Congratulations on your first modification tutorial!
@weerapatkiatdumrong3 жыл бұрын
Thanks for watching sir.
@christopherdenny5953 жыл бұрын
Hey we're did you buy the tir lens???
@IsraelMagalit2 жыл бұрын
I'm getting an S21B (w/519a) and plan to experiment with different lenses (and reflector). Thanks heaps for your really helpful (and inspiring) videos! Keep up the fantastic work!
@weerapatkiatdumrong2 жыл бұрын
Thanks for watching sir 😊.
@GenePavlovsky5 ай бұрын
How did it go with your S21B? I just got one and several 23.3mm TIR lens which Convoy says is suitable for S21A/S21B. However, they seem to be taller than the reflector in the light, if I put the TIR lens in, the bezel sits too high and can't be screwed into (unless I remove the glass and the o-ring from it). Do I have to send the base of the TIR lens?
@weerapatkiatdumrong5 ай бұрын
Hello sir. Remove gasket sir. Or do whatever you can to make it shorter. Sometimes I use sand paper to rub the lens to make it shorter. Thanks for watching and your support sir 😊. Please subscribe 🙏.
@GenePavlovsky5 ай бұрын
@@weerapatkiatdumrong Hi, thanks for the reply. I removed the centering ring around the LED. There are two ways I could make it fit - either remove the glass from the bezel, or the O-ring that is next to the glass (or both). Perhaps if I glue the glass to the bezel, it will be water-resistant enough? Or just put some grease between the glass and the bezel instead of the O-ring, it won't be good enough for submerging it under water, but probably will suffice for riding a bike when it's raining, what do you think? I think if I remove the glass and use the O-ring, the TIR optic itself is not waterproof, is it? It looks like it is a lens held in a white plastic holder, and they are kinda clipped together, the O-ring will only seal on the outer circumference, but the lens/holder combination will still allow water in probably? Which province in Thailand do you live? I used to live in Prachuap Khiri Khan (Pak Nam Pran, later Pran Buri) for 5 years... Gonna come visit for a month in August.
@NorthBorneoLights8 ай бұрын
Hi WK, do all the 20mm TIR lens fit in S3 easily? No modding or sanding required?
@weerapatkiatdumrong8 ай бұрын
Hello sir. Not sure sir. I can't check for you now. I am on vacation. I can check it for you maybe on this Friday. Please message me via FB sir.
@feijaohumanofrases10167 ай бұрын
hello sir, I got a S21E with a 60⁰ TIR lens and It came with that white gasket, I was thinking about getting some other TIRs To test the different types of light beams (because it's cool!), could you tell me how many millimeters these TIRs must be to fit the S21E? I don't know if the type of LED affects the fit of the gasket (I have the sst40). Would you have a link on Aliexpress for me? I I would like to buy several at once to test!
@weerapatkiatdumrong7 ай бұрын
Hello sir. Check it out! THB111.35 | Diameter 21mm TIR lens for S21E flashlight a.aliexpress.com/_oBA6tBc Thanks for watching and your support sir 😊. Please subscribe 🙏.
@lucasf1233 жыл бұрын
Do you plan to test the new tir lens for 3535 led from Convoy flashlight store?
@weerapatkiatdumrong3 жыл бұрын
Maybe I'll try it soon sir. Thanks for watching sir.
@lucasf1233 жыл бұрын
@@weerapatkiatdumrong Ok sir.
@Dave-ro5yi3 жыл бұрын
Thank you for making good videos ! I have a question You have so many 21700 flashlights but which one do you like the best as an EDC?
@weerapatkiatdumrong3 жыл бұрын
Convoy m21b sir. Thanks for watching.
@feijaohumanofrases10167 ай бұрын
hello sir, for daily and general use, which TIR lens do you usually use or would you recommend using? I currently own a 60⁰ lens, but I ordered a 45⁰, 30⁰ and 25⁰ too!
@weerapatkiatdumrong7 ай бұрын
Hello sir. About 30-45° is good sir. Combination of throw and flood. Thanks for watching and your support sir 😊. Please subscribe 🙏.
@IsraelMagalit2 жыл бұрын
Is the glass lens meant to stay in even with the TIR lens installed? Or can the TIR lens be installed by itself?
@weerapatkiatdumrong2 жыл бұрын
I still use the glass lens sir. But one of my s2+, I removed the tir lens. You can try both. You have to check the diameter of you tir. if it's big enough, you don't need the glass lens. For My s3, I still use the tir lens. Thanks for watching sir.
@IsraelMagalit2 жыл бұрын
@@weerapatkiatdumrongnoted, thanks.
@weerapatkiatdumrong2 жыл бұрын
@@IsraelMagalit You're welcome sir 😊.
@Daarreee2 жыл бұрын
I put TIR lens on the reflector and just remove the glass and that fit. Where to buy oring for s3?
@weerapatkiatdumrong2 жыл бұрын
Oh. I think you have to ask convoy flashlight store on AliExpress sir. Thanks for watching sir 😊. Please subscribe 🙏.
@gonzalez78053 жыл бұрын
Would like to have seen some beam shots before and after thanks for the video
@weerapatkiatdumrong3 жыл бұрын
I have tested it inside my house. With 10 degrees TIR lens, it is brighter than the original reflector. The original reflector is op while tir 10 degrees throws better and has brighter spot. I have already made a clip of convoy s3 with 10 degrees TIR lens. Next time I'll compare before vs after. Thanks for watching sir.
@danielinzunza21832 жыл бұрын
Hello, where i get gasket sets and tir lens for my convoy s2+ thanks
@weerapatkiatdumrong2 жыл бұрын
Please take a look at this sir. Thanks for watching sir 😊. Please subscribe 🙏. a.aliexpress.com/_mriIXfS
@danielinzunza21832 жыл бұрын
@@weerapatkiatdumrong Sorry, what size gasket do I need for convoy s2+? Can you put a link to the gasket you bought? Thank a lot
@weerapatkiatdumrong2 жыл бұрын
@@danielinzunza2183 It depends on your led size sir. If it's xml2, sst40, you need 5050 size sir. Each led has different gasket size sir. I bought it from Shopee Thailand. Thanks for your support sir 😊 🙏. shopee.co.th/product/78497897/5942279120?smtt=0.32286127-1667099978.9
@emirrhaziq65673 жыл бұрын
Which one is better? Smo reflector or 10° tir lens?
@weerapatkiatdumrong3 жыл бұрын
I think it's not much different. Smo seems a bit better. The benefits of using tir lens is low price, and it can prevent the short circuit which a normal Aaluminum reflector could cause. Thanks for watching sir.
@humambuana48233 жыл бұрын
Very good idea sir. But, Please upload the video of beamshot profil, sir.
@weerapatkiatdumrong3 жыл бұрын
I have tested it inside my house. With 10 degrees TIR lens, it is brighter than the original reflector. The original reflector is op while tir 10 degrees throws better and has brighter spot. I have already made a clip of convoy s3 with 10 degrees TIR lens. Next time I'll compare before vs after. Thanks for watching sir.
@avgrim7729 Жыл бұрын
Is flat better than bead?
@weerapatkiatdumrong Жыл бұрын
To be honest, I still don't see much difference between them sir. However, I have already tried flat 30° in my convoy h1. I like it sir. Good throw with good spill. Thanks for watching and your support sir 😊🙏.
@avgrim7729 Жыл бұрын
@@weerapatkiatdumrong Even though I didn't notice a lot of difference I like the 10⁰ and 15⁰ best. I haven't tried the flat one yet. Have you tried the stripe? What does that do?
@IsraelMagalit2 жыл бұрын
No centering gasket needed?
@weerapatkiatdumrong2 жыл бұрын
There's a gasket inside sir. I didn't remove it. Thanks for watching sir 😊🙏.
@IsraelMagalit2 жыл бұрын
@@weerapatkiatdumrong ah I didn't see it. OK.
@Moggietea3 жыл бұрын
Very useful thank you
@weerapatkiatdumrong3 жыл бұрын
You're welcome sir
@khanh20012 жыл бұрын
show me the link to buy glasses tir
@weerapatkiatdumrong2 жыл бұрын
Hello sir. In Convoy flashlight store on Aliexpress. But now it's closed due to Chinese New Year. Thanks for watching sir 😊.
@HoaLe-mp5uq2 жыл бұрын
why is there no white cone
@weerapatkiatdumrong2 жыл бұрын
White cone makes it bigger to fit in S21a or s21B sir. Thanks for watching sir 😊🙏.