]

Thanks for your help!

[@njaneardude]

Dan rocks!

[@kamranullah3454]

thank you sir

[@stvnkelemen]

it is Cisco Packet Tracer

[@neumei626]

Man youtube LOVES slapping ads on your videos.

[@rishabkumar2555]

helpful video...esaily understood...

[@thyatiran]

Thanks!

[@kelusmind8804]

yt is learneaning to me this thinghs...better than school

[@petervu9773]

Hi, can someone help me out ? I did the exact same thing, however network 2 assigns an IP and subnet mask, but it does not assign a default Gateway, i just get 0.0.0.0 ? i can statically assign it and ping across but no dhcp .. pls help ? ** Resolved My pool scheme was wrong.. fixed fixed !!! =]

[@kaddadennoun5150]

Welp the configuration for the dhcp is fine until the relay commands which doesn't do anything, the pc still can't pick up any dhcp adress after the router...

[@mikeybinsd]

Cant get this to work if my life depended on it. Tried bypassing the switch and no go. put ip helper on both sides of the router. no go.. Such a simple topology. It must be PT

[@TeamTidal]

it's a shame that I'm enrolled in CISCO 2 and all the material in there is so vague on getting this to work that I have to watch a video to learn this.

[@_juinzzcr3447]

hey how about 2 router ??? please

[@mathiasluhende9997]

I love it Thanks.

[@unknownwolf4046]

My Lte Modem has DHCP Relays

[@raphaelstolz7402]

awesome! thanks a lot

[@waseem3761]

thank you

[@sicksonezer0]

thank you!

[@NINedStark]

Thanks, but, if i want 7 vlan, the router only have 2 fucking ports, i need to creat sub interfaces?

[@debashisnandy5994]

thanks

[@masonhokmabadi1492]

cheers mate

[@AliAlHabsiAA]

Thanks Dan :-D

[@tahersadeghi6773]

Audio problem. Very low sound.

[@viniciuslc]

great demo +1sub

[@pannagasudarshan6639]

neat

[@simralqasimov3976]

bizde alinmir

[@dmay160]

I have my sound all the way up and cannot hear you

[@jayfloramusic]

Thanks