Connecting a Donner N-25 MIDI Keyboard to a Teenage Engineering K.O.II EP-133

The EP-133 MIDI ports are wired TRS-A
The Donner N-25 MIDI Out port is wired TRS-B
The solution - a RETROKITS 3.5MM TRS A TO TRS B MIDI ADAPTOR (TRSAXB-D) available from:
UK: www.signalsounds.com/retrokit...
Other Countries: retrokits.com/about/

[@ChrisSkitch]

Related Reddit post - www.reddit.com/r/teenageengineering/comments/19bq4t8/connecting_a_donner_n25_midi_keyboard_to_a_ep133/

[@narekchannel]

Hi Chris, could you please advise if I can use the sustain port on my AKAI MPK MINI PLAY to connect to KO II or should I use a MIDI HOST and connect the midi keyboard to it with USB and then the midi host to the MIDI in of KO with a midi cable (5 pins to TRS) ?

[@PHILIEANO]

I’m trying to figure out the same thing. Any insight on the subject?

[@narekchannel]

@@PHILIEANO a midi host like Doremidi should be purchased - is the only idea left after some back and fourth.

[@cresshead]

Q. how do you set the midi channel? example my Roland SP-404mkii needs: 1. channel 16 setting for notes 2. channel 11 for vocoder the online manual has no reference to setting a midi channel at all.

[@ChrisSkitch]

It's my understanding that the Donner N-25 is locked to MIDI channel 1 and I did not need to set a channel on the EP-133. Actually I have no idea if it's possible to set this. I suggest posting this question to the TE subedit - www.reddit.com/r/teenageengineering/