COOK Stickers in CARBON FIBER mould to 120 Degrees C [PREPREG CARBON FIBRE] How To Make Carbon Fibre

[@CarbonWorkshops]

Thought I would try to lay up decals straight into the mould.. And results were amazing 😍

[@skogzor]

What happens instead if you stick the sticker to the mould?

[@CarbonWorkshops]

@@skogzor maybe work 🤷 I imagine sticking it on fresh release agent wouldn't be very tricky.

[@soimu_0731]

2:27 -> weave directions same as previous layer (still 0-90° ↑→). You'd have to cut the material with the +/-45° in mind ↘↗ (you'll maybe have more scraps leftovers ). I see that EC don't have Biaxial in prepegs...only Unis. Keep it up 👍, can't wait to upgrade to prepegs. Regarding the sticker, are you not concerned about color fading ?

[@johnmichaels4330]

What are you making in these videos? Is it a plate of some sort?

[@bradr539]

​@@johnmichaels4330Fuel tank cover..

[@911marcus]

wow, nice work 😍

[@EliseMR2]

Pls show us the KTM, I swear every video is a ktm part WE NEED TO SEE THE KTM this is very handy as I want to start a store like this in the future But need the funding lol

[@alejandroramaverdes6735]

Which is the best form to create an interior details for an Audi A5 (dors, central and front console), create moulds or cover original pieces?? I like you job and pieces a lot

[@CarbonWorkshops]

Interior pieces that have lots of clips to hold in place are often easier to cover over the part.

[@alejandroramaverdes6735]

@@CarbonWorkshops By applying a thin layer of carbon to the pieces there should be no problem with fitting in their original position, right?

[@sekaf4125]

so doe the heat activate the impregnated carbon to harden?

[@Carton-f4l]

Bro super informative video🎥 How to calculate strength

[@kohlersven-eric8006]

Are those stickers made from a heat resistant material?

[@CarbonWorkshops]

No, just standard vinyl

[@teoyota]

Why did you not just clear the mold and save the extra work?

[@CarbonWorkshops]

From experience, this won't work with prepreg carbon fibre.

[@teoyota]

But it works works fine with infusion?

[@CarbonWorkshops]

@@teoyota prepreg is different, if you stick the carbon and need to adjust it will pull the clear coat from the mould. Also I don't think it will handle 120 deg celius

[@autovmcomposites9997]

there are special in mould coatings used in the industry. But expensive and the moulds have to be 100% flawless and ultra high goss, otherwise you never would get a finish like the end result in this video

[@TrueRewire]

Why ruin the bag? Couldn't you have re-used it?

[@CarbonWorkshops]

Single use, they melt together and heat makes them brittle