Connect Cisco Router & Switch to ISP Home Router and Access Internet

#Cisco #Router_Configuration #IT_Support_People
In this video I've demonstrated step by step process how to connect Cisco 2851 Router and Cisco 3560 Switch to ISP Home router and access internet. I also described connection details and configuration of Cisco router using Putty and console cable.
IT Support People Facebook Page:
/ it_support-peopledeskt...
Configure VLAN Allow VLANs to Access Internet:
• Configure VLAN | Allow...
Configure Cisco Access Point Standalone/Autonomous using GUI with WPAv2 Authentication Key:
• Configure Cisco Access...
Configure Standalone Cisco Access Point from CLI with WPAv2 Authentication:
• Configure Cisco Access...
How to Reset Cisco Access Point to Factory Defaults using Mode Button
• Reset Cisco Access Poi...
Connect Cisco Router using PuTTY & Console Cable | Change Text Color/ Font Size/ Background on PuTTY:
• Connect PuTTY with Cis...
PuTTY command line for Router Configuration:
Where hostname of the Router is "Router"
Entering to Privileged mode: enable
Check IP Interface:#show ip interface brief
Entering to Global Configuration mode:
Router#configure terminal
Entering GE0/0 Interface:
Router(config)#interface gigabitEthernet 0/0
Making Interface up:
Router(config-if)#no shutdown
Assigning IP address from DHCP: # ip address dhcp
Ping to Google DNS server:
Router#ping 8.8.8.8
Entering GE0/1 Interface:
Router(config)#interface gigabitEthernet 0/1
Assigning IP address :
Router(config-if)#ip address 192.168.2.1 255.255.255.0
Making Interface up:
Router(config-if)#no shutdown
Creating DHCP pool:
First go to global configuration mode then
Router(config)#ip dhcp pool mainuser
Router(dhcp-config)#network 192.168.2.0 /24
Router(dhcp-config)#default-router 192.168.2.1
Router(dhcp-config)#dns-server 8.8.8.8
Router(dhcp-config)#exit
Static Routing for default Gateway
Router(config)#ip route 0.0.0.0 0.0.0.0 192.168.1.1
Configuring NAT Outside:
Router(config)#interface gigabitEthernet 0/0
Router(config-if)#ip nat outside
Router(config-if)#exit
Configuring NAT inside:
Router(config)#interface gigabitEthernet 0/1
Router(config-if)#ip nat inside
Router(config-if)#exit
Creating Access list:
Router(config)#ip access-list standard 1
Router(config-std-nacl)#permit any
Router(config-std-nacl)#exit
Overloading IP NAT inside source to the interface gigabitEthernet 0/0:
Router(config)#ip nat inside source list 1 interface gigabitEthernet 0/0 overload
Router(config-if)#exit
-----------------------------------------------------------------
Cover Topic:
cisco 2800 series router,cisco 2800 series router specifications,
cisco 2851 router details,
how to connect to cisco switch using usb console cable,
cisco putty, putty commands for switches,
how to console into a cisco switch without a serial port,
how to access cisco switch,connect cisco switch to home router,
cisco home network setup,connect cisco home lab to internet,
cisco router configuration,
cisco internet router,how to install cisco router,
configure cisco switch for home use,
cisco router to router connection,home network setup diagram,
best home network setup 2020,
home networking guide,cisco router setup,
how to connect cisco router to modem,home network setup service,
configuring cisco router for internet access,
how to setup a network switch for home networking,
home network switch,home network design,
how to setup a network switch and router

[@claudiobras22]

This is one of the best Networking real lab video tutorial i´ve ever seen. Well done.

[@itsupportpeople219]

Thanks for watching...

[@philip5693]

@@itsupportpeople219 yeah the best. Thank you for such a video, please continue to upload real-time configurations like this.

[@Slawek.K]

@@itsupportpeople219 could you please advise if this will not conflict with my current ISP router configuration and settings if I plug everything as on the video?

[@mohammedoluwa76]

I must confess, I have been looking for simple and clear explanations like this for years now, I am impressed. Well done and keep the good work up

[@itsupportpeople219]

Thanks for watching...

[@fredgaehring2008]

fantastic now to setup some passwords i have watched several videos and couldnt get it working i i was know it was me missing something but your excellent explanation of the details truly helped me

[@silindobophela6308]

I have an Interview on 22/06/2021 and this video is really helping me on reminding myself of everything Thank you sir for the video

[@itsupportpeople219]

Thanks for watching... Best of luck for your interview

[@RybeCroix]

Seriously a lifesaver was having such a hard time finding anyone breaking down the whole process. Thank you!

[@itsupportpeople219]

Thanks for watching

[@rider275]

I have a small home lab that I have used for Cisco studies. Your video will help me get started doing the initial configuration to connect my lab to the internet. Looking forward to the next video. Thank you!

[@sirnoble9183]

I planned building a home CCNA lab and your has boosted my confidence. Great job, keep it up

[@itsupportpeople219]

Thanks for watching

[@jitendrabisht2526]

Show ur CCNA lab

[@sudhirkuvardiya5122]

Great....Great...Great... Finally I Got Network LAB With Practical.. Thank You So Much Sir For Explaining Whole LAB.. Thank You..

[@itsupportpeople219]

Thanks for watching.

[@LamontezTezlamon]

It is 2024 and this guy is amazing!!! Thank you for this video!!!

[@bgrkaris]

Great respect from kenya

[@itsupportpeople219]

Thanks for watching

[@cauegodoy8621]

thanks for the content! I follow here from Brazil and currently I only find quality content on your channel

[@zachgranby7034]

no one explained these steps! thanks so much

[@JohnJohn-sf1df]

Very good! Thanks! Used this video to connect a Cisco 1841 router and a Catalyst 2960G switch to a DSL modem. Success!

[@DjGerardJones]

Thank you! This was the best explanation I have seen straight to point. I will be setting up my home lab soon.

[@EntrigueMagazine]

Thank you. this was extremely helpful. Enabling passwords and creating a host name would have also been a plus but this was still A++

[@itsupportpeople219]

Thanks for your compliment

[@abdullahisuleiman9276]

After I'm successfully connect to the internet with the Cisco router and switch can i disconnect the home router or ISP and it will continue browsing?

[@mosasa1307]

​@@abdullahisuleiman9276Subhanallah Abdullah. You cannot disconnect the ISP router or home router. The ISP router is what is giving you connection to the Internet. If you have your Cisco router or whatever lab router you're using, it HAS to connect to the ISP router and be in the same subnet as the ISP router because from their the ISP router is connected directly to the ISP network. So you need the ISP router. Anyone reading this, do no disconnect your ISP router thinking you'll still have Internet connection because guess what? You had Internet connection first with the ISP... how can you have Internet connection if ISP router or modem is off 😂😂

[@xikko50tao]

Congratulation on the explanation of the steps!

[@felaciosoares374]

thank you very much for the explanation ,, the best free video i have ever found on the internet

[@itsupportpeople219]

Thanks for watching

[@roberto663-v5m]

Nice job brother god bless always 🙏

[@stevebutchart3638]

FINALLY! Someone teaching a practical use guide instead of just toy examples. Thank you so much! I do have a couple of questions if you still monitor this Vid after 4 years, 1) When going from the ISP router to the Cisco Router, do Gi0/0 and Gi0/1 have to be on different networks? 2) If you don't mind me asking, where abouts in Australia are you from?

[@Conor3784]

One of the best start to finish guides, very thorough. I watched around 5 videos before coming here and this was the best by far for setting up new equipment. I could suggest adding in the setup of passwords for the routers/switches and explaining a bit of what each command does. Great video!

[@itsupportpeople219]

Thanks for watching...

[@Slawek.K]

​@@itsupportpeople219great video! Why you stopped posting content with real switches and routers? You are the best.I hope you will start again

[@aldrickentize8384]

Thank you sir,I am just a biggener learning this kind of work. more power to you.

[@sandipnjr9515]

Thank you sir for this masterpiece video..love and support from Nepal

[@ndwigz]

simple and straightforward setup. Thanks

[@md.mahtabuddin3979]

Great Work!! very useful for the beginners :)

[@EgidijusKabasinskas-y7h]

You forgot to mention simple command at the end of configurations :) write memory. Otherwise after turning OFF and back ON they'll have to reconfigure everything again. Didn't see IP-helper command too. Might be required.

[@TheDrewCrawford]

Very thorough explanation. Thank you

[@enmanueltejada13]

This is exactly what i needed!!!

[@asifmehmood123]

Well done. Thanks for recording this video. This video is very helpful & In detail everything. Please make more videos on every topic. Much appreciated

[@itsupportpeople219]

Thanks for watching

[@javiersaenz9330]

Thank you for your excellent explanation and great input. Congratulations!!!

[@ararulhaque863]

I needed this tut. It was really a good learning

[@shaonkumar1327]

Nice practical tutorial. Very much helpfully for absolute beginner.

[@itsupportpeople219]

Thanks for watching...

[@jensejoor]

Thank you sir for making such a informative video

[@ktume6]

Thank you So much. easy to understand for me as beginner !!

[@simionenalawanivonu3526]

Thank you very much ,clear tutorial

[@k.j.fatema7865]

Really very informative and practical video...

[@rp7302]

Fantastic I wanna get a Cisco router now for my house

[@dariiqali3486]

Thank you this video really helped me plz keep pushing more videos

[@Dmac4362]

Thank you very much. This video was great, please keep the content coming.

[@jadu1978]

Really best video.Thanks sir. we want more.

[@itsupportpeople219]

Thanks for watching

[@baskarmaintenance5893]

Very nice teaching sir 👍

[@chandang656]

Undoubtedly the best video

[@R67686]

Awesome 👌 explanations really unique video

[@TechEverything888]

Very nice work sir

[@bfar10host19]

Thank you so much sir for this very accurate, emphasized, and great video tutorial for CISCO devices configuration. More power to you man. God bless you. :)

[@itsupportpeople219]

Thanks for watching

[@obedrivera3808]

Thank you so much my friend, this tutorial helped me! 😃

[@philipjacob1979]

Thank you so much. Great job. I learnt more in this video than I could from a book. I have many books and they are very confusing. In future videos, could you also kindly explain very briefly, certain key commands, like for example, in this video: what does overload mean and do. Or what does ip route accomplish. etc. Thankyou again. Keep up the good work.

[@feerozbthapa]

Excellent vid, informative and practical. Basic but great start.

[@itsupportpeople219]

Thanks a lot for your compliment ...

[@ThangaPandiyan2024]

Very fine explanation

[@dennisclever5699]

you are amazing you are so smart. if i find you in real life i will give you 10$

[@NSA_TERMINAL_Official]

This is best sir 👍 ji

[@ndohcollins2050]

💯 benefits to me 👏, well explicit and understand

[@LifeofAdithya]

I help to in this video.Thank you sir

[@kvijay335]

Great work, appreciate 👍

[@siddiquesk5355]

Thanks bro Wonderful lab bro thanks 👍👍👍👍❤❤❤

[@chukwuelokaezekwesili6683]

Great tutorial. Thanks for taking the time to do this

[@tonytechsupport]

Can you tell me how to set this up using a 2960 L2 Switch? I ordered a L3 to practice on doing labs. The labs are better when you can reach the internet after making changes.

[@ilyaskhan-ek8ik]

Thanks. it is a very useful video for beginners.

[@mishaeltilahun1857]

best vedio ever in my opinon keep going man

[@itsupportpeople219]

Thanks for watching... Please like my Facebook page kzbin.info?q=https%3A%2F%2Fwww.facebook.com%2FIT_Support-PeopleDesktop-Support-111268543923018&event=video_description&v=rRgdlhSbczU&redir_token=QUFFLUhqbkxCOXhJU1hJQ1c1QlJUbjhqMllzc3ZrR2ZjZ3xBQ3Jtc0trenZ1Z2xFeWViai00QXpnaFpxa0g3X19DeDluSl9PN0FSc0dhT0FWaDN0WTFfeUhCYXVQalJPS05ZQ2lja0VFdU5kd1V6UWQ0dTh0MG5aRjctMjB5bzNYSEN5SVgxMDdqT3lJUVRabkxWNzBPR1N2Yw%3D%3D

[@bodiaub]

I like way of teaching Zero-goal.

[@abfarah2769]

Great work, really like the way you do. Thanks for sharing this wonderful real lab with us.

[@itsupportpeople219]

Thanks for watching

[@cristianhernandez3099]

You are amazing!!!!!!!!!!!!! Thank you so much for this amazing video !!!!!!!!!!

[@nxgrey1492]

Can we connect switch directly to the home network? Without using cisco router

[@TwilightChaderAlo]

so nice. it is helped me to solve lot of problem

[@itsupportpeople219]

Thanks for watching

[@fredgaehring2008]

GREAT VIDEO PLEASE CONTINUE

[@Darkl0ud_Productions]

Very well made informational video man! Good job and thanks for the help!

[@omg2026]

This is great. This is what I’ve been looking for all along. Thank you so much sir. Keep them coming. I’m subscribing!!

[@itsupportpeople219]

Thanks for watching

[@deepakkhadka9984]

Very good video. Thanks

[@erolmercury9982]

Danke! Greeting from Germany.

[@hameed.technologies]

the cable u used bw isp router and cisco router is straight throug or cross over?

[@techworksinfo]

Very Good Brother

[@royallion2634]

@IT Support People when you do the NAT overload on the router, why is it: ip nat inside source list 1 "int g0/0" and not "int g0/1"? I thought g0/0 was outside and g0/1 was inside?

[@adilsondiogo2424]

Excellent tutorial.Thank you very much

[@itsupportpeople219]

Thanks for watching

[@fadhilzain1992]

hi what if you have cisco ap (for wireless capability) connected to the switch , what would be the configuration be like.

[@17TheVIP]

Excellent example well done man

[@itsupportpeople219]

Thanks for watching...

[@fazelshah1507]

Best video Share more videos plz

[@itsupportpeople219]

Thanks for watching

[@fazelshah1507]

@@itsupportpeople219 share more videos please

[@joachimmbala]

Fantastic demonstration. bless you!

[@itsupportpeople219]

Thanks for watching

[@famenyah3829]

Thanks for this video bro. This is great stuff

[@ChristianGrenier-ji7pm]

Thanks a lot!! I really like this setup. i have the same routers, so I can follow your video to install my devices.

[@itsupportpeople219]

Thanks for watching...

[@susannachela5741]

Very helpful

[@itsupportpeople219]

Thanks for watching

[@bawaerode4782]

Nice work out

[@veoquenoesunproblema]

I'm studying Eng. and I think that doing this, applying a router and a switch is extremely overkill but then I think: hmmm, let's try this haha. In my opinion unless you are an average US guy that needs to buy stuff just to preserver the way of living, or if you do not need to have a lot of things connected, this is crazy setup that I would like to have to increase my bill for nothing haha. But I'll have one too haha.

[@itsupportpeople219]

Thanks for watching...

[@rohitshrestha101]

Thank you sir for making such a informative video 😊👍

[@itsupportpeople219]

Thanks for watching

[@satisfyingsounds3044]

Thanks it's perfect Video

[@fltinfra858]

Its great video!

[@TheYrius]

Awesome! Thank you for such an informative video! One question though, can I connect directly from the ISP router to the lab router without using the home router?

[@ismt101]

Yes you can directly connect the isp provided cable to your lab router. But ask your isp if you have to buy a modem separately, if they say yes than connect that isp provided cable to the modem and from that modem connect your lab router.

[@itnetworkingvideos9388]

Good lab for beginner

[@ameenal-azzawi2180]

Just Amazing mate...

[@itsupportpeople219]

Thanks for watching...

[@kassosouleymane2]

Thx for your video, i have one question? If you connecte with your home wifi are you able to ping 192.168.2.X ???

[@aurelradu4340]

This video really helped me. Thanks a lot! Bravo!!!

[@itsupportpeople219]

Thanks for watching...

[@IQRAQURANREAD]

Nice 👍

[@yogeshvagh6645]

Nice concept 🙌🙌

[@joekudakallumkal]

This is really great man,expecting a office private network configuration lab video soon if already did that plz give us a link.. Thank you for your effort on this.😍

[@itsupportpeople219]

Thanks for watching...

[@cresrey5961]

very informative tutorial, thank you brother

[@itsupportpeople219]

Thanks for watching

[@vaibhavmahajan4668]

Hi need of some help, Its possible to connect 2switch by fiber in which one is Cisco and other is tplink and its possible then which sfp- is required

[@srikantm175]

Thanks a lot to you sir for sharing this with us.

[@itsupportpeople219]

Thanks for watching

[@fidelcastro1970]

you are the best

[@itsupportpeople219]

Thanks for watching

[@kishorbharaskale7806]

Thank you so much sir

[@kedrickofori4655]

that was a very great job, well done boss

[@itsupportpeople219]

Thanks for watching

[@parkingcase1447]

Thank you so much man. Much appreciated.

[@MrOse-nh5pd]

Never been this easy

[@itsupportpeople219]

Thanks for watching