Connecting all CAPs to the MikroTik CAPsMAN

[@kretek1]

the simplest explanation of CapsMAN I've seen so far 👍👍👍👍

[@matthewrossouw7136]

This is the only Tutorial that actually worked!!! Thank you very much

[@johneyre4986]

Thanks Maher, another great tutorial, nice to get the explanation of what things are and what the abbreviations mean, without missing out essential steps.

[@exanime]

This video was a pleasure to watch... excellent and clean explanation... I just got 2 Mikrotik APs and this video came in god-sent!

[@lucassellers8911]

Wonderful starter video - really appreciate the explanation of each step.

[@afirdaus068]

Very useful tutorial and worked well. Thank you sir..

[@phillipellison1222]

As always thank you for another great video

[@syed9640]

again bro many many thankx for wonderfull explaination...JazakhAllah khairan

[@alexachi6231]

thanks for this lecture. it was very informative.

[@sheprev]

thank you for a well detailed video. Can you please do the second segment on the CAPsMAN configuration

[@boytongo]

This is very helpful. I just want to ask if I could add APs that is not a mikrotik brand to the Capsman like Dlink AP, Cisco, etc.. Thank you..

[@MissionStreet]

Great tutorial. But, does Capsman work in hEX model (without the wlan1)? It stopped on mine as soon as I was on Wireless > CAP. Maybe you have a presentation on hEX for CapsMan? Are there specific APs the CapsMan will work with or can I use any generic AP? Thanks,

[@hosseink5293]

very very good .thanks you man. from iran

[@mirmigois]

It is excellent tutorial. I registered on udemy curses but i still have a question, which steps i must configured first in order to use wireless interface as discover interface on CAPs AP?

[@dtavares85]

Awsome explanation!!!

[@ariefabdullah2822]

the tutorial so detailed, thank you. maybe you can more make video on the capsman and the troubleshooting

[@syed9640]

For LAb which model ur using I have rb750gr3 i dont see in capsman CAP interface is unknown?For capsman i need mikrotik wireless or some other brand access point ?

[@kopparsulfat]

Damn good video. It helped a lot.

[@ericmantalaba]

Hi Sir, I'm new to this CAPSMAN, i have a question. Example you have hAP lite on your AP2, and you add attached its ports (ea either 4 and 3) with a non Mikrotik base access point (by bridging all lan port) will it be still be managed by the CAPSMAN?

[@garyclack1130]

Hi. I have three Mikrotik routers. One is the main router for internet the other two are AP. I do not have a switch. The first AP is conected to the main router with a ethernet cable from ether2 to eher1 on the AP. The escond AP is conecred with a lan cable from the first AP from ether1 to ether1. Will Capsman work with this set up?

[@pawelprusinski5251]

Thanks, great tutorial

[@takacsi]

do I need the cert if I just have only one capsman in my network?

[@Tad3j]

Will there be a part 2, to explain how to configure CAPsMAN settings, what it is important to set?

[@MAICT]

The complete course is available here for only 9 Euro for lifetime access: mynetworktraining.com/p/mikrotik-capsman-with-labs

[@r011and]

Can MT hAP AX3 work as a CapsMan manager and at the same time be an access point managed by CapsMan?

[@drreality1]

I'd be so grateful if you could kindly do a tutorial on how to wds mesh. Thank you again

[@iambookey]

This is so informative, however, I need to ask this question. Can I do this configuration through PoE port

[@evolagenda]

Yes, I just did it.

[@iambookey]

@@evolagenda can you please explain or give me steps to follow

[@botrasone]

thank you Sir,

[@XDarkstarXUnknownUnderverse]

How do you do this for wAP AC for both bands on the same interface in CAPSMAN

[@CyberCam1969]

Great Video!

[@MAICT]

Welcome

[@HarishSharmaDelhi]

CAPs will only work if the router on the other side is also a Mikrotik. Is that correct assumption?

[@talktomesek]

Nice tutorial how comes the caps are not connected to port 1 from the switch

[@gastonsenac]

@@talktomesek Do you mean in the Mikrotik? you can use any port. Also it's using layer 2, not TCP, so it doesn't matter. The mikrotiks are reseted with blank configs.

[@drreality1]

Great video. Thank you

[@MAICT]

You are welcome

[@daxvilbar7761]

Does tp link access point work in CAPsMAN?

[@B-a_s-H]

No. CAPsMAN is only for MikroTik hardware.

[@KEPKE]

No user changes? And admin without password on CAP's?

[@MAICT]

This is just a LAB. You always require to change the admin user and put a password

[@KEPKE]

I had seen a lot of CAP's without passwords in my country.. because lot of people activate CAP with physical button on AP and doesn't change any configuration in it.

[@user73nsnskAjd]

You need to show your Taskbar cause I thought you were busy with 1 Winbox Session, all along you had 2 Winbox Sessions and I couldn't understand why all the steps I followed had been incorrect 🤦‍♂️

[@garyclack1130]

Hi. You say there is no configuration on all three routers, surely the first router has a configuration, because it is connected to the internet.

[@MAICT]

On the wireless part no configuration

[@mohamadshahmanesh3350]

👌🏻

[@freddymackolani9926]

comment augmenter la bande passante avec une antenne ubiquiti m5 connecter a internet