10 Creative Uses for a Workshop Laser - Creality Falcon2 Pro

[@MileyonDisney]

8:15 - in 1965, I got a Spirograph for my birthday. I understand they may still be around. But this guy makes his own!

[@LaxLegion]

man straight up created 10 individual sellable products non chalantly amazing work, this sells harder than entire creality's marketing, subscribed

[@ConnorHolland]

Thanks!

[@Subsonik762]

I wonder what effect (if any) the spirograph embossing or laser etching would have on the materials behavior during hydroforming... have you experimented with that?

[@ConnorHolland]

The pressure from hydroforming is a very strong force, that would be hard to effect. But it would be a good way to add decorative designs before inflating, which I'll do for a future laser video

[@LWJCarroll]

07:03. Excellent colours here while other people don’t get as good. ? To do with the metal used? Thanks. Laurie. NZ. 😊

[@ConnorHolland]

I get better results using brushed stainless steel, which is also clean and uniform. I did lots of tests to work out the best power settings, as even a change of 1% makes a difference

[@randomvector78]

@@ConnorHolland really good stuff! Nice to see a variety of projects. I just got the 22W model and just starting off with paper craft and wood. How do you get colours to etch on stainless steel?! Different power setting per layer? Cheers!

[@ConnorHolland]

@@randomvector78 Thank you, on 1mm thick brushed stainless I use 6000mm/min speed and 46% power for a gold colour, and 58% for blue, laser module set to precise which is 22W

[@randomvector78]

@@ConnorHolland thanks for the reply! Will give it try :)

[@ConnorHolland]

@@randomvector78 I'm going to post a quick tutorial video about laser colour etching in a couple of days

[@shawnwalsh3502]

Amazing work! For the stainless steel coasters, is there a reason you cut them to their final size manually instead of using the laser? I have never used one of these so I'm just curious.

[@ConnorHolland]

It is 1mm thick stainless, and unfortunately this 40W diode laser can only cut up to 0.15mm thick

[@tisahhenson]

Hello do you mind sharing what settings you have used for the stainless steel. Im trying to see if i can etch on stainless steel jewelries im new to laser engraving so I still struggle with settings. By the way I have the 22w Falcon2 Pro version

[@ConnorHolland]

Here are the settings I use for etching colours onto 1mm thick Brushed Stainless Steel (Using 22W): Speed 6000mm/min Power 38% Light Gold, 47% Gold, 50% Dark Gold, 55% Dark Blue, 60% Blue

[@rafazdanowicz8833]

What honey comb do you use ?

[@ConnorHolland]

Twotrees 50x50cm, made from steel so magnets can be used

[@sahinunsal9457]

is it possible to send to me picture frame ?

[@JohnJones-oy3md]

Creality rep is like - "Why he no talk? We ask for honest review. He give mime show." 🤣

[@paladro]

))

[@arieliten26]

Cut metal??

[@ConnorHolland]

It can cut 0.15mm stainless steel: kzbin.info/www/bejne/bXLSg4KhpNyif7s