Рет қаралды 1,852
I have explained about contactor wiring and how to implement holding or latching circuit in Contactor and connect indicator light
earn how to connect panel lights into your circuits like a self-holding circuit, star delta forward reverse and automatic changeover switches How does a holding circuit work? They "hold" closed or open mechanically after a pulse of voltage energizes the coil. An electrical relay whose coil is in series with its contacts. The contacts are closed by sending a pulse of current through the coil, and the contacts remain closed until the current flowing through them is interrupted. What is the function of a holding contact? The purpose of the hold in contact is to provide a current path through the relay coil when you release the start button. That is why it is wired in parallel with the start. Similarly, the stop is wired in series to break the relay circuit and hence stop the motor.
dol starter,push button,self holding contactor circuit,contactor,motor control,push button switch,emergency stop button,push switch,direct online starter,momentary push button switch,star delta starter,magnetic contactor,speed controller,servo motor arduino,motor starter,contactor wiring,how to wire a self holding relay,self holding contactor,self holding contactor magnet,push button start,diy push button,push button switches,push button switch types,how to use contactor,how to use single phase contactor,self hold contactor,push button with contactor,single phase contactor,motor starter,motor control,dol starter,self holding contactor circuit,self holding contactor,self holding relay,contactors and relays,contactor,motor starters,how to wire a self holding relay,auxiliary contactor wiring,auxiliary contactor,auxiliary contact,motor,starter,motor starter,motor control,dol starter,self holding contactor circuit,self holding contactor,self holding relay,contactors and relays,contactor,motor starters,how to wire a self holding relay,auxiliary contactor wiring,auxiliary contactor,auxiliary contact,pin relay selfholding,relay.
⌚Timestamps:
00:00 - Intro
00:1 - ON OFF Push button Explain
02:24 - Diagram
02:56 - ON OFF Push button Connection
06:17 - Testing
07:37 - Self Holding Connection
09:55 -Testing
10:42 - indicator light connection
12:07 - Testing
13:21 - End
👉 PLEASE STAY CONNECT WITH US BY SUBSCRIBING OUR CHANNEL
AND DON'T FORGET TO CLICK THE BELL ICON 😊
if you like this video, please hit the Like Button.
If you found this video useful, please do Subscribe Our Channel and click the bell icon to get notified for our latest videos.
If you love this video, please do share the video
Thank You!!
ET 360