Control QUAD CORTEX from Logic Pro

[@wongtheripper]

You make this seemingly confusing concept so clear. Thank you

[@Ninuzzo]

Exactly what i was searching for. Thank you!!!

[@Liam_Doherty_UK]

Excellent. A really useful video. Thank you 👍😎🎸

[@Liam_Doherty_UK]

Hi, I must be doing something wrong here. I'm using Scene 2G, but the Quad Cortex keeps changing to other banks, even though I have entered 43. How can that one number (43) decided which bank you are trying to use, if it covers A-H. Should there not be a set number so it stays on say 2G for example? Thanks anyone :)

[@ElcanaldeReyesManuel]

Buen trabajo y nuevo en el canal

[@tonylimusictw]

Thank you so much this tutorial is so easy and clear ❤

[@BrianOverton-f5n]

this really saved alot of time thank you!

[@JasonGraystone]

Unfortunately I don’t think logic allows you to do a program change to the “my presets or other playlists. It’s just limited to factory presets.

[@boassegel3780]

I'm not using the factory presets. I'm not sure what you are meaning?

[@heyericafox]

I've been trying to figure this out - does Logic allow switching between different setlists? I seem to only be able to control switching between presets within one setlist (that I have to have pre-selected, or else it switches to presets within whatever setlist I start in) .. there has to be a way...

[@boassegel3780]

CC# 32 Value 0-127

[@john_sandilau]

How do I know on which channel is my QC on? Just like in your example, yours was on channel 3. How can I find that about mine?

[@boassegel3780]

@john_sandilau In midi settings on the QC, you can choose the channel you want to use.

[@Flippy2good]

Thank you so much for this!!!

[@Phil_Escipon]

Hello please, I need to do that but I don't use logic, I use studio one, does anyone have a video on how to do it? help!!

[@iszlu]

extremely helpful, thank you

[@IwanCumi]

This is very helpful! However, I still can’t connect my Quad Cortex with Logic Pro. I believe that I use the right port on each device but still, Logic Pro cannot detect Quad Cortex

[@boassegel3780]

Are you using USB? If yes, have you turned on midi over USB on the QC?

[@boassegel3780]

If you are using a midicable, then you have to select your interface for midi in Logic.

[@IwanCumi]

@@boassegel3780 thank you..! I already found the answer..

[@АлексейКузнецов-в8ц]

Thank you very much!!

[@geducam]

I used this approach, but quad cortex behaves really crazy , sometimes putting the patches in a loop. Not sure if it is logic or quadcortex. Minimized the issue when rearranged some presets that were more complex.

[@boassegel3780]

Never had that issue. Have you tried turning midi through off on the QC?

[@boassegel3780]

... and also disable midi chase in Logic.

[@fnaah_au]

THANK YOU!!!

[@wiguelharo]

Thank u a lot!!