Excellent it helped me to cut without problems Thank you very much
@chefed5105 Жыл бұрын
Great video! Have a few questions, how thick of mat can I use for cutting and Would you know how I can get the sign master software plugin to work with Corel Draw. Thanks so much
@The_AlexK_Project3 ай бұрын
Where did you get the carrier sheet? I don't see any on your website.
@kiahebron3612Ай бұрын
Can you PLEASE help I've had this machine and can NEVER get it to work? 1. when trying to cut, no matter what size mat I use it either spits it out or the mat start to shift, how can I prevent this? 2. is it recommended to use a mat or some sort of carrier sheet? 3. it will not read the registration marks, is there some sort of calabration that can be done? 4. when loading a smaller sheet (11x17). where exactlly should it be loaded? at thr far right under the control panel. far left or middle, or does it matter?
@sandaruadvertisingnattandi69483 жыл бұрын
Thanks
@fightleagueatlantic4 жыл бұрын
any chance you do any customer feedback on how to get a machine working properly?:)
@burmy15522 жыл бұрын
It seems impossible to find any information anywhere on how to calibrate these machines. Nothing on optical scanners, only laser.
@KenZCustom Жыл бұрын
Is it able to cut laminated stickers? If yes, what blade do I use and what speed and pressure? How thick of laminate is ok to use? Thanks in advance for the help
@Irrelevant554 Жыл бұрын
Yes, just adjust the force you should be good
@thrashmetalmessiah852 жыл бұрын
Hello. Great tutorial. Thanks for sharing,. My question is- i use the KI-375A die plotter/vinyl cutter. Will this also work w my machine? It came w the Sign Master software. Thanks!!!
@HeatPressNation2 жыл бұрын
If it came with your machine, then it should work. The version of SignMaster that we sell the Vinyl Systems edition, so ours only works with Vinyl Systems cutters.
@amwilliams763 жыл бұрын
Thanks so much!
@ViewFirst5 жыл бұрын
hello can we do two different force cut in one cut. like cut 40g 1st then after that 80g.
@HeatPressNation5 жыл бұрын
You can do multiple passes, but only at the same pressure.
@voltaicart69902 жыл бұрын
I've had the evo 54 inch cutter for a few week. The BIGGEST issue I have is I cannot change the measurement units . The machine reads in millimeters and I cannot change it.
@harrywiley47934 жыл бұрын
GOOD MORNING I'M A BEGINNER AND I HAVE A QUESTION ON THE KI 720 IS TH A WAY TO CREATE SHAPES OFF THE SOFTWARE
@hubertwrotny48614 жыл бұрын
Hi It is possible to set cutting of the piece of vinyl after finishing the task? Like i want to cut off 10 circles in one row, cut off all of it, and then make another 10 circles?
@shakethianapier59284 жыл бұрын
Hi, I don’t have the “include full bounds option” how do I get it to show up? Thanks...
@davidlovett8270 Жыл бұрын
Hey. I am trying to to do contour cutting with my signmater pro but I don't have the option to do automatic arms. Do you think my cutter have anything to do with that I have the vevor 870 34"
@HeatPressNation Жыл бұрын
Hi David! It may be. We recommend reaching out to your supplier for assistance.
@aljewels56404 жыл бұрын
My project is very basic I cannot get it to format . I want to know do I need additional software for creating my 30 to 40 plus logos onto a sheet to cut. I have already gotten the file Vectorized but I cannot move forward I could use some recommendation I have a new machine that I cannot use.
@En3rg3t1c Жыл бұрын
how can I remove the offset of the clipping along the contour, I have an offset to the right
@cjthe12062 жыл бұрын
QUESTION QUESTION QUESTION: I have an HP printer that can be used with heat transfers but I have a SPECIALIST Vinyl Cutter Can I still do that??? PLEASE ADVICE, THANKS.
@HeatPressNation2 жыл бұрын
Sorry, but the VinylSystems Specialist does not have contour cutting capabilities. For that, you'd need a cutter like the GCC Expert II LX (shown in this video), VinylSystems Edge, Silhouette Cameo, or similar machine. You can find these cutters and more at www.heatpressnation.com/collections/vinyl-cutters-vinyl-cutters/
@cjthe12062 жыл бұрын
@@HeatPressNation can it be any of the silhouette?
@mr.ramirez30255 жыл бұрын
its about dam time lol
@leahdobson1999 ай бұрын
Can I cut vinyl with this program and cutter?
@The_AlexK_Project3 ай бұрын
Did they ever reply to you?
@mystikhazel20554 жыл бұрын
Thank u
@romario30562 жыл бұрын
My old computer just died. I put my signmaster serial on my new one and it says that's currently being use on another computer? What should I do now?
@HeatPressNation2 жыл бұрын
For support with your Vinyl Systems machine, please reach out to our MyExpert Support Team at support.heatpressnation.com or (800)215-0894. They are available Monday - Friday, from 7:30am-3:00pm PT and will be happy to assist you.
@marcorodriguez64884 жыл бұрын
Wait How do you get color on it? Also When you put it in the printer is that Vinyl like siser weed?
@HeatPressNation4 жыл бұрын
For this video, we used a piece of regular copy paper, printed on the Canon Pixma iX6820 (forward to 2:56). But to put on a t-shirt, you'll want to use heat transfer paper. You can print on heat transfer paper with nearly any decent home/office printer. For more info on heat transfer paper, check out this video: kzbin.info/www/bejne/bYSYmmSdltqsrbc *We just updated the description to this video with links to all the products used in this video, including the printer.
@handycaballero79502 жыл бұрын
i cant get my edge to contour cut i’m doing all the correct steps as you indicate in this video step-by-step and my machine scans the first mark then go to the other ones lol in it drags like an inch past the registration market in scans to happen that goes over to the other side it’s past paper and it reads up to the third one it doesn’t go back to its original spot and it fails the detection test every time
@HeatPressNation2 жыл бұрын
Just replied to your other comment, but we wanted to comment here as well. For assistance with your VinylSystems Edge, please reach out to our MyExpert Support Team at support.heatpressnation.com or (800)215-0894. They are available Monday - Friday, from 7:30am-3:00pm PT and will be happy to assist you
@Nick-do5ki2 жыл бұрын
if you are printing on heat transfer do you need to use the carrier sheet?
@HeatPressNation2 жыл бұрын
When contour cutting paper of any kind (heat transfer paper included), we always recommend using a cutting mat or carrier sheet. This keeps the paper together while it's being cut/
@tonertrevino4 жыл бұрын
i am trying to cut but in the wizard there is on the cut view it puts a like water mark gray lines that are actually cutting into the image what do i do?
@The_AlexK_Project3 ай бұрын
Buy a different brand
@SHARPZCO2 жыл бұрын
Does this software work with Mac ?
@HeatPressNation2 жыл бұрын
No, SignMaster & SignMaster Pro will only work with Windows computers.
@SHARPZCO2 жыл бұрын
@@HeatPressNation ok forsure man thank you for the response!
@kaleyahw69173 жыл бұрын
How do I get the white paper and clear paper to print my design out what are those steps to get the logo printed out in color
@HeatPressNation3 жыл бұрын
Travis explains this at 2:52. The printing is done on a separate machine, in this case it's our Canon Pixma iX6820 inkjet printer. From SignMaster, send the traced image with contour marks to the printer. Once it's done printing on your heat transfer paper, you then bring it to your vinyl cutter for contour cutting. A carrier sheet (heat.press/multitackcarrier) or cutting mat (heat.press/cameomat1224) is important for this process. It holds the paper in place and keeps it from getting shredded during the contour cutting process.
@theinkdmoose42042 жыл бұрын
How can I get a contour cut around an entire graphic on Signmaster? My only options seems to be each individual component of the graphic, only want the outline.
@gracegraphicsdesigning63982 жыл бұрын
Thanks for ur good explanation,I love this and understood every details 🙏👏👏
@navidthenerd20273 жыл бұрын
Does every cutter machine can do such a thing? or it has to have laser and sensors and shits like that?
@HeatPressNation3 жыл бұрын
No, not every cutter can do this. You're correct - the cutter must have a laser sensor to detect the printed contour marks. The Vinyl Systems Edge & Evo cutters can do this, as well as the Silhouette and Graphtec brands of cutters. All GCC cutters with the "LX" indication can also contour cut.
@hwrida3 жыл бұрын
In the video you say carrier sheet or cutting mat. Can you use the Silhouette Cameo mat?
@HeatPressNation3 жыл бұрын
Yes, we use the Silhouette cutting mats all the time. :)
@hwrida3 жыл бұрын
@@HeatPressNation when you use the cutting mat do you change the force you might normally use without the mat? Thanks
@Cali_life6194 жыл бұрын
I have the same package i just got it in the mail. Im having trouble with the registration marks, its wont go past the 3rd registration mark. It stops reading on the fourth and it says to re start. Where can i get some help?
@HeatPressNation3 жыл бұрын
So sorry for the late reply! We provide free technical support for all of our products. If you ever have an issue in the future, please visit support.heatpressnation.com.
@Lostdesiree Жыл бұрын
hi,how to edit page marks to cutting page?i cant find this features
@nidiaambrocio58072 жыл бұрын
Can you do it with a sk-375
@wendysilva22942 жыл бұрын
Can any type of carrier sheet be used?
@HeatPressNation2 жыл бұрын
Sure, as long as it's sturdy enough to not crumple when rolled through the cutter. We really like using the Silhouette cutting mats - www.heatpressnation.com/products/silhouette-cameo-cutting-mat-12-x-24?_pos=6&_sid=ccc7e854b&_ss=r
@janeasam7863 жыл бұрын
Please do you have tutorial on easycut software... Kindly leave a link. Thank you
@HeatPressNation3 жыл бұрын
We don't have any tutorials on EasyCut software. Sorry about that.
@shabirhussain75572 жыл бұрын
Hi which version I need for liyu cutter?
@gregorysmith71434 жыл бұрын
Thankyou!!!
@patriciavogel2581 Жыл бұрын
Bonjour je voudrais savoir quel papier utiliser pour avoir un résultat comme ça avec l’imprimante
@sanaarts19603 жыл бұрын
My automatic ARMS button is disabled, what can be the reason. please advice ?
@HeatPressNation3 жыл бұрын
If you have a Vinyl Systems Specialist, this is normal. That cutter does not support ARMS or contour cutting. If you have an Edge or Evo cutter, please reach out to our Technical Support Department for assistance. They are available Monday - Friday, 7:30am - 3:00pm PT, at (800)215-0894. We offer free lifetime technical support for all of our products.
@Kleano524 жыл бұрын
"Selected Objects" is greyed out for me and there is no Include "Full Bonds" option either.
@ScaleModelAddicts4 жыл бұрын
You did not select the item you are attempting to contour cut before selecting the contour cut wizard.
@parichayagfxedits4 жыл бұрын
Hi! Can I use a normal non sticker paper to test the results as shown in the video???
@HeatPressNation4 жыл бұрын
Definitely! When testing and calibrating our contour cutting, we'll use cardstock or regular paper.
@maddgabbtv36634 жыл бұрын
HeatPressNation what kind of paper are you using
@mjones4664 жыл бұрын
is that transfer tape your using
@Kleano524 жыл бұрын
I wanted to know the same thing.
@ghowaadams29542 жыл бұрын
can you contour cut using a seiki cutter using vinyl master?
@HeatPressNation2 жыл бұрын
The version of SignMaster that we sell is only compatible with Vinyl Systems cutters.
@MikeStarzec4 жыл бұрын
how large of an image can signmaster pro print and cut/contour cut?
@HeatPressNation4 жыл бұрын
Depends on the max cutting width of the cutter. We have Vinyl Systems cutters that range in size from 24" up to 52". You'll want to keep the registration marks within the max cutting width of the cutter, so they can be read by the laser.
@torrentk14224 жыл бұрын
@@HeatPressNation Can you make a video for a large image? on paper 11x17 or 13x19
@richardthames6612 жыл бұрын
Trust me don't waste your money
@IAmLaegion3 жыл бұрын
How did you get the marks in each corner?
@HeatPressNation3 жыл бұрын
These are created by the cutting software and are sent to print with the image. If your vinyl cutter has contour cut (sometimes called print & cut) capabilities, you should have the option to add the registration marks in the included cutting software.
@victoryacademybasketball4 жыл бұрын
has this worked for anybody??? everything leading up to contour cutting has been successful. but this is bad.. maybe some steps need to be added but my scanner isnt reading anything...... PLEASE HELP
@HeatPressNation4 жыл бұрын
Please reach out to our MyExpert Support Team at support.heatpressnation.com for help and troubleshooting your Vinyl Systems cutter. A couple general tips: - Bright lights can affect the laser's ability to read the contour marks - Load the printed sheet in the exact orientation as shown in SignMaster - Print scale should be 1:1 / 100%. Anything else may cause issues with registering. - If mirroring the image, do so in SignMaster. Do not allow the printer to perform mirroring.
@bobbybouchewaterboy4 жыл бұрын
Is this the cutter from ebay
@HeatPressNation4 жыл бұрын
I don't believe so. This cutter is not currently available on eBay.
@wakimiconcepts28814 жыл бұрын
kindly show us Contour Cutting with Anycut Pro Tutorial
@vanessarincon4835 жыл бұрын
Can I use that program on specialist cutter or no
@HeatPressNation5 жыл бұрын
Yes, you definitely can. However, since the Specialist does not have an optical eye for contour cutting, that feature will not work.
@vanessarincon4835 жыл бұрын
Ok thank u we decided on the edge 28 hopefully we can order it next week excited already bought vinyl lol just need the cutter
@HeatPressNation5 жыл бұрын
Awesome! Hope you love it =)
@SNataliia685 жыл бұрын
Please help! How to make double cut per line??
@HeatPressNation5 жыл бұрын
Send to cutter -> Cutter Control Tab -> Passes Each pass is how many times it'll be cut. Set it to 2 for a double cut, 3 for triple, etc.
@marcozeferino694 жыл бұрын
In all my images he tells me that there is nothing to cut. What I can do?
@HeatPressNation4 жыл бұрын
- Make sure your image is in a vector format. Raster images will not cut. - Delete any elements that you do not want cut. Select only the vector graphic you want to send. Those are the two most common solutions. If you're still having trouble with your Vinyl Systems cutter, you can submit a request for technical support at heatpressnation.com/technical or call (800)215-0894.
@trisjafaye6534 жыл бұрын
Why won't it scan the registration marks? It just proceeds to cutting
@HeatPressNation4 жыл бұрын
You can see the machine scanning the registration marks at about 3:56-4:17.
@trisjafaye6534 жыл бұрын
@@HeatPressNation Sorry, my bad. I meant my cutter won't scan and just proceeds to cutting. I tried to follow this video, but I think I'm missing something. What could be the problem T-T
@osamaamin77484 жыл бұрын
How to remove the line appearing on the edges during printing
@HeatPressNation4 жыл бұрын
Might be an issue with the printer. Can you provide some more details?
@glennford47484 жыл бұрын
Is it a difference when using signmaster basic? Or can this only be done on signmaster pro??
@HeatPressNation4 жыл бұрын
Vectorization & Contour Cutting can only be done on SignMaster Pro. SignMaster Basic is for the Specialist vinyl cutter, which cannot contour cut. So those features are not included in the Basic version of the program.
@johnlott15075 жыл бұрын
How much for the cutter
@mr.ramirez30255 жыл бұрын
bruh go to their web site don't be one of those customers who walk in to a store and wants to know what everything cost before looking at the label
@3KHandles3 жыл бұрын
How do you detect the USB
@HeatPressNation3 жыл бұрын
This video shows how to setup and connect your Vinyl Systems Edge cutter to your computer: kzbin.info/www/bejne/qnycqZlre7mIjcU We also have videos for setting up the Specialist and Evo here on this playlist: kzbin.info/aero/PLY9aNS49KtIyNYBeKYRvDFxmV17aD6Q6X
@mobicey3 жыл бұрын
On the specialist it don’t show like this
@HeatPressNation3 жыл бұрын
The Specialist does not support contour cutting. So it will not have these features.
@mobicey3 жыл бұрын
@@HeatPressNation idk what to tell you but it does contour cut I just don’t know how to do it great. I send videos to you guys on Instagram showing ya that the specialist does contour cut. My ig is @Mob_Icey
@seasonsjohnson19484 жыл бұрын
How do you mirror the image
@HeatPressNation4 жыл бұрын
Fast forward to 3:02 to see how to mirror an object
@seasonsjohnson19484 жыл бұрын
@@HeatPressNation I missed it thank you. Ur such an awesome company
@sethriggle14623 жыл бұрын
This is so annoying. LOL it doesn't give me any of those options. Sign Master just had an update and for some reason it doesn't want to work for me
@HeatPressNation3 жыл бұрын
If you're having issues with SignMaster, please feel free to reach out to our Technical Support department at (800)215-0894.
@alrawi63163 жыл бұрын
How can I write in Arabic inside the program
@HeatPressNation3 жыл бұрын
Sorry, but SignMaster does not support Arabic text. It works in English and Chinese only.
@richardthames6612 жыл бұрын
People don't waste your money on this when you do have a problem they tell you it'll be one or two business days before we can help you but yet they want you to spend $700 on one of their machines
@HeatPressNation2 жыл бұрын
I'm sorry if you've had an issue with any of our products. We try our very best to respond to all email requests within one business day. For immediate issues, our team is available from Monday through Friday, 7:30am to 3:00pm PT at (800)215-0894 [option 3 for support]. We offer free lifetime technical support for all of our products.
@The_AlexK_Project3 ай бұрын
Looks like is the same cutter that Vevor sells. Often it's made by one company and put different brands on them.
@lynndawilson16784 жыл бұрын
What’s vector format and how do I find it?
@HeatPressNation4 жыл бұрын
Vector formats are usually .EPS, .SVG, .AI, and sometimes .PDF. These are graphics that are made up of lots of shapes. Raster images are those made up of lots of pixels - like .JPEG, .PNG, etc. Because vector graphics are made up of shapes, you can stretch them, shrink them, and they will keep their perfect definition. (If you stretch out a JPEG, it'll get all nasty and pixelated.) SignMaster Pro allows you to convert raster images (like JPEG) into vector images (like SVG).
@jimbovarnumsr84742 жыл бұрын
Good but too fast to take notes.
@hwrida2 жыл бұрын
You guys definelty need to find another program to use. There is no videos or tutorials from either you or the manufacturer and how to do anything with this software beyond basic stuff. If you go and try to find answers from the companys FB page it just shows many people over the years who have asked questions and never gotten any answers. This software seems to be a ripoff of Vinyl Master which is the closest thing to it but still different enough to not show how to do basic or more advanced things. Like, does this software offer an "Eraser" icon? Does it allow for masking?
@HeatPressNation2 жыл бұрын
We could definitely use some more tutorials for this program. Here is a playlist of all our current videos: kzbin.info/aero/PLY9aNS49KtIyNYBeKYRvDFxmV17aD6Q6X SignMaster is actually developed by the same software company that makes Vinyl Master, which is why they're both very similar.
@hwrida2 жыл бұрын
@@HeatPressNation but different enough that none of the more advanced techniques from Vinyl master work on Sign master. As for "your" videos As I stated above, real basic stuff being shown. Just enough to get someone started.
@burmy15522 жыл бұрын
I agree. The lack of resources is horrible. I'm starting to regret this purchase. They really need to put out practical videos. The manual is useless.
@torrianscott3906 Жыл бұрын
9 months later and I agree with BOTH of you guys! I’m at a halt trying to get my contour laser to detect
@MrPirata8334 жыл бұрын
This crap sucks! bought specialis 28" few months ago.. doesn't work for contour cutting .. worst $450 investment
@HeatPressNation4 жыл бұрын
So sorry you feel that way. All of our cutters have their features and specifications listed.
@johnlouiejavier8104 жыл бұрын
Is this cutter the same as cuyi?
@onettawatt38713 жыл бұрын
Hello, what type of vinyl is that?
@HeatPressNation3 жыл бұрын
This was done on plain copy paper, just to illustrate the process.
@onettawatt38713 жыл бұрын
@@HeatPressNation what’s the clear paper?
@timbervalleyhomestead2 жыл бұрын
@@onettawatt3871 looks like regular contact paper
@leonardocastillano77352 жыл бұрын
how to avoid misaligned cutting?
@HeatPressNation2 жыл бұрын
You may need to calibrate your vinyl cutter's contour cutting settings. For more information, please get in contact with our Technical Support team at heat.press/support