Contec 12 Channel ECG machie Printing Problem Solved | Mr Biomedical

[@alimate1025]

Great troubleshooting.. stuff..

[@MrBiomedical]

Thank you❤️ Please don’t forget to like and subscribe

[@ayyoubdaraoui7102]

nice work

[@indreshsharma5346]

Soo Good , par parts kaha se available hoga sir. Ap ke pass available hota hai kya ...pls koi parts wali company ka detail add send kare ...Thank U

[@MrBiomedical]

It depends sir. There are so many companies there. It depends on what part u need

[@drvinayakpatil]

Which ecg machine best contec 12 channel or biomedics 12 channel?

[@MrBiomedical]

Both are same

[@benjaminruiz7346]

Where you buy the motor ?

[@ikhlaqrehman77]

Sir can you tell me the rating of motor

[@rahuldeb18]

From where i want buy motot

[@mizanmdc576]

Hello. You have the solutions how to use another printer to link with Contec ECG1200G.

[@MrBiomedical]

U can use external printer. First u should change the settings in machine. Then u can connect the external printer

[@mizanmdc576]

@@MrBiomedical What type of printer can be used. I already link with HP Laser Jet Pro M203d but cannot be link.

[@MrBiomedical]

Did you changed the printer settings?

[@mizanmdc576]

@@MrBiomedical yes. You have the video how to use the external printer

[@MrBiomedical]

Unfortunately i dont have that video. But i will try to create one

[@imrankalu8182]

What to do when normal ecg shawing on screen but straight line ecg while its printed

[@MrBiomedical]

Check printer options

[@hoohkh]

Hello! Good afternoon. I’m Edwar from Mexico City, and I have a problem with an Electrocardiograph 1200G. Could you help me?. When I try to turn on the machine, the screen shows that it’s loading, but it never completes; the machine stays stuck on the loading screen. When I turn on the device, it stays stuck on the loading screen with the color bar and doesn’t proceed further. Could you tell me what the problem might be?

[@MrBiomedical]

Main board issue… check whether any corrosion or something in main board

[@hoohkh]

@@MrBiomedical Okay, I understand. And if there is no corrosion? Do you have the service manual?

[@hoohkh]

@@MrBiomedical Or what could be another problem? Because when I turn it on, the device stays on the loading screen with the color bar, as shown in your video at minute 2:26, and then it doesn't do anything.

[@MrBiomedical]

Unfortunately i dont have a service manual..

[@hoohkh]

@@MrBiomedical Any other options in case the main board is not the issue?

[@sanjivanisarwade]

Sir allenger ka monitor hai on nai hota sirf blink karke suddenly getting off.. what will be the issue

[@MrBiomedical]

[phone] pls whatsapp

[@harishbondade9983]

If time out comes in display then whats the problem in this contenc 12 channel

[@MrBiomedical]

Check settings

[@hemalatha-sl4bl]

Turning ani paduthundi yala

[@Junaid-i8v]

The machine shows no paper error sir, please help.

[@junaidaqubal5768]

Why does the machine print only 2 waveforms sometimes?

[@junaidaqubal5768]

Please help.

[@MrBiomedical]

Pls contact in whatsapp [phone]

[@old_monk_mallu09]

❤️

[@MrBiomedical]

Thank you❤️

[@old_monk_mallu09]

@@MrBiomedical it's very helpful sir. I watched every videos. Best of luck thank u for the videos

[@MrBiomedical]

@@old_monk_mallu09 Thanks for your appreciation❤️

[@prabhatkushwaha4741]

Ecg machine print out k time power of kyu Hoti hai

[@VimalKumar-zb7jx]

Sir motar mile gi

[@MrBiomedical]

Yes

[@VimalKumar-zb7jx]

@@MrBiomedical contact number send kardijiye

[@MrBiomedical]

@@VimalKumar-zb7jx 9790567867

[@francobarrazaborrego275]

Contec ecg 100g System error code 001 Help

[@pankajshukla7756]

Hame printer chahiye

[@MrBiomedical]

Yes

[@MeetSingh-on8hh]

Service password

[@pankajshukla7756]

Hi