Mini Wired Addressable ARGB Controller

[@acerebuilds3546]

Coolermaster: "Connect to motherboard via USB and USB header adapter". Me: "Sweet, easy as!" Coolermaster: "Doesn't include USB connector"......

[@EstelaMorenolol]

anyone know where i can get that cable?

[@lufhie2310]

Amazon

[@arietrouwborst3304]

The controller doesn't show up in my coolermaster control software. Is the usb for power only?

[@danielbrazil5699]

@@arietrouwborst3304 I downloaded the firmware from their website and it worked. www.coolermaster.com/downloads/

[@lorrainejoygamboa948]

@@lufhie2310 Can you help me get the right USB? Is this a micro usb to an adapter that will be connected to the USB 2.0 in the motherboard?

[@cubeistgames7985]

How about providing real, useful, documentation?

[@nycplayboy78]

ALL OF THIS!!!!

[@r.keditingpoint334]

How many fans we can connect to this

[@JcRabbit]

@@r.keditingpoint334 With the included splitter, 3, if you add more splitters, a max of 6. From what I was told, max output for this controller is 2A (each ARGB fan is around 0.3A at full bright white light).

[@myopicthunder]

@@JcRabbit answered my q, ty

[@rikzwambag1030]

@@JcRabbit if supported by motherboard, can u address the color of each single thing attached, or is that impossible since they're using a splitter?

[@joshkrah8257]

I wish there was a static color option my pc really needs it from this controller

[@wallyb1873]

i cant link this up to my motherboard software

[@AarenPho]

All I get is one color RGB and I can’t control speeds or anything (not too disappointed it’s cool yeah), but wish they showed the connection to the motherboard.

[@tickitsneso2903]

My CoolerMaster case has 3 pin and my motherboard has 4 pin.. Will this help to get them to work??

[@jr1092]

My ARGB Mini won't show up in software, everything is plugged in properly. Help!

[@alexj2091]

Can I use the Mini Wired Addressable ARGB Controller without an ARGB / RGB capable Mainboard? Thank you for the answer.

[@TheOnlyRB]

Sorry that no one has replied, but this controller eliminates need for rgb header as it uses USB header as shown in the video. Hopefully this comment helps other people who have the same question

[@shreyashchauhan8567]

@@TheOnlyRB thanka, it did help, can we use this controller with other brand fans?

[@gencoserpen1260]

Yes you can use it without an ARGB capable motherboard but unfortunately all lighting effects except for "single slide" cycle through the color spectrum. You are able to set a desired color only in this single slide lighting mode so if that effect is not to your liking I would pass this product.

[@eclipse9898]

My motherboard doesn't have argb header and I want to control my argb fans so should buy this?🤔🤔

[@anyone987]

Shhhhh.... Don't tell this to other one u should buy this because it can be controlled by software by using a bug! go to cooler master website and find "Master Liquid ARGB" and u find the download button and download the software Call"Master plus" and firmware. NO THX

[@cjsimpron9022]

Any one Hi. So I can use this device to connect my 3pin adressable rgb cable, connect it to usb 2.0 header and control the lights with aura sync? Im using non rgb mobo.

[@joditanoto9404]

Bro

[@patobrien5001]

if i want a static effect, what software do i use to program it? ive done everything in this video, but i cant find the right software

[@drykiwi8340]

Same

[@nickgarcia1292]

Coolermaster masterplus

[@sixx5767]

can they be controlled with a software?

[@oscar._.3251]

yes

[@NexXxus86]

No. as there is no software. Masterplus says no compatible device found.

[@virdoovideos5056]

@@NexXxus86 landing.coolermaster.com/pages/masterplus/#compatible-products where did you read it? it's compatible

[@thenidhinpr]

@@virdoovideos5056 Yet I'm still facing the same issue. Argb works with the controller but masterplus can't detect fans

[@Shsjdjdjdjdjdjdj]

@@thenidhinpr does it work now?

[@xufos69]

If I use this mini controller on 3x coolermaster mf140r fan, Can I control the fan rgb lights with masterplus software from coolermaster?

[@joditanoto9404]

Sure

[@Dejeyy]

Hi, I have a problem, my small controller is detecting, but not my fans (Mf120r) on the MasterPlus software. My motherboard is the b460m ds3h

[@eltiodelcl]

What is the mini usb connector for?

[@dylanpearce6570]

mobo's without a argb header i presume.

[@MalleaCL]

Hi, I have a h500p case, and the cooler master rgb controller with some rgb fans(air balance and flow), is compatibly with this? i can put all fans in the same color? or in "color circle mode"?

[@steevieg]

First you need to identify if your fans are noram 4-pin RGB or 3-pin ARGB (addressable). If they are normal 4-pin RGB fans, you should still be able to do some of the effects, but the fans will only show one color on each LED. ARGB can have the moving effects of the LEDs, different colors, etc.

[@RobTheSquire]

not all the led's light up and are stuck on one colour...always one blue for 2 of the 3 fans and the single SF120R ARGB has a third of leds on blue..the twin SF240R ARGB's light up partially...not sure whats going on with the argb side but at least the fan part works as i wanted...do i need to try something out on my end or do i need to return..even the mini controller that came with the SF240R's doesn't even work on changing the colour or mode. also bought and tried and failed the mini wired addressable RGB led small controller... why can't we have troubleshooting vids instead of very vague set up vids...P.S my board doesn't have any RGB headers but my GPU RTX2070 Strix has the 4 pin version which i haven't connected to but my EK-vadars work perfectly with...WHAT'S GOING ON !!!

[@juningtr7526]

ARGB Controller is compatible with MASTERFAN MF200R RGB ??? she gets several colors at once ???

[@a-hvlogs2046]

i cant figure this out to save my life..

[@thugtechgamer5308]

So since we have the option to connect it to mobo can we control the argb through mobo using USB 2.0?

[@Anandbrose]

I have the same question since my mobo doesn't have the rgb header and Can we use it with antec prizm fans?

[@mohamedmosa6326]

hi if i used the micro usb to connect it to motherboard can i control it by Asus Aura?

[@lmychajluk]

Where does it pick up the temperature? I see that the SATA connector also is the Temp, but where does that wire lead off to at :35? Can you leave the USB disconnected, and just have the controller set to 'Thermal' mode?

[@ZJ0hn97]

For me, there was a temperature header included with the MF120R x3 package box.

[@JcRabbit]

@@ZJ0hn97 Did your package include a USB cable?! Because mine didn't. I saw a video of the MasterPlus software controlling this controller (the software actually showed a picture of the small controller version on the window) so I know it's possible - or will be - to control it with MasterPlus. But not without the USB cable, AFAIK.

[@suti211]

And there is no effing way to set it to static mode with custom colors in the new versions of masterPlus, the older versions had this feature, but they are buggy as hell and crashing constantly, congratulations!

[@Muflafla]

pls make it work over usb

[@GF_design23]

I ordered Masterfan 120 HALO wich came with other controller with single button (newer version? ) ...and i have older mobo with no RGB or ARGB headers... can i use software with it and how, having no usb port on this version of newer fans?! Or should i order this (older one in video) mini controller to be able to use software? So.. i now have 1xmasterfan 140 ARGB (without controller) and 3x120 HALO ARGB with one button controller. Help. What do i need to connect them all in custom loop?

[@JcRabbit]

Don't use an ARGB splitter with it in addition to the one that comes with it, as this thing apparently cannot support more than 3 ARG fans: it looks like it has a maximum ARGB power rating of 1A, even if you connect it to a motherboard ARGB header with a 3A maximum power rating or more (the controller draws power from the SATA power cable regardless and then limits ARGB power output to 1A). Even with only 3 fans, you can run into problems if you set the fans to full on bright white: one of my 3 Cooler Master 140mm ARGB fans would have some LEDs display yellow instead of white due to insufficient power - I was forced to reduce brightness in Aura Sync. The controller is magnetic, so it will 'stick' strongly to any metal panels in the case, which is actually a very good thing. Documentation is crap (seems to be an hallmark of Cooler Master these days, even the manual of my $450 C700M case is total crap - they want to use pictures only to save on translation costs and only end up confusing everybody). Other than this, the controller is nice: it gives you some multiple cool effects, but unfortunately always seem to cycle between all colors (i.e.; you can't get an effect to always use the same static color). If you connect it to the motherboard ARGB header, at the press of a button the fans can be controlled by Aura Sync instead. And since I'm bitching, who the hell at Cooler Master thought it was a good idea to make *case* fans with ONLY *30 cm* cables?!!!! On tower cases (like my Cooler Master C700M) they're too short and won't even reach the motherboard headers (or even the case's built-in controller), forcing you to buy extensions for every single CM fan you buy! Come on, Cooler Master, *at least* 50 cm!!!! Stop trying to save pennies at our expense, not cool!

[@JcRabbit]

@xastunts I was wrong about max Amps, apparently it's 2A and not 1A, so according to someone at CM it can support up to 6 fans at full bright white light if you add an extra splitter. Cooler Master's Masterplus software is supposed to work with this small controller in the future but it currently doesn't, at least not "officially" (if you have the USB 2.0 cable connected - which you must get separately - the controller is recognized by the software but nothing happens when you apply the effects via the software). There is a firmware update floating around that apparently 'fixes' this (search the CM section in Reddit for a link) but I haven't tried it yet. You won't find this firmware update on the Downloads page for this controller at the CM web site.

[@JcRabbit]

@xastunts I was told CM is going to start including the cable soon, or has started doing so already in new units. This is a bit of a temporary mess from what I understood, as all these things seem to be currently in beta, including Masterplus itself (the software).

[@JcRabbit]

@xastunts What doesn't seem to be legit? If you want some sort of Customer Service, post on the CM section in Reddit. There are at least two *very active* CM reps there doing a really great job. Anyway, I have the Masterplus software and although I wouldn't exactly call it 'intuitive' (lol) and only works with CM stuff, in terms of actual functionality it leaves things like Asus Aura Sync in the dust. With it I can control individual LEDs in a fan (where the 'Addressable' part in ARGB comes from) now go try that with Aura lol If anything, Asus ROG *software* is the joke (their hardware, on the other hand, is great). Aura, despite being around for years, doesn't even allow you to specify different effects for different RGB zones (much less address individual LEDs) and the associated lighting service nearly maxes out a CPU core just to change LED colors. The monitor applet in Asus ROG GPU Tweak II for some strange reason hooks a DLL to all 32 bit processes and instantly crashes nearly all of them AT ONCE whenever it feels like it. Asus are completely irresponsive to user posts and suggestions in their own forums (and try simply creating an account there now that they changed their website, you will be banging your head onto concrete in no time at all lol) TL;DR: None of these companies are perfect.

[@gencoserpen1260]

@@JcRabbit After a lot of experimentation I found out you can use a single color in single slide lighting mode by pressing the led speed adjustment button (I use this on my second older computer with no ARGB headers on the MB and I can't be bothered using a USB connection as I have enough cable clutter already). Not ideal as I prefer the "breathing" effect and unfortunately in that mode the controller cycled through colors like you said which is annoying.

[@jjg42090]

Didnt talk about the only button on the controller that I actually care how it works.

[@freedexony]

whether this controller allows connection MasterFan SF120R RGB 4 pin - RGB VS MasterFan120 Halo - RGB 3 Pin ?

[@andrewwhinney7581]

with this set up is there a way of changing the effects through software? or does it have to be by pressing those buttons?

[@nomdude]

I confuse a bit about RGB port for Gigabyte Z370 HD3 ,once connect i didn't see any different before, This port use for any purpose,please advise me.

[@CheeseburgerLPs]

Can you use the Controller as a reader for a temperature sensor ?

[@ernestomontiel3982]

What do i need if i want to connect 7 Cooler Master MasterFan MF120 Halo White edition, I found a 8 to 1 argb 3 pin splitter can i use that one or i cannot connect more than 3 fans?

[@fabiovuillermoz1980]

is it compatible with Deepcool CF120/140 argb fan?

[@ninjedi6710]

do i still need the usb if im controlling via motherboard?

[@shinraorg]

No kidding, these lights reduced my rendering times by 17 Percent!, I do love them :)

[@regman6106]

CAN SOMEONE PLEASE TELL ME WHAT CABLE THEY USED TO CONNECT IT TO THE MOTHERBOARD

[@jannis01]

Nice. Will the fans be available in a set of 3 too?

[@reliancecomputerservices5320]

Is it works with 3 pin argb fans phantec 120 mm fan with the d rgb technology please suggest

[@benceszilvassy9248]

Can your pc see the argb fans in masterplus with this controller?

[@amshermansen]

This seems... a bit wasted. If you're going to do a controller that needs USB connection, why not just let people use software to control the LEDs properly instead of on controller buttons?

[@wallyb1873]

There is software but its not for this controller. still works though

[@abimanyuwddn]

@@wallyb1873 which software?

[@wallyb1873]

Abimanyu Widiadana its called master plus. Also you dont need to use the USB if your motherboard has add rgb header. You can control it through your motherboard software

[@who_bob2641]

The point of the question or this comment is. Can "Master Plus" control this device through USB, without the ADDRESSABLE RGB Header?

[@wallyb1873]

Who_Bob yes

[@hamzaEditing23]

How can i use static colours? like blue only

[@biancayee]

Do i need to connect the usb for the fan to be spinning?

[@monty-h]

nope

[@ainsleybrown2762]

Can I connect my case's ARGB connectors to this?

[@ac5737]

I have no clue how to connect the "C" component to the motherboard. my RGB header has 4 pins and this thing only has 3.

[@amineabdz]

you can connect a 3 pin header into the 4 pin Slot in the motherboard ... The only bummer is that the fan will run always at max speed

[@quebecpatriot1874]

@@amineabdz he said RGB, not power, dont make him blow his fans! (that sounded weird said out loud)

[@heretolevitateme]

You need an aRGB header, not a regular RGB header (4 pin). Fortunately you can control all your aRGBs with an Arduino if you really wanted to. All these PC specialty lighting systems are just using off the shelf components from Shenzhen.

[@joni2622]

@@amineabdz If you're talking about the fans, just switch Pwm with Dc, they will run at 50% atleast, they wont run full speed.

[@viperdemonz-jenkins]

but can it be software controlled?

[@sharkviktor]

I not have motherboard with ARGB or RGB system, but my coolers are 12v and 5v rgb, ¿I can use it anyway?

[@JaySilva88]

You can use the coolers, you can't use the lighting.

[@endlessdrive8421]

Well I can confirm that this does not work with Corsair fans....thanks for proprietary connectors! Had return my product after realizing I couldn't use it. You should be very clear that this is only compatible with your connection type.

[@sam4malaysia]

I purchased complete set in a box. Too bad micro usb is not included 😓

[@PorkyClaus]

Ok so to be clear, i have a gigabyte Aorus b450 | aorus pro wifi And i also got 3 cooler master masterfan mf120r a rgb with a wired adressible rgb led controller. and also have a MASTERFAN ARGB AND PWM HUB I can get the fans to turn on normally, but not the rgbs, in they all connect through the controller... But the power connector for the rgb is a weird black 3 connector thing (with the label gigabyte) i cant find where to put it... There is another one with a ooxo connector too but that one says ASUS, i can fit that one in a header called d_led but nothing happens and they do not turn on

[@saddamfrombd]

5v 3 pin argb fan how to setup with asus b150 pro gaming. Any converter ,?

[@EstelaMorenolol]

I've got the same problem...but with mobo tuf z390 pro gaming

[@HasimFN]

Can i use it withour connectinf to my motherboard

[@drkinetics384]

could this work with rgb strips or is it fans only?

[@glennroundy788]

I purchased the 120mm 3 pack with the controller be aware if you own a case that has Fan Filters -Fractal designs . The included mounting screws are too short why coolermaster made the decision to include Short screws instead of STANDARD length. more than likely to save money but honestly how much are you really going to save ON SCREWS. Plan The routing of the wiring very carefully the wires feel paper thin and if you do not plan the wiring route your build will look like spaghetti-- Slpppy

[@shifty8351]

How can it stay in only one color

[@metal_snake7901]

Where can i found the usb adapter

[@mauriciosene2100]

My motherboard has no rgb driver on it, does this device solve my problem?

[@catarinapaulo6693]

Hello, my motherboard doesn't have an rgb header, and I got my argb fans working using this controller :)

[@joditanoto9404]

What cable we use to connect to motherboard

[@jkw9659]

Can you use aura sync with these fans

[@redjohn2523]

I want to buy MF140R ARGB, it goes only for 1 fan without a controller. My MB doesn't support ARGB. What could you advise me?

[@bekannterunbekannter3870]

4PIN PWM Splitter?!

[@redjohn2523]

@@bekannterunbekannter3870 I mean what controller except this

[@bekannterunbekannter3870]

@@redjohn2523 ahh sorry idk :/

[@myopicthunder]

What if I want to control lights on 6 fans and only have 1 5v3pin connection?

[@abdulqaderjasim88]

Where to get it ? I've searched everywhere.

[@OsvaldoRodriguezTorres]

I have an ASUS B450F mobo and just got the Cooler Master R4-120R-203C-R1 Master Fan MF120R- 120mm 3 fans kit that include this controller and a cable to connect to the mobo that's 4-pins however Aura headers are 4-pins.... wonder how to make it work.

[@mohamedmosa6326]

did you find anyway to make it work have amost same problem

[@EstelaMorenolol]

I've got the same problem...but with mobo tuf z390 pro gaming

[@OsvaldoRodriguezTorres]

I opted to use the controller that came with my ML120RS AIO. It has the 4 pin input to connect to my MOBO however, Aura Sync and MasterPlus don't work well togther. At least at the moment I was playing with it. One thing you have to consider is to update your LED controller firmware. I don't remember where I found the instructions on how to do it :(

[@rover213]

you dont show how to connect a 3 pin rgb to a 4 pin motherboard

[@Fran_Tluanga]

Impossible. The signal pattern is never same nor the voltage.even if you can connect with adapter or splitter, it wont work. 3 pin rgb uses digital signal from mobo , but 4 pin header cannot send that digital signal, simply it increase or reduces the voltages to show different colors. But if you use a controller like in this video, theres no need of mobo anymore.. but if ur mobo has 3 pin header, then u can use this controller just for splitter function.

[@EternityGamesVids]

@@Fran_Tluanga I got the Z270-A pro motherboard. The JLED1 4 pin connector for my Cooler Master 5 Pro Rgb Case fans is empty, like there's no pins but it is labeled on the board. Since i don't have that, I decided to buy this controller. Does the USB Header thing come with thr controller?

[@rcmpbatch1978]

why no usb to 9 pin usb cable?

[@globix4778]

Does ist work with all argb devices?

[@GamingWithYoshi]

If you're having problems with the software, download MasterPlus from here: www.coolermaster.com/catalog/cases/mid-tower/mastercase-h500m/ and not the general downloads section. Also grab the A-RGB LED Small Controller Firmware. Or follow this guide: www.reddit.com/r/coolermaster/comments/arex41/argb_led_small_controller/

[@bobsort]

Firmware page is gone, is there anywhere else that I can download it?

[@Ruttigers]

Is it only compatible with Cooler Master or is it compatible with other brands?

[@catarinapaulo6693]

it is compatible with other brands. I'm using this contoller because of my ARGB Nox fans.

[@christianvela5866]

Buenas, soportara si se le conecta 7 Coolers?

[@streetdogarg]

I have MSI z270 gaming M7 and have the 4 pin strip lead but How to connect to the 3 pin connector of the ma410m

[@ZJ0hn97]

unfortunately, your motherboard does not support the argb header. argb only using 3 pin but rgb using 4pin. If you forcing them to connect will causing burn. And i hope CM support the RGB control over the usb

[@streetdogarg]

@@ZJ0hn97 SELLING THIS SHIT AND BUYING SOMETHING DECENT RIGHT NOW, THANKS FOR ADVICE.

[@dxture.3365]

Masterliquid ml240l rgb is rgb or argb

[@ph0t0dave]

I picked one of these up as I was curious and I have to say after buying and testing several ARGB controllers from the likes of Fractal Design, Bitspower, Darkside, Corsair, watercool... The CoolerMaster mini ARGB controller is the worst by a very large margin. from the unit its self that comes with 'most' cables except for the USB (which is useless anyway) to the very limited number of lighting modes are the least of any (hardly hundreds according to the marketing bullshit) that I have tried and again very limited in the so called effects them selves and oddly there is NO static mode. And if all that is not nearly bad enough, the instructions are extremely vague in the connections and step one says to go to coolermaster.com to download the software for it but the big problem with that is there is NO SOFTWARE for it. DON'T WASTE YOUR MONEY! BUY ANY OTHER CONTROLLER! This one is very misleading and complete crap!

[@ph0t0dave]

@xastunts I'm glad to help in anyway that I can. First off sorry for the long post lol but I wanted to cover your question in detail as well as throwing in a bit more information. The short answer in NO you can NOT plug RGB into ARGB or ARGB into RGB headers/connectors. Only ARGB to ARGB and RGB to RGB. If your motherboard only has 4pin RGB then you would need a 3rd party controller to use ARGB products. You and anyone else reading this, have to understand that you can NOT mix 4-PIN (Standard 12v RGB) and 3-PIN (ARGB 5v or sometimes referred to Addressable RGB 'ARGB' or Digital RGB 'D-RGB'). This is due to regular 4-PIN RGB runs on 12volts of power, where as 3-Pin ARGB runs on 5volts of power so approximately 60% LESS power than 4-PIN. Plugging in a 5v 3-PIN to a 12v 4-PIN will overload the 3-PIN and burn out your LED's to a point they will never work again. So in your case if your motherboard (would help to know what brand/model) only has a 4-PIN RGB header on it and you want to run ARGB fans, light strips, ect... then you would have to use a third party ARGB controller. I had a quick look at a random manual for a TT C32 case as you never mentioned which one so I just randomly picked one as they all look pretty similar except for the external panels, and you are best off just running any TT (Thermaltake) fans or any other TT ARGB accessories with the included TT ARGB controller. Although the quality of the TT fans I received with my TT Level 20 GT Case (Riing Plus 140mm and 200mm) have been good performers for the most part, I'm personally not a fan (no pun intended). The ones that came with my Level 20GT had great airflow and pressure along with nice and bright LED's, the software to control them was pretty good and worked as intended with a good amount of effects and options, and the LED's on the fans were quite accurate colour wise as well. The things that bother me about the TT fans are, you can not set a fan curve at all (the last time I tested anyway in early January 2019) and the fans them selves are proprietary to the TT ARGB controller so not only the the fan needs the TT controller to run but the LED's do as well. I'm sure it wouldn't be too hard to mod the cable and connect it to a 4pin PWM header if you are in a pinch but that is very inconvenient. AS I mentioned above in my first post, I have tested quite a few ARGB controllers from a few different manufacturers in the past few months to find ones that I can use for myself and my clients builds looking for adequate colour and effect options. I am/was looking for ease of use, colour options and effect options. I personally use and admittedly a bit of a fan boy of Corsair products as a whole and also their Commander Pro and LL series fans. The Corsair iCUE software, I have found to be well thought out and put together as well as very stable which is a must for my line of work. By day I am a professional technical 3D animator and a professional photographer as well, on top of building and modding PC's for the last 30 years or so lol. I also have a number if NZXT Aer ARGB (1st gen) fans as well that I genuinely like as they seem to have a higher static pressure than the Corsair LL's. But again the NZXT Cam software has issues that I'm not fond of in regards to security (it sends data back to NZXT and you don't have a choice) and stability, but that's for another story lol. With the NZXT and Corsair controllers, if either of them die, which can and has happened in the past. Then I can still use the actual fan and plug it in to a regular fan header on the motherboard or into a separate PWM fan controller/splitter as the fan power and lighting are two separate cables. That makes it more difficult as far as cable management goes but I'm happy to pay that price to have the versatility to still run the fans if the ARGB controller dies. With the new TT case i "THINK" you should be able to control the lighting via TT software but I cant find any clear info on that and it may be just a mini controller which is NOT software controlled unlike the controller included with my TT Level 20 GT. If you want other accessories to run off of it though then you would have to buy only accessories included in the Thermaltake Eco system. Like, light strips, extra fans, ARGB waterblocks, ARGB memory modules... Surprisingly I recently found out that I can control the lighting on my Corsair fans and light strips and my NZXT fans and light strips with my Aqua Computer Quadro connected to a Splitty4. NOT both brands at the same time but say all corsair on one Splitty4 and all NZXT on another Splitty4. The Aquacomputer Software has a bit of a learning curve but its been running great and stable for me for the last month with LOTS of options for colour, effects and additional sensor information like temps, water flow, fan and pump speeds and you can set fan curves based on any sensor that the Aquacomputer software has access to. And lastly has the best light effect that copies whats on your screen that I have seen yet. And finally for separate ARGB controllers, my favorites at the moment are the Bitspower ARGB controller that you can plug 8 ARGB devices in to it which is handy as you don't have to worry about splitters. Fractal Design has a new great ARGB controller that I really like and has a couple extra colours that should be standard but are rare in other controllers like orange and pink along with XSPC. The Fractal Design, XSPC and Bitspower controllers are fairly cheep along with the Aquacomputer Quadro/splitty4 coming in behind that and then NZXT and Corsair at the top. For the most part you get what you pay for so my general advice is usually buy the best that you can afford, but sometimes there are exceptions.

[@franzsonmiday6954]

Hello. I would like to get some answers. Been wondering if the corisar controller youre talking about is the commander pro. I have a triple pack of ll120 fans, It came with a ligthing node pro, can i use it as a controller with argb accesories like the masterair ma410m and control the lights on cue?

[@ebsmith1102]

So first off not universal, great another locked in platform. Second proprietary headers come on Cooler Master Third I am guessing I have to place this behind one of the enclosed case panels, which means I can't access it at need. Forth if your going to make this kind of system make it at least include a remote control.

[@endlessdrive8421]

I found out it was not universal too...there was no clear indication or notes stating it only worked with their ecosystem.

[@kongdramaa]

i can use for RGB 5v 4pin ??

[@leonardoenriquetorricomart5795]

how set a static color?

[@tom____-]

Can someone please tell me what the USB adapter is

[@Mrafizain]

Is this available for 120v

[@LightMCXx]

Purposes of micro usb ???

[@TheOldMan76]

Bit late responding but just saw this comment. The purpose of the micro USB socket is to connect to the device to perform firmware updates and to be able to talk to the device via the Master Plus software.

[@phil_matic]

Cooler Master, you guys suck for not including a Micro USB cable with the MA410m. I worked my ass off getting this cooler into my MINI ITX build just to find out that it isn't going to light up

[@carloscanizalez9917]

Cuantos abanicos es capaz de controlar ese adaptador para ARGB

[@shadmanshamsalam781]

model?

[@MrAvatarlm]

Link ?? Shopping?

[@Deathscythe666]

I always though this is no necessary

[@amshermansen]

Only on any motherboard that doesn't have an RGB header basically.

[@sasakim3792]

Prix

[@yerkaset]

Why do I neeed this

[@NLxDoDge]

Buy rgb stuff because cheaper as normal stuff -> turns off rbg, profit.

[@VaganteGames]

Lixo de acessório, pelo olho da cara!!!! Pessoal, os da aliexpress, shopee, wish são muito melhores que essa bosta, e um décimo do preço!!!

[@Markinpuff]

Oh, its ground breaking. lol

[@haydenmatkovich3699]

This video is bad and the product is even worse don't buy this product (speaking from experience)

[@danielflorea7579]

Bought this 2 months ago and i can honestly say this is the worst controller and fans setup i've ever seen, don't waste your money. -fans are loud -there's no static color - 3 pin connector wich can't go on most motherboards (4 pin) Trash controller Awful product.

[@joditanoto9404]

It only 3 pin to connect to motherboard?

[@danielflorea7579]

@@joditanoto9404 yes

[@EstelaMorenolol]

I've got the same problem...but with mobo tuf z390 pro gaming...

[@TheNehoc13]

Just release the damn software already.

[@janpul1590]

Still nothing🤣 you can get it to work with the argb controller software found in newer aio's

[@Fran_Tluanga]

Cant find anywhere this little piece of shit to buy.. need badly.

[@kenmeri5832]

Wired? No thank you.

[@CrunkKidd808]

so you want a wireless fan controller?

[@Sleether31]

Heres the link to software if that helps anybody.. www.coolermaster.com/downloads/#argb-led-controller-firmware

[@QuickenDude09]

so basically this is a tutorial on how to plug sht in. Thanks a lot for nothing

[@xplodingmojo2087]

Can the lights be controlled via the usb using masterplus?

[@NexXxus86]

no. It tells me no compatible device found.

[@lendios764]

@@NexXxus86 did you connect to the motherboard with a USB header or did you plug the USB into a USB port in ur PC?

[@NexXxus86]

@@lendios764 yes but I found the problem, I had to update the firmware.

[@Aluush]

@@NexXxus86 What firmware?

[@Aluush]

@@NexXxus86 Didn't fix my problem.. do u have anything plugged into your motherboard beside the Fans?

[@metal_snake7901]

Hi if i set a coloration by masterplus software when i restart the pc the coloration will be the same or will be different? Plz help me

[@sarunldp1311]

Is the usb wire to connect with MB included in the package?

[@CoolGaMr-de7nz]

Sarun Ladapongprasert no

[@NateBittinger]

@Zugie01 I returned my coolermaster fans because of SO many issues. Got corsair rgb fans, I've had 0 issues.

[@stephenbender8481]

How do I change the brightness?