Connect CCTV camera to DVR using video baluns and UTP cable

[@PoseidwnTech]

New video for CCTV Cameras using Video Baluns : kzbin.info/www/bejne/fafLqJ-laLZ8mJI

[@MudassirKhan-e1b]

Děda❤ee3wr2vv.

[@Hussnainvlogs033]

😂s2q

[@Megabrainsr]

Thank you so much, this is the only video that shows it correctly.

[@PoseidwnTech]

Thank you for your feedback! I also made this video: kzbin.info/www/bejne/fafLqJ-laLZ8mJI featuring a different type of video baluns. It would be awesome if you could take the time to watch it and send me your feedback!

[@ff7516]

Hi, your video is very useful, thanks... I have a question: How far could the utp cable power 2 cameras without voltage loss ?

[@PoseidwnTech]

In some of our installations we used up to 80 meters cable without any problem, but for longer distances we give power to the cameras locally. For example we installed cameras in a house and the customer wanted to add also 2 cameras in a storage room. The distance between the storage room and the DVR (house) were more than 100 meters. So we used 1 utp cable for the video signal but we installed a DC Power Supply (with battery backup) inside the storage room in order to give power to the 2 cameras.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@glaura1581]

maybe elecbee connectors as well as other connectors. i think it's really helpful for me and i will recommend this video to my friends.thanks!

[@PoseidwnTech]

Thank you for your comment!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@SuperChaChaGuy]

I often wondered how UTP long runs don't lose voltage since the wire guage on utp is so thin. The doubling up of a PAIR to each pole of the power feel is a great idea i think. Minimizes the line loss due to thin wire.

[@PoseidwnTech]

That's right! Thank you for your comment!

[@haydnthomasfilmscorporate1553]

Is there a specific reason why you only double up power and not video?

[@littleturtlepizza]

@@haydnthomasfilmscorporate1553 because the voltage on video line is lower but yes, you can double the video if you consider it as long as you still have another pair of wires unconnected

[@taterbell9507]

Because the camera's do not pull a big load (amperage). Electrical load is the cause of voltage drop. A wire can be run for miles and if nothing is connected to it you'll have the same voltage at both ends. If you start connecting items to it at the end of the wire you will eventually see voltage drop.

[@conktr]

@@PoseidwnTech επίσης το utp μόνο κόβεται και σου σπάει τα νεύρα.

[@pierpa_76pierpaolo]

I need something like this to record but I have 5.8 ghz wireless cameras. It is NOT as professional as this but for the time being it is fine.

[@vangieskitchenomicvlog4827]

thank you for sharing ypur idea how to connect cctv to dvr

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@valuechain4710]

I love your tools , lol Where did you buy those cable clipper tools and video was clearly explained

[@PoseidwnTech]

😁

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@danielrivas6356]

Excelent video, thanks... So simple to understand...

[@PoseidwnTech]

Glad it was helpful!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@natedogg8051]

Please suggest to use seperate power cable when using CAT 5/6 UTP cable. Since these cameras are analog it will cause interference.

[@PoseidwnTech]

You are right! Thank you for your feedback!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@ミゲルアヤラ]

Hello, do you have a video on how to set up the tv screen for the cameras?

[@celsojoven3525]

Pwd

[@ミゲルアヤラ]

@@celsojoven3525 We all are pwd or are you an expert using Autocad because I am

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@adityamedicare8583]

Good teachings great IDEAS are MADE Good experienced knowledge. Keep it updated 🙂

[@PoseidwnTech]

Thank you for your comment!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@alexbala8936]

Normally i use following: Video balun green for + whithe green for - and for supply brown and blue for + and white brown and white brown for - . The orange and orange white i don't use it. Every single cable for one camera and i puted 4 in every corner. I think that's the way for good connection and no interferences

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@MuhammadKhalid-t5z]

Hi Respactabile Sir How much cable use this baluns please give me a answer Thanks a lot,s Respactabile Sir very nice Guide.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@md.shahinulislam7982]

Nice video, but I have a question what is the defarence Between 2+2 video bellon line and 1+1 line. Thanks

[@7918476]

Great video i have a question. Does it make a difference if i use a 2mp balun on a 5mp camera? And why?

[@xXFOYXxQ8]

The guy clearly doesn't pay attention to answer the comments, but I don't mind to give a definitive answer to your question. It depends on the voltage. If your camera (check the label sticker on the camera unit/box) takes 12 volts and only needs (required) 1 amps or maybe 1.5 amps, don't worry if you put a power supply with 12 volts and 3 amps or 5. The voltage where you have to be picky and careful. I use 2.5 amps just in case the power supply gets weak over time due to our extremely hot weather (Middle-East). I hope I answered your old unanswered question throughly!

[@PoseidwnTech]

I apologise! It requires a lot of time and effort to create videos and sometimes it is very difficult to answer every comment! Thank you for taking the time to answer!

[@fruitieplayys9125]

you should also use two pairs for the video when using longer distances

[@luciano_romano]

How could I use a V+ and V- pair coming in (ie. as the input), and translate it to a more 'user friendly' output (like HDMI)? Can I use the balun to have the signal run the other way, and then plug the coaxial into a converter? Thanks :)

[@everavila6832]

Thank you so much for this video, very help. Greatly appreciated it.

[@PoseidwnTech]

You're welcome! Thank you for your comment!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@xXFOYXxQ8]

Sir, I have a question, can you pair 2 cameras with 1 Ethernet cable, since there are 4 pairs?

[@MP-oh9lt]

You can but sometimes there can be problems with signal mirroring. I have connected up to 3 cams over one utp cable but this is not advisable.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@orangeduc3129]

How do I power 8 cameras should I buy 12v power adapter for each of the camera as you did meaning & power adapters

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@aminislam4884]

So Clear Working You, Thank You so Much❤❤❤🇧🇩

[@PoseidwnTech]

You are welcome 😊

[@edmanuelfuentes6210]

Hi. IT helped me very much. I have 1 issue why does it blink when i use a longer cabel? Please help

[@PoseidwnTech]

The problem is with the power source. Try to move the DC Power Supply closer to the camera.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@georgestamoulis1389]

Thank you very much for this! One question: If you have one power supply and want to connect two analog cameras, what do you do in the power supply end? Do you put two pairs in each input, so 4 pairs in total?

[@PoseidwnTech]

When i want to connect two analog cameras in 1 UTP cable, i am using the orange pair for the video signal of Camera1, the green pair for the video signal of Camera2 the brown pair for power supply (+) and the blue pair for power supply (-). At the end of brown pair and blue pair i am connecting extension cables in order to add 2 male dc power jacks for the 2 cameras. In order to connect the brown and blue pairs with the extension cables i am using 3M Scotchlok Connectors : kzbin.info/www/bejne/mJnPnoZtoduIeM0

[@Jahhumble1]

Would that create an issue where both cameras are not getting the right amount of voltage?.

[@victorbaddoo6213]

8PM

[@funkblack]

This is very helpful, but one thing I don't understand. If I have 10 cameras, will I need 10 power adaptors to power all the cameras?

[@MrCleitus]

Hello, did you ever get an answer for this, I am wondering the same thing.

[@funkblack]

It depends on the charger amperage. Usually one camera draws 0.5A of power, so you'd be safe with a charger with 0.5A or higher output. If you do have a 3A charger, in theory you could hook up 6 cameras, but I wouldn't do that. I would say only 3 cameras are safer.

[@PoseidwnTech]

I agree with you!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@shamar1971]

Very good work

[@PoseidwnTech]

Thank you!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@HDYTube]

Best video i need this titorial wooow

[@PoseidwnTech]

Thank you! Please check also this one, about video baluns : kzbin.info/www/bejne/fafLqJ-laLZ8mJI

[@MegaBankjob]

Two pairs are always better than one. CCTV with two pairs in the balun gives a certain amount of redundancy in case one pair breaks. This is especially relative and important when installs are carried out in this configuration in cold countries. If installation takes place in very cold conditions, one pair can break very easily as Cat cable becomes extremely 'brittle' in the cold. Also freezing temperatures can lead to a break in the Cat cable inside any enclosure that the connections are housed in outdoors if there is any significant tension on the cable due to a tight fit. In both cases two pairs are far better than one. As using one is just laziness by the installer to be honest!

[@nanocube]

"It is critically important that you DO NOT double up on the pairs going into the baluns. Ehternet cable is UTP cable with specific twists in the cable, having two pairs can cause interference and video loss, especially on longer runs. You must only use one pair, not two." ... from kzbin.info/www/bejne/fKTReGBuitqci5Y

[@franciscocorrales2400]

Exactly, i normally use all pair to connect dc and video to keep better redundancy and never had an issue in resolution or voltage

[@isaganibulanon7434]

Bcxw, and I cb m dz I jiovj

[@gemechuayele]

​

[@orangeduc3129]

Good job please why do I have lines in front of the camera video like interfering after using this balun setup

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@angelusman974]

Great video, pls I have a question , why didn't you use any of the other colour wire, is there a specific reason for using So and O

[@PoseidwnTech]

There is no specific reason. You can use any color you like.

[@emmanuelolajide6961]

@@PoseidwnTech thank you for this

[@PoseidwnTech]

@@emmanuelolajide6961 Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@bassalh2025]

Bad idea bro, for video signal you must use coaxial cable for better video quality especially if you run long cable

[@PoseidwnTech]

I agree, but with a UTP cable can support analog cameras with video baluns and IP cameras.

[@vikumliyanage2277]

Can you tell this step all camera system working?

[@PoseidwnTech]

Yes all cameras are working! And also if your customer wants to change the cameras from analog to IP you will have just to terminate the UTP Cable with RJ45 connector. Also with utp cable you can connect two analog cameras at the same time.

[@SAEED2HK]

This kind of power supply for only one camera not for all

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@joeysandersgoogleplus]

Why you didn't use the green one for the video? Only one wire for positive and one wire for negative?

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@crhistianhorna3115]

Will this work with differents analogs brands camera with different DVR brands?

[@PoseidwnTech]

So far i didn't find any analog cameras or DVR that doesn't support video baluns.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@algigirl]

Thank you for the video. I have cat six and balun. Going to install CCTV ..less than. Hundred metre.

[@PoseidwnTech]

Great 👍

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@Battlefield_Tales]

Useful tutorial. God bless you.

[@PoseidwnTech]

Thank you for your comment!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@JayRTech]

so if we have no available premade bnc cable .then we use this video balon method right?

[@PoseidwnTech]

Yes that's right!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@postelnicuadrian72]

If i have dahua cameras with inbuilt microphone via coaxial to the dvr, microphone will work if i do this type of wiring??

[@PoseidwnTech]

Yes they will work!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@salifumubarikwumpini1286]

Will audio work in this connection

[@carlosfreitas7982]

Boa tarde amigo! Instalei 4 câmeras Intelbras na minha casa. Só que está monitorando só na tv como fazer para monitorar no celular.Obrigado

[@PoseidwnTech]

Hi! What cameras do you have? For example if the cameras are from Dahua the mobile app is DMSS.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@SAEED2HK]

Cat 6 cable not designed for analog camera care-full DC + - and stripes better keep in middle of wire so its will not move down incase if some one pulled hardly

[@PoseidwnTech]

For that reason we are using cable ties in the video balun and the power plug.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@thangadurairaghavelu5454]

Very nice presentation

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@annaparas]

Where I get this video baluns.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@rjnz7744]

terimakasih informasinya, mau tanya apakah ada perbedaan kualitas video menggunakan kabel utp cat5e atau cat6?

[@PoseidwnTech]

For the analog cameras there is no difference, but the idea of using UTP cables in analog cameras is in order to make a future proof installation and to be easy to convert your analog system to ip. So it is better to use Cat6.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@mohsinabbass]

Dear sir, i need to confirm Safevant DVR can work any type of Analog camera .Please explain which type of analog camera can work of this Safevant dvr .

[@PoseidwnTech]

I am sorry but I am not familiar with Safevant DVR.

[@omosebiadedayo5123]

Thanks I really enjoyed this helps refresh my memory

[@PoseidwnTech]

You are welcome!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@davidr5870]

Can you double up on the video balun?

[@sprax112]

You can and I used to, until I started getting lines that were not fixable, I used single for both power and video and it's fixed the lines...

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@valentinbordea]

Can I use this method with any camera? or does it need PoE suport(or something like this)??

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@Roblox.de.Zamboanga]

Ilang meter po supported ung cat5?

[@khubab4712]

Can we use single cat6 to connect to cameras? If yes what will be the color coding. Thanks

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@matias3523]

Hello, how many meters can I make with this method? I need to put 2 cameras... the 1st at 50 meters and the 2nd at 70 meters from the dvr. Can I use the same cable?

[@PoseidwnTech]

Yes you can, but it depends of the video baluns. Please watch this tutorial for more info : kzbin.info/www/bejne/fafLqJ-laLZ8mJI

[@matias3523]

@@PoseidwnTech nice, thank you

[@Nikolabosanacleko1]

Za kameru ide od 12 v sa 2 konektora adapter mora imat 5 ampera sa 2 konektora na resiver i cameru

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@amil7441]

Hi am confused so if I want to connect 8 camers IL have to get 8 separate power supply?

[@PoseidwnTech]

Hi! It's not your fault. That was an example. For more cameras you can use a power supply like this one : amzn.to/2XHX42E

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@danpsalmersanagustin3747]

What is the maximum length of this configuration? dc power and balun connection if the power supply is centralized?

[@PoseidwnTech]

With a Cat6 cable and using 1 pair(2 wires) for + and 1 pair for -, i don't recommend to use for more than 100 meters.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@LouisGFranco]

But what if want to use a ptz camera with a power over Ethernet female connector to use on my DVR with BNC and wire it to to DVR ptz controls?

[@PoseidwnTech]

The UTP cable has 8 wires that are enough for connecting a PTZ Camera.

[@LouisGFranco]

@@PoseidwnTech would you happen to know the color code wiring for which cables on the Ethernet cable are video for the BNC (video), power to the camera, and the + and - that go on the little green adapter to control the ptz functions so that I may connect them to my DVR or do they vary from camera to camera and Ethernet cable to Ethernet cable? If so do you have link to diagrams of which "pins" on the 8 "pin" Ethernet connector are for what function?

[@fralesyt]

Question… you didn't use a pair of the ethernet cable. Do you think I can use a single ethernet cable to connect two cams to the dvr? Of course I have to share the two pairs for the power supply of the two cams and, if the second cam is in a different position from the first, I have to open the ethernet cable and remove the pair of the second cam. What do you think about it?

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@jumaljuma]

Excellent job

[@PoseidwnTech]

Thank you!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@jp31577]

Ve..nice.. ideas..sir thank you..

[@PoseidwnTech]

You are welcome!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@StuddyMrBorrowdale]

Just wanna say thanks ey

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@alphaisaladedoyinope7161]

Does it work seamlessly when the utp cable is up to 300m, if so how do I solve the power problem from 300m away?

[@PoseidwnTech]

300m it is a long distance! I don't remember to have tested in a distance like this. For more than 100meters i try to connect the power supply closer to the camera.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@tuahstudio9107]

How about pricing installation cost between rg59 and cat5e..?

[@PoseidwnTech]

I believe that ump cable is cheaper!

[@tetraederzufrequenz7896]

@@PoseidwnTech how can we protect our devices against Jammers?

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@95WLY]

Thanks man for this !! You the best ! I help me .

[@PoseidwnTech]

You're welcome! Thank you for your comment!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@djftn]

nice way if you want to save some money from the cables.. but what happens to HD cameras with 3 or 5 Megapixels? you may have loss in image quality. for long distances you can use a dvr that gets 2 or 4 extra ip cameras so you don t have to use signal cable at all.. for any other installation i think that nothing is compared with the classic coaxial camera cable.

[@PoseidwnTech]

I haven't noticed any image loss even in higher megapixels cameras. The only problem with long distance it's the DC Power. I agree about the coaxial cables but with the UTP cable it's easy to upgrade your system from analog to IP while with the coaxial you can't.

[@djftn]

@@PoseidwnTech it depends on what type of system you want to build. best thing you mentioned is that at long distances you can use an additional power suply pluged where the camera is located. no power loss at all.. At my location nobody is using ip cameras because at a 24mbps connection the upload speed is 1mbps an the download 13. only a few locations have faster internet than this. the dvr's also downgrade the resolution so the image flows properly. only hikvision dvr's run pretty well

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@jorgeantonio6774]

Friend.. if I connect several IP cameras via ethernet cable, will that make my internet a little slower?... I understand that Wi-Fi cameras do make the Wi-Fi internet slower, but I don't know if I should do it via ethernet also make it slower

[@abualis1178]

If you have a good network you should be ok

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@ibrahimibrahim8667]

Good job 👍

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@jjjoshi4369]

Pl. Direct conection in tv av pot not use dvr only watch live in door camera. Not recording hard disk pl. Sent a vedio .urgent reply please. Thankyou

[@PoseidwnTech]

Can you please explain in more details because i don't understand?

[@jjjoshi4369]

Muza 1 camera door pe lagana he lekin direct tv Me vdo dekhna he only live no recording no dvr only door pe kon he ye dekhma he TV me A V mod karke dekhsakte he?

[@jjjoshi4369]

Instol on door no recording no dvr only live in tv use as audio vedio pinurgent reply

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@evanceodhiambo9380]

It a nice tutorial thanks

[@PoseidwnTech]

You're welcome!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@humayfaragi2827]

Beautiful video

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@eljahvyoncasley2176]

J CONSTITUTION I HAVE 4-ANALOG CAMERA AND 3- IP CAMERA TRYING TO PUT THEM TOGETHER WHAT CABLE , I NEED DO I NEED DVR,OR NVR

[@PoseidwnTech]

You will need a DVR that supports also IP Cameras.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@ambroseene6925]

What is the max distance with these baluns?

[@PoseidwnTech]

These baluns are 4K Passive HDCVI Balun from dahua and according to their site : "Transmission Distance at 4K: 200 m (656 ft)" us.dahuasecurity.com/?product=4k-passive-hdcvi-balun

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@johnolivares3712]

What kind of power supply is that?

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@visarnura2745]

Hello there! I want to know if I can apply this type of connection for my analog camera to connect it to my NVR. So the idea is to have only one end of the UTP cable with video balun and the other end of the cable to have RJ45 to connect to the switch. Would that work????

[@PoseidwnTech]

Not with these baluns! You will need an analog to IP converter but in my opinion does not worth it.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@bilalhassanzahid8947]

If the length of wire is +40 meter.. did adapter loses ampere at end ?

[@PoseidwnTech]

At 40+ meters with Cat6 cable you will not have any problem. But after 80 meters you will have to check.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@frankayala3950]

Does it matter if the utp cable is cat 5,5e or cat 6, 6e in terms of the wiring method ?

[@naifox1]

5e 6 best

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@richardpelaez2059]

What type of utp cable you use sir? Cat5 or cat6 thanks

[@PoseidwnTech]

Most of the times we are using Cat6 cables.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@sureshkumarmedishetti4673]

For less than 50 mtrs distance shall we use cat 5 cable sir

[@PoseidwnTech]

You can but i highly recommend to use Cat6.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@aurelianocilocilo5070]

thank you so and i got it..

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@kidapenjulesbalonggay7455]

Can I use 2 wires only in power supply?

[@PoseidwnTech]

It depends on cable length.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@e-lockscarkeysprogrammingt770]

Αν χρησιμοποιήσω BNC connector με τα βιδακια αντι για Balun δεν θα δουλεψει; τι προσφερει παραπανω το Balun?

[@PoseidwnTech]

Αν μπορείς δες το τελευταίο και πιο αναλυτικό video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@calvincampbell9511]

I need to know how to connect Jensen bulbs Camara

[@PoseidwnTech]

We are not familiar with this brand!

[@nuruzzaman1720]

Thank you so much sir

[@PoseidwnTech]

You are welcome!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@brotherist]

How come you can use this for 2 camera? Do you mean one of camera has no power? You already use 3 out of 4 pair

[@PoseidwnTech]

We use common power for the two cameras. For example : Brown Pair --> DC + and Blue Pair --> DC - for both cameras, Orange Pair --> Video Signal Camera 1 and Green Pair --> Video Signal Camera 2

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@ericmpoki3003]

I want to learn how to delete a footage on nvr

[@kabapkazserem_]

I have a question my camera working but now i have information no video i cut little bit cable but still not working :/ camera have power I see Red light at night but camera not working ;/

[@frankayala3950]

Still having problem?

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@oussama3242]

For how many meter you can use UTP cable in between the balun ? Can you use it for 400 meter?

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@renukaamarasinha6407]

Very good program thanks

[@PoseidwnTech]

You're welcome!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@jay-6835]

Can anyone tell me what the device is called at 5.02 mark? (used for connecting the electric wire)

[@PoseidwnTech]

Do you mean the male dc power jack?

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@JunPVlog]

Thank you for sharing sir new supporters here

[@PoseidwnTech]

Thank you for your support!

[@silvakeveyan7977]

kzbin.info/www/bejne/mIHad55miMt_aZo

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@MalikahHypolite]

can this be done without a connector

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@Scattered.thoughts.]

Must use a high quality cat-6 cable and remember to give power supply externally for better vedio

[@PoseidwnTech]

Thank you for your comment! You are right!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@AdwoaAkwaboaa]

Will any light show on dvr

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@CCTVFUNvlog]

Good video

[@PoseidwnTech]

Thank you!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@monimjalal2245]

Excellent

[@PoseidwnTech]

Thank you!

[@Akeso_ppp]

0:04 u got 2 cables out , i got 4more clewn without protection 😮 what to do??? how to connect all these???

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@johnpaulsismoan]

What tools that you use?

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@ominohouma1048]

In such a connection can both audio and video works?

[@PoseidwnTech]

This depends on the camera and DVR, so yes both video and audio can work!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@DUCATI13241]

thats a well done

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@bbogdanmircea]

Those adapters look really horrible, are you putting them into some boxes or are you leaving them outside the camera, exposed to the elements?

[@PoseidwnTech]

Of course not! We are using junction boxes. Check this video : kzbin.info/www/bejne/gnXHYZehateci68 This is an IP camera but the junction box is the same.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@GreekCypriotSoul]

Φίλε πως να βγάλω έξω από το σπίτι POE καλώδιο; Έχω βρει σούστα ηλεκτρολόγου, έχω και το cctv system και δεν ξέρω πως να περάσω από εσωτερικά του σπιτιού προς τα έξω τα poe καλώδια των καμερών.

[@PoseidwnTech]

Χρειάζεται να περάσεις UTP καλώδιο αλλά θα ήταν καλύτερα να πάρεις τη γνώμη ενός ηλεκτρολόγου.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@jundurantv1430]

Much better you can show the video if your camera is working or not. Thank you!

[@PoseidwnTech]

Thank you for your comment! I will do so in the next video with the new video baluns!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve