Constructing a Regular Pentagon within given Circle By Using Ruler and Compass

  Рет қаралды 789,260

Technical Piping

Technical Piping

Күн бұрын

This video explain about How to Constructing a Regular Pentagon within given Circle By Using Ruler and Compass tool
Polygons are frequently referred to have particular names. Some of these are listed below.
A pentagon is a plane figure bounded by five sides.
A hexagon is a plane figure bounded by six sides.
A heptagon is a plane figure bounded by seven sides.
An octagon is plane figure bounded by eight sides.
A nonagon is a plane figure bounded by nine sides.
A decagon is a plane figure bounded by ten sides.
Watch and Subscribe: / technicalpiping
Likes : / pipingtechniques

Пікірлер: 88
@gruuve
@gruuve 4 жыл бұрын
For anyone thats interested: Music: Tarazanio - Jazziano
@sonny2435
@sonny2435 4 жыл бұрын
WTG, @2:09, YOUR SPONSOR POPS UP AND BLOCKS THE WORK IN PROGRESS !!
@r.bhandari2560
@r.bhandari2560 4 жыл бұрын
Yes ,you are absolutely aright
@blossom5143
@blossom5143 3 жыл бұрын
thx u 🥺❤️ heh.. I'm done on my assignment 😭❤️🤭✨
@VIDEOEPPO
@VIDEOEPPO 7 жыл бұрын
I am about to make a fidget toy in the shape of a pentagon. This video really helped me. Thanks
@Babi-nw7iw
@Babi-nw7iw 2 жыл бұрын
good video
@musiclibrary894
@musiclibrary894 5 жыл бұрын
I think we can make it in a very easy way But this method helps to learn a lot if we understand each step
@jessebosma9348
@jessebosma9348 4 жыл бұрын
Thanks mate, it uses the flower of life also
@Sahudamen
@Sahudamen 2 жыл бұрын
Fast easy 👍
@marichat6403
@marichat6403 3 жыл бұрын
Thank you .I finally can finish my maths activity
@laveenadsouza1793
@laveenadsouza1793 4 жыл бұрын
Well explained. Easy to follow. Keep it up!
@abdullahkhattak7568
@abdullahkhattak7568 4 жыл бұрын
Thank you sir! by the way what's the name of music in the video : ]
@fa2-xh217
@fa2-xh217 3 жыл бұрын
Jazziano
@numbr6
@numbr6 7 жыл бұрын
I've done a construction with compass/ruler of a regular pentagon/pentagram. This one seems simpler. I'll give it a try.
@ross.shevchuk
@ross.shevchuk 4 жыл бұрын
Thank you, very helpful))
@avniagarwal4355
@avniagarwal4355 5 жыл бұрын
Awesome method
@MilkingMikky
@MilkingMikky 6 ай бұрын
What about dividing into portion
@barishrahaman2768
@barishrahaman2768 5 жыл бұрын
nice background music
@senuwarasamarakoon8855
@senuwarasamarakoon8855 3 жыл бұрын
Thanks a lot 🙏
@technicalsurjeet332
@technicalsurjeet332 5 жыл бұрын
Very helpful
@aadarshpatelyt
@aadarshpatelyt 5 жыл бұрын
Tq sir
@psilvakimo
@psilvakimo 5 жыл бұрын
Golden rule number .5*(1+sqrt(5)) helps. Half of that is sin(54 deg).
@amoldharne5483
@amoldharne5483 6 жыл бұрын
Good method
@fathimaihshana8590
@fathimaihshana8590 3 жыл бұрын
👍👍
@ashanigam7569
@ashanigam7569 6 жыл бұрын
Very easy n nice
@juliocalderon3086
@juliocalderon3086 5 жыл бұрын
Soy....profesor de: DIBUJO TECNICO Expecializado ....... (...)
@ramchandrakumar7673
@ramchandrakumar7673 4 жыл бұрын
Supab
@13kkja13
@13kkja13 3 жыл бұрын
FYI, you are using dividers which are only good for measuring. A compass , which has a geared wheel in the center, should be used for drawing circles since it is much more accurate.
@joelsanni1696
@joelsanni1696 11 ай бұрын
Seriously what the heck🤔
@joelsanni1696
@joelsanni1696 11 ай бұрын
You musn't say that to hurt him or her
@13kkja13
@13kkja13 11 ай бұрын
@@joelsanni1696 Musn't say what? I was just pointing out the differences between the tool being used, and that there's a better option. (35+ years as a professional draftsman)
@mitchelawino6566
@mitchelawino6566 2 жыл бұрын
The drawing are very invisible I don't understand
@Saiffffwooo_17
@Saiffffwooo_17 9 ай бұрын
Wow i has very invisible
@mariaguadalupesanchez5744
@mariaguadalupesanchez5744 2 жыл бұрын
Porque no lo hablan para que sea más claro
@t.d.mich.7064
@t.d.mich.7064 5 жыл бұрын
Set the dividers at 50 m.m. and then show 60 m.m. The finish product showed some error on the last point of construction,
@yogendrarazzput5335
@yogendrarazzput5335 7 жыл бұрын
Good
@dayanaalfonso5831
@dayanaalfonso5831 4 жыл бұрын
pero porque en ingle???????
@blackflowers7785
@blackflowers7785 3 жыл бұрын
Sangat mendidik
@TECHNICALPIPING
@TECHNICALPIPING 3 жыл бұрын
Selamat datang😊
@skydragon3857
@skydragon3857 7 жыл бұрын
nice music
@musiclegend8167
@musiclegend8167 3 жыл бұрын
Ye song to hotstar ke ad me aata hai😂😂😂
@joe_biden2366
@joe_biden2366 4 жыл бұрын
Yo any body else vibe to the playboi carti in the backround of this mans video
@darisseannsendayen1409
@darisseannsendayen1409 7 жыл бұрын
Tried it longer than 50mm so many times and it's just not accurate :(( But the 50mm worked.
@numbr6
@numbr6 7 жыл бұрын
Funny you sound say this. I tried something of this scale initially, and it worked out. I figured larger would be better, as there would be fewer "rounding errors", but I've encountered the same issue as you. This doesn't scale up. Which means there is "flaw" which is hidden with a 50mm circle, but is revealed with a larger circle, or something else is wrong. Notice at the end of this video the 5th line segment doesn't "exactly" line up with the starting point. That could be an indication this method doesn't yield a perfect 72 degree angle. I've never seen a technical description of why this construction works. It could be this is close to a pentagon, but not exact. This is still better than free-hand drawing a pentagon. :)
@gurukripa9750
@gurukripa9750 5 жыл бұрын
Oo
@gurukripa9750
@gurukripa9750 5 жыл бұрын
Very hard method
@patrickschmidt7821
@patrickschmidt7821 3 жыл бұрын
It can be shown that it does work using geometry, algebra, and law of cosines. It is not an approximate method. Errors in construction are of course possible.
@pirobot668beta
@pirobot668beta 2 жыл бұрын
The last step, marking off the circle with the points, is the source of error. Stepping around the circle in one direction will introduce an error, as seen. The length used in stepping is a tiny bit off, so the marks are slanted in that direction. Step around the circle, using the same starting point each time, but a clock-wise pass and an anti-clockwise pass. Each point on the circle now has two 'steps', instead of one. Clock-wise steps drift one way, anti-clockwise steps drift the opposite way, at the same rate. The intersections of the step-marks is the correct central angle for the pentagon. Draw a line from the center of the circle through the step intersection, and where that line crosses the circle, make your dot. Connect the dots, Pentagon!
@PhilipBlignaut
@PhilipBlignaut 8 жыл бұрын
Way too fast to follow!! Slow down!!
@numbr6
@numbr6 7 жыл бұрын
Pause button.
@ashishpatel4862
@ashishpatel4862 6 жыл бұрын
Kya bhai etni der me Pentagon bnaya toh time hi nikel gayega
@new6315
@new6315 5 жыл бұрын
You're wrong
@pippishortstocking7913
@pippishortstocking7913 4 жыл бұрын
Hands are in the way too much. Might as well blur it all.
@user-S9AS7GN8
@user-S9AS7GN8 22 күн бұрын
Hi
@sabanoor5331
@sabanoor5331 6 жыл бұрын
very tough method , very light lines please use dark pencils😕
@marichat6403
@marichat6403 3 жыл бұрын
Yeah
@elisebaker9879
@elisebaker9879 3 жыл бұрын
That literally made 0 sense and i thought as a grade 7 student, I’d be able to understand
@mahnoormoonlight3718
@mahnoormoonlight3718 3 жыл бұрын
Your school probably uses a different method or you're just dumb
@dayashankarmaurya725
@dayashankarmaurya725 4 жыл бұрын
I didn't understand this method
@akhileshchauhan797
@akhileshchauhan797 6 жыл бұрын
4-semester ka isometrik project chahia
@Mr_Secrate__
@Mr_Secrate__ 6 жыл бұрын
Wrong...🙏
@gurukripa9750
@gurukripa9750 5 жыл бұрын
Very hard method
@AkashKumar-sk6et
@AkashKumar-sk6et 5 жыл бұрын
Akash
@susheelpatel7371
@susheelpatel7371 6 жыл бұрын
are hmare samagh m nhi avay bhai
@TheFact354
@TheFact354 5 жыл бұрын
Happy sale
@joelsanni1696
@joelsanni1696 11 ай бұрын
I love your videos I am just trying not to hurt your feeling I hate them like seriously what the ****is this just kidding it helps and 13kkj or y stop saying nonsense
@umethpeiris9448
@umethpeiris9448 6 жыл бұрын
Sorry this was a bit too fast and complicated..
@TECHNICALPIPING
@TECHNICALPIPING 6 жыл бұрын
omg,,sorry for inconvenience..
@bautistaconcon5719
@bautistaconcon5719 3 жыл бұрын
urcopy writing make ur own better.
@jacobwells100
@jacobwells100 5 жыл бұрын
Why do you have to make drawing a pentagon so fucking complicated there are better ways than this that don't involve re aligning the planets..
@manjuanthamanjunath3044
@manjuanthamanjunath3044 5 жыл бұрын
try in other simple method its easier
@aniketshelke6986
@aniketshelke6986 5 жыл бұрын
Very Hard method
@izzidenhijazi6078
@izzidenhijazi6078 5 жыл бұрын
Bad
@rajeshshrestha4190
@rajeshshrestha4190 7 жыл бұрын
Haha so black hand
@TECHNICALPIPING
@TECHNICALPIPING 7 жыл бұрын
thanks.....hee heee heee......
@prachiteeshetty9286
@prachiteeshetty9286 7 жыл бұрын
Racist
@afolabiwilliams750
@afolabiwilliams750 6 жыл бұрын
RACIST I:( not cool
@nilanjannandy2562
@nilanjannandy2562 6 жыл бұрын
RAJESH shrestha Color does not matter His color can be black but he is smarter than you See his efforts that he is making to make us understand
@jothain
@jothain 5 жыл бұрын
Wtf? Does some actually not know how to do this? I thought this was thought at school as kid.
@laughingbird1441
@laughingbird1441 5 жыл бұрын
Good
@laughingbird1441
@laughingbird1441 5 жыл бұрын
Good music too
@vikasmahato2936
@vikasmahato2936 5 жыл бұрын
Hi
How to draw a pentagon - Method 3
3:11
Wimmas EGD
Рет қаралды 735 М.
How to draw all polygons, draw all polygons easily
5:57
ADTW Study
Рет қаралды 372 М.
SLIDE #shortssprintbrasil
0:31
Natan por Aí
Рет қаралды 49 МЛН
진짜✅ 아님 가짜❌???
0:21
승비니 Seungbini
Рет қаралды 10 МЛН
How to Inscribe a Polygon inside a Circle || General Method
2:52
Draw pentagon with compass, inscribe a given circle.(Step-by-Step)
3:01
How to draw a Pentagon.
3:41
Wimmas EGD
Рет қаралды 215 М.
How To Solve The 6s Challenge
8:08
MindYourDecisions
Рет қаралды 6 МЛН
General method to inscribe a hexagon inside a circle.
2:54
ADTW Study
Рет қаралды 62 М.
CONSTRUCTING REGULAR POLYGON USING PROTRACTOR AND RULER
4:31
Jayson Loayon
Рет қаралды 4,1 М.
How to draw a hexagon.
2:46
Wimmas EGD
Рет қаралды 700 М.