Configuring RIP (Routing Information Protocol) Packet Tracer | BScIT MCA Practical

[@vincetita9943]

Hi Navin. I used your videos in my Web development course in the Uni and some 10years later, I have diverted to Networking and here again... Great Teacher!!!

[@PawanKumar-jk1yy]

This video is damn 8 years old but still his explanation is awesome. Thank you for your guidance

[@MusicBoy_Nani]

now 10 yrs old damn !!!!!

[@aprilksapp]

You have literally saved my grade. Your explanation of how this works was extremely helpful. Thank you so much!

[@acrowsnest_t6630]

Now imagine instead going to those websites that start off with complex matter that actually dosent solve your problem but explains 3 pages long unimportant shit

[@IceTraxz]

Im studying to be a network technician and this helped me a lot. Thanks!

[@michazywer6816]

This is my first time using the "indian guy from yt" type video, and I must say the memes didn't lie :)

[@sameerchhetri416]

The only channel where I found proper configuration step by step 😍😍😍😍😍

[@farhanjmiahmed]

Let me know if you need more labs

[@techyygamer8762]

Thank you so much sir... I'd really appreciate your help... I thought it would be complicated But its so easy and also i thought that this RIP PROTOCOL would give us the necessary information about our neighbouring router or devices But I think it used to transfer the packet/traffic from one network to another network in a LAN...

[@joyjit27]

lots of LOVE Navin.. Tried so many vidoes and it was getting confusing..Finally found yours..You gave me peace of mind and i understood the most simple routing protocal at easy..

[@armandmalci495]

DUDE. YOU ARE HUGE.... I spent two days searching for a nice video.... thank you... you are simple and good

[@TheSuperpigmen]

WOW WHAT A VIDEO, it really helped me a lot!!!! You saved my scolarship!!

[@NavinReddyJava]

Glad it helped !! Do check our new channel goo.gl/8iPYZj for more videos

[@AkashRaj-wd6wm]

Started watching casually and suddenly realized that I know this voice so scrolled down only to be amazed to know thats you navin sir.

[@ismailsalim7228]

Thanks mr I was suffer for some errors but through your tutorial I fix it thanks a lot 🤝👊🏿🙏

[@maneljulio]

Excellent. In under 9 minutes I understood what I spent days trying to understand on a book.

[@rizwanullahmuhammad7301]

bro, very easy, very clear, very authentic, too much time saving, best best best, bro excellent work, please keep uploading

[@MohamedAli-zy4cf]

This is what I was looking for in the past, the lesson is really impressive and useful.. Thanks for your help.

[@NavinReddyJava]

Glad it helped !! Do check our new channel goo.gl/8iPYZj for more videos

[@kaustubhanavkar8513]

Thank you sir. Your videos are so helpful I didn't understand in college but after watch your video I got 46 marks out of 50 in final practical. 🙏🙏👌

[@rodrigopolet]

Navin, saving more lives than penincillin. Infinite hanks

[@SajidAli-je9tz]

I was wondering since week how to do it but wasn't able to find appropriate videos you made my weekend superb. Now i can submit my 1st semester project. Thank you

[@NavinReddyJava]

Subscribe my new Channel : goo.gl/mBRMGn

[@akinorinoguera9886]

Now I know what's wrong when I'm doing this before. Thanks I got it now. Excellent

[@programmingtech67]

THANKS YOU CLARIFIED IN ADVANCE WAY

[@patrollix3149]

Great video! Really helped me understand the simple network things that appear really complex

[@adilsattar1838]

Thanks brother you are too good person in the world....... Thanks again well done .. God bless you....

[@NavinReddyJava]

Hi, Thank you :) Visit my new channel : kzbin.info

[@mdzyrd407]

ty our prof doesn't teach us. u saved us ty

[@estebangonzalez6782]

Nice turorial, helped me a lot

[@ayeshakhanzada4005]

thank you sir ! it helped me solving error

[@atharvajibhakate3634]

Thankyou!! Most simple and easy way :)

[@hafisdilzath2938]

🎉🎉❤ thanks for the video

[@felixlps1]

Thank you I have a test tomorrow and this helped a lot

[@fahadmoha4104]

you are good teacher keep going

[@fahadmoha4104]

this video help me when router interning getaway

[@abhishekkaushik2437]

That was really a good and simplest way to teach this configuration 🔥

[@Nohiro]

FINALLY, THANK YOU SIR!

[@deepanjalisingh3310]

Thank you very much for uploading this video very helpful 💓💓

[@dibyambaral4581]

Navin Reddy Sir, i am really surprise to know that you were also teaching us cisco related. I was your student on Java....

[@shaileshpandey1933]

thnks sir ji ..awsm video it was..very nicely you explained here..thnkew so much

[@rdias002]

Lovely 😍. Please come teach in my college.

[@NavinReddyJava]

Hi, Thank you :) Visit my new channel : kzbin.info

[@MyTiger09]

Thank you Mr Reddy.....Well explained.!!

[@shoaibyounas331]

Really helpful video.Loved It

[@sujitmoteVlog]

yahh its very helpful n saving the time , thanku navin sir

[@andreysinchilo3389]

Very nice video it helps me thumbs up!

[@edmondrexhepi3194]

slowly man take it easy dont rush

[@iglesiacristianarestauraci8655]

Very Helpful. Thanks a lot!

[@saadmanahmed860]

very good illustration

[@himalaysolanki]

Sir Please upload 1.config of PPP 2.conf EIGRP 3.conf ospf 4.acess list conf,conf of NAT

[@shubhampardeshi6909]

Yes sir... please

[@franciscomuabi]

Thank so much! You helped me a bunch!

[@NavinReddyJava]

Subscribe my new Channel : goo.gl/mBRMGn

[@education4u154]

Awesome as usual

[@harshikeshbhadaniya3411]

Awesome,thanks for teaching.

[@khalidadjimaoui7340]

thanks , you saved my day

[@aaishakanwalkhanlabenginee9918]

wow great explanation sir.thank u

[@aqibfayyaz1619]

Thanks sir good explanation.

[@alifirsyad6240]

thank you mr ,it really helped

[@depth1080]

its really amazing good job!

[@deepanjalisingh3310]

This is vidio really helped me a lot

[@darshangavkar3960]

Sir tysm for ur videos they r easy to unstd n even perform!!!May u will get some videos on IT field....❤️

[@Reallifecleanliving]

Thank you for helping me!

[@eduardorpg64]

This helped a lot! Thanks!

[@sayantanofficial5193]

thank you sir,... very nicely explained

[@NavinReddyJava]

Hi, Thank you :) Visit my new channel : kzbin.info

[@Sid---hi7rj]

Excellent Tutorial

[@sumayaislam7020]

Thank you sooooo much. This video is really helpful

[@Blinks77]

Ah, thankyou. That was greatly helpful.

[@miraikuriyama7593]

You should be mine teacher haiyaa

[@adityamanikanta294]

I want to configure 4 routers in the 10.1.X.X network. Eg: I want to configure 10.1.14.1 and 10.1.12.1, but after one configuration, it is showing that 10.1.12.1 255.0.0.0 overlaps the FastEthernet0/0. Is there any possibility to configure?

[@minaanton2076]

Thanks its very helpful , can u use please the same thing with OSPF and EIGRP protocols ? please

[@sachinpathak2254]

Very helpful video thank you so much

[@saileepawar1202]

thankyu sir it really helped!!

[@Shrapnel-qy4xi]

is the process the same for networks that are on different subnets?

[@TheSleyths]

Hey guys can you help me understand something? Does RIP send the router's ENTIRE routing table (as textbooks say) or ONLY the networks it's configured to advertise? I mean, I read everywhere that RIP shares the entire routing table of that router but we can see that if we not configure one network to be advertised (through the "network" command), that route never gets shared with the neigboor RIP routers. So... what am I missing?

[@gaurangisandeepkumargarg6896]

Omg you wrote this comment 7 years ago! I wonder how you are doing in life right now :)

[@joysellemalunes4270]

thank you because of this video now i know how to connect and i tried it, and it successful, thank you so much, can i have a question? you are now connect router to router then router to switch can another router connect to switch?

[@MukeshGupta-gb3nc]

sir, in the above vedio when i am passing pdu form pc0 to switch 0 iam getting error like in dialog box that switch 0 i.e. suppose 172.16.0.0 has no functional port coming and switch0 to router0 pdu failed so suggest what to do?and other combinatio of pdu is succesful

[@draatman]

the best video help me thanks

[@shubhammatale8964]

when i start simulation transferring packet from pc0 to pc1 is succesful but from pc1 to pc0 get wrong. pink packet appears with cross sign. What is problem? or what is solution

[@Tamil_learning_for_kids]

sir, can we create a simple protocol using java code

[@suxton6881]

Thank You for the Information

[@Globalflavorsinyourkitchen]

Thnks sirji ❤

[@student4life366]

that was great - thank you!!

[@Craig-Be]

10/10 thank you so much

[@PallaviGangurde-gu4my]

It's awesome. ..

[@nasimasiddiqui8695]

How to confogure serial 2/0 i also configured the same way as urs but in mine clock rate is not showing

[@MuhammadArshad-vt4jk]

after giving ip address you can type this command. clock rate 64000

[@Yasar4ever]

Keep it up more video for the CCNA. Thank you

[@bohdan_sv]

I had a lot of problems because I didn't specify the gateway. Thanks

[@amanmudholkar4804]

How did you checked the time for the routers on the cable??

[@poiupoiu4791]

Sir save kiya huva practical ka cli me commands fir se visible karne ke liye kya Krna hoga sir reply fast .🤕exam he kl

[@miosztokarski5057]

thanks Navin

[@Shanlej]

beef?

[@surajmoger-iw4dn]

Can you upload video about routing rip version 1 and version 2

[@Ic3m4te]

thank u so much sir u helped me so much!!!

[@aurelbajrami4088]

good job man..thanks for the help :)

[@NavinReddyJava]

Glad it helped !! Do check our new channel goo.gl/8iPYZj for more videos

[@aarushibhola6776]

very well explained

[@salioutall1092]

Very clear

[@srujanan]

great video sir

[@NavinReddyJava]

Thank you :) Check out my new Channel : kzbin.info

[@Effulgent]

Большое спасибо, выручил

[@drrenymroyroy3544]

thanku so much sirji i love youuuuuu

[@chinkyvijur8844]

sir how to use gui to configure rip in gns3 as u used here?

[@manishasutar598]

Hi sir, this configuration works on existing ip address and router. So how I come to know about existing ip address

[@laxmibabysharma2722]

Sir if we have three or more router(network) then how could i connect it to each other

[@networkingworldtutorials147]

You can apply the exact same configuration. Here are some examples of configuring multiple routers for EIGRP and OSPF Routing Protocols: OSPF: kzbin.info/www/bejne/pZKWYomhlJKdZ5Y EIGRP: kzbin.info/www/bejne/iqrLfYympNuopLs

[@alejandrocruz5723]

SImple but really really good

[@zeeshanulhaq4619]

when i am trying to send a packet from pc1 to pc0 its not working .. it would be very grateful if someone help me.

[@AmanExplora]

sir pls help me in solving this problem What is need of Router in Internet? Explain Static and Dynamic routing. Configure two routers with two host each and protocol PPP and RIP on different router with complete diagram and steps of Router Configuration.

[@pranu1412]

Hey Navin....Very Nicely Explained......jst wanna know...weather configuration mode is better or cli mode??plz reply thx

[@networkingworldtutorials147]

To me i think there is no a better way. It is just a matter of preferences. However, in real life scenarios there wont be CUI (Config mode) . You will have to configure it through CLI.

[@Mind_Mirror]

Sir how udp tcp are configured in any mobile by companies.

[@devenvasekar6002]

why generic router is use? and what about other...?

[@spiralings]

thanks. is it any different if I want to use RIPv2?

[@NavinReddyJava]

+spiralings Yes RIPv2 is different...