Here is the completion of the console safe and Dara holster into my Tundra. Console safe: www.sparkspart... Dara Holster: www.daraholste...
Пікірлер: 76
@kcscott38604 жыл бұрын
Glad I stumbled onto this video. I had installed a Gunvault Microvault in my Tundra but it quit working less than 6 months (No explanation from gunvault other than cold weather). Wasn't even aware Toyota offered this option. I just finished installing my Toyota Console safe and it went in as easy as you showed and I'm really happy with it for $270. Wish I would have know about it before wasting $100 on the Microvault
@richardfcarson6883 Жыл бұрын
Can you tell me how you mounted the round mount base to the safe? Thanks
@gearrunner Жыл бұрын
I mounted it before I installed the safe. Drilled 4 holes and used 4 small bolts
@RobMotive6 жыл бұрын
Looks great! Very good install and addition of the holster.
@gearrunner6 жыл бұрын
ThrobbNation Thanks Rob. I really like how it turned out. The install is very easy also. I really like easy installs.
@johnwayne21036 жыл бұрын
I really like that safe. Very stealthy unlike that contraption you put under your back seats and cut up the carpet.
@gearrunner6 жыл бұрын
John Wayne Yep this really fit the bill for what I was looking for. Easy install and very secure. 👍
@digitalunit3185 жыл бұрын
I just installed the safe in my tundra. I used the old felt and cut two pieces to for in the tray. Make stuff slide around less and is less noisey.
@Johnny-bx7tb3 жыл бұрын
You always provide good info. Thanks
@davidcaram83632 жыл бұрын
Have the same setup in my 19 Tundra, Dara/M&P Shield
@joshuacabjuan47082 жыл бұрын
How’s your holster seating like that
@david.westergard99596 жыл бұрын
Awesome man 👍 As long as it’s locked away is everything all fine and legal? You don’t have to take the clip out, or trigger lock?
@gearrunner6 жыл бұрын
David. Westergard Where I love you can have a loaded weapon in your vehicle even without a carry permit. I do have a CCW so all the states that reciprocate my permit I’m total legal in. Which I usual don’t go to states that don’t!
@teller1213 жыл бұрын
I wonder how this item compares to the one done at "Lock'er Down" out of San Antonio? I'm thinking of ordering it due to having electronic lock and 10-gauge lid (and a magnet [$20] for handgun in lieu of holster arrangement). Their door is spring loaded and safe comes in full size or half-size for $339-$349. The electronic combo feature (not mandatory) is an extra $150 but allows you to open safe on the move without going for a key, simply by turning lever on unlocked safe.
@bsu19606 жыл бұрын
Nothing but great videos here buddy thanks for the useful information
@gearrunner6 жыл бұрын
bsu1960 Thank you. I really appreciate that. 👍
@rush17646 жыл бұрын
Would love to have the Dara Holster in my safe. They don't make it for the Kimber Ultra Carry II.
@gearrunner6 жыл бұрын
Jebediah Dewmist I would call them and see if it’s something they can make for you. Good luck they are nice people.
@danz49282 жыл бұрын
Hey Andy! Do you have the part or serial number for the Dara Holster for the tundra vault? Much appreciated!
@lennyperry6210 Жыл бұрын
I’m needing it as well.
@derekcomingo21976 жыл бұрын
nice u keep ur outlet too
@TheBoardWoodworker6 жыл бұрын
Looks like a very easy install. It would be nice to have but I don't know what i would lock in it.
@gearrunner6 жыл бұрын
EDGE everyday it was an easy install. You could always stick Kourtney in it if she was being bad! 😂😂
@johnwayne21036 жыл бұрын
Um your Gun?
@gearrunner6 жыл бұрын
John Wayne Nope the safe
@jamesnagle2134 жыл бұрын
How did you install the holder for the holster? Did you drill thru the safe ?
@gearrunner4 жыл бұрын
James Nagle I did
@trebep3 жыл бұрын
@@gearrunner Did you order the "flat surface mount"?
@gearrunner3 жыл бұрын
@@trebep I believe it was. It’s been so long I can’t quite remember
@Gab17945 жыл бұрын
Is the safety box fit on 2019 toyota tundra 1794 edition?
@gearrunner5 жыл бұрын
Gregory Allan Bernal On Sparks Parts web site is says it will fit it.
@Gab17945 жыл бұрын
Gear Runner thank you!!!
@gearrunner5 жыл бұрын
Gregory Allan Bernal Your welcome
@davidmoseley16674 жыл бұрын
It's not fitting mine. I have a 2019 tundra limited TRD. The console has a lip inside, front and rear, for the big tray to slide side to side on. It is rivited so it looks like i must drill it out! 😣😣😣😣😣😣😣😣😣
@Nflguy49492 жыл бұрын
Would you still recommend this safe? I’m curious how it compares to the factory/dealer installed safe option.
@jrbeltre9276 жыл бұрын
Love your videos brother. I AM IN THE DOMINICAN REPUBLIC , I OWN A 2011 TUNDRA. LOOKING FOWARD TO DO TJE SAME MODS TO MY TRUCK. DARA HOLTERS MAKE ONE FOR MY CZ 75 ?
@gearrunner6 жыл бұрын
JOSE BELTRE I just checked and it does appear that they make one for the CZ 75. 👍
@jrbeltre9276 жыл бұрын
Thanks man
@gearrunner6 жыл бұрын
JOSE BELTRE Your welcome. 👍
@TheVyperone6 жыл бұрын
Could you post link for the safe and holster setup please
@gearrunner6 жыл бұрын
TheVyperone Just did it. 👍
@TheVyperone6 жыл бұрын
Gear Runner ...Thanks
@gearrunner6 жыл бұрын
TheVyperone Your welcome. 👍
@greymanmedia61186 жыл бұрын
Thank you for the reply. Also (in your opinion) is the safe deep enough for a full size glock frame for a glock 22 (20) with holster and ram mount? Was ram mount and holster installation as easy as the safe install?
@gearrunner6 жыл бұрын
GREYMAN MEDIA It was very easy to install I have several videos on the installation of it. I think 3 in all. As far as a full size Glock, my 19 sits perfectly in a draw stroke position. A full size would have to be angled back more in my opinion. Not saying it wouldn’t work but maybe not at the same angle as mine. I do believe I have some more room that I could have lowered the holster. I am at the beach on vacation right now or I would go check for you, but I do believe there is room to move the holster down.
@drumwish20104 жыл бұрын
what model is the holster will it fit a smith & wesson 40cal.
@Biggrip886 жыл бұрын
How do you mount the holster in the safe.
@gearrunner6 жыл бұрын
kzbin.info/www/bejne/mom3Z4aLebtpna8 here is the link to that video. Hope it helps 👍
@docric5 жыл бұрын
Another great video with some good info. Gonna look into this...hoping they make it for a Ford Explorer. Is there any rattle or creaks or any sounds while driving? I'm one of those that dont like to hear anything rattle while driving. Lol. Again good video 🤙💯✔💪
@tideishigh89906 жыл бұрын
To bad they don't make it for the Kimber Ultra carry 2.
@barrybrown78925 жыл бұрын
Are both compartments the same depth or is the safe side more shallow? Do you know thickness of the steel, 12 gauge steel?
@anew12975 жыл бұрын
Hey Gear! Do they make a holster mount for a revolver? Btw... Great review, thank you
@gearrunner5 жыл бұрын
A Newcomer Thank you, and I just checked and I didn’t see any for revolvers. I would contact them and see if they can make you one. I don’t know if they can but worth a shot.
@anew12975 жыл бұрын
@@gearrunner Thank you
@gearrunner5 жыл бұрын
A Newcomer Your very welcome. 👍
@emarroquin776 жыл бұрын
Just came across this. I am going to have to do this model as well. Question I have is could you mount it to the bottom of the safe instead of the front side. Is there enough clearance on bottom for the screw heads?
@greymanmedia61186 жыл бұрын
What mount is that you used to hold the holster?
@gearrunner6 жыл бұрын
GREYMAN MEDIA The mount and holster is from a company called Dara. It’s their RAM holster. It works perfectly. Here is the link to it. www.daraholsters.com/light-bearing-ram-mounted-vehicle-holster/
@asaffarfar15295 жыл бұрын
So what type of holster and how did you attach it to the safe. I have the full size safe and I attached my holster on a wood plate and glued it to the side of the safe with gorilla glue. So far no issues it’s held up over a year but like your set up as well?
@NightHawkBros6 жыл бұрын
Good stuff!!!
@gearrunner6 жыл бұрын
Shooter Media Outlet Thank you. It really fit what I was looking to do.
@carlosfernandez15 жыл бұрын
Did that box com for the Tacoma?
@Som1getDvagisl6 жыл бұрын
Where did you get the safe?
@gearrunner6 жыл бұрын
Som1getDvagisil I ordered it from sparks parts. If you use tundradude34 promo code you can get 5% off.
@fernandosalazar40965 жыл бұрын
What model holster install you used? And the base I try to do the same in my truck Thanks
@mikelp82656 жыл бұрын
What model is your holster .
@locster736 жыл бұрын
Do you have a video of how you install the Dara holster?
@gearrunner6 жыл бұрын
loc huynh kzbin.info/www/bejne/mom3Z4aLebtpna8 this should be the link to that video. 👍
@alexcortez47745 жыл бұрын
Nice
@freedreaming24826 жыл бұрын
You think you can install a spring on the door to make it pop up once opened
@gearrunner6 жыл бұрын
Freedreaming I really don’t. The door is to sluggish for that I believe. It’s also pretty heavy for a small spring.
@freedreaming24826 жыл бұрын
Gear Runner im interested in the same safe. I was looking at the lockerdown safe but i like having the space on the side for papers etc. Im going to look at the lockerdown safe lid. It has the springs in it.
@rudystraight17504 жыл бұрын
You're gonna need it. Martial law with UN troops deployed here is coming