Restoration Developer Ricoh MPC3003 MPC3503 MPC3004 MPC3504 MPC4503 MPC5503 MPC4504 MPC5504

[@skryba3733]

Świetny film. U mnie pomogło w sytuacji gdy czarny toner sypał się tworząc coś co przypominało plamy kawy lub herbaty ( proszek nie był utrwalony na tych plamach dawał się zetrzeć zostawiając po sobie szare plamy). Plamy powstawały na środku wałka. Około godziny pracy ( przygotowanie stanowiska pracy) pozwoliło zaoszczędzić ponad 750 zł netto na nowy moduł plus wymiana. Pozdrawiam.

[@MrRicoh]

Bardzo się cieszę, że film był pomocny. Warto było poświęcić trochę czasu, bo oszczędność jest duża. Tym bardziej, że problem może pojawić się też na innych kolorach. Zapraszam do subskrypcji mojego kanału.

[@williamfurtado5586]

Very good your videos, congratulations tomasz Jemioslek.

[@MrRicoh]

Thank you for your comment, it is very important to me. Best regards.

[@orozcovalencia]

Hello, what product do you use to clean the pine nuts, alcohol or just water?

[@MrRicoh]

@orozcovalencia I always use pure polypropylene alcohol.

[@orozcovalencia]

@@MrRicoh thank you so much

[@HenriMalango]

Grand merci. C'est tres bien démontré

[@MrRicoh]

@HenriMalango Je suis content d'avoir pu vous aider. N'oubliez pas de vous abonner à ma chaîne. Salutations.

[@MrRicoh]

@HenriMalango Don't forget to subscribe to my channel. Best regards.

[@mandimohammedjaweed6158]

Thank you sir this video moor help full all peoples

[@MrRicoh]

Thank You. KZbin SUPPORT: kzbin.info/door/OHtXTtGHj33pUm8Gf2FH3Ajoin PATREON: www.patreon.com/CopyExpertMovieStudio PATRONITE: www.patronite.pl/1796

[@renecandela6503]

Excelente video 😃👌 esto también se le hace alos otro colores gracias 👍👍👍

[@MrRicoh]

Sí, tiene usted razón. Puede utilizar este procedimiento para cian, magenta y amarillo. Veo que tienes conocimientos técnicos. Me alegro. Saludos. Si encuentra nuestros videos útiles y útiles, por favor done a nuestro canal: 🔥🔥 Membresías del canal - KZbin: kzbin.info/door/OHtXTtGHj33pUm8Gf2FH3Ajoin 😁😆 PATRÓN: www.patreon.com/CopyExpertMovieStudio 🔥💥 PATRONITO: www.patronite.pl/1796

[@callemster]

I am watching videos from long time

[@MrRicoh]

Thank you for your comment, it is very important to me. Best regards.

[@callemster]

@@MrRicoh Your videos always support me for trouble shoot

[@MICHELANDRES]

Hola Tomasz, A mi me faltan los seguros plasticos que contienen a los engranajes (8:42) Puede ser que la unidad no funcione correctamente por no tener esas piezas?. Y de ser asi, puedo sustituirlos con algun seguro metalico como el primero que se coloca en el engrane blanco? Y me podrias decir como se llaman esos seguros plasticos? Por favor. Muchas gracias.

[@MrRicoh]

Hola, se puede poner en versión de metal o de plástico, da igual. Solo recuerda que si usas la versión de metal, ¡el cierre no debe estar magnetizado! Un imán es malo para los rodillos magnéticos. Es un asunto menor, pero importa. No olvides suscribirte a mi canal.

[@crocke100]

Great ,very informative video.What is this liquid that you use to clean the gears ?

[@MrRicoh]

Thank you. It is a liquid for lightening e.g. hair

[@SuperFcbarcelon]

Merci beaucoup 👍🇲🇦 Ricoh maroc

[@MrRicoh]

Thank you for your comment, it is very important to me. Best regards.

[@obitoobito3241]

What is the appropriate weight developer inside unit

[@MrRicoh]

Hi, This is a good question. Fortunately, we already have developers replacements in the online store and we know what the weight is. Each color is 380gr. Look: 1. Developer do Ricoh MPC3003 MPC3503 MPC3004 MPC3504 MPC4503 MPC5503 MPC6003 MPC4504 MPC5504 MPC6004 cyan Developer (OEM) 380g - PRODUKT KOMPATYBILNY D182-41246 copy-expert.pl/produkt.php?iden=242427 2. Developer do Ricoh MPC3003 MPC3503 MPC3004 MPC3504 MPC4503 MPC5503 MPC6003 MPC4504 MPC5504 MPC6004 black Developer (OEM) 380g - PRODUKT KOMPATYBILNY 193F-81998 copy-expert.pl/produkt.php?iden=242426 3. Developer do Ricoh MPC3003 MPC3503 MPC3004 MPC3504 MPC4503 MPC5503 MPC6003 MPC4504 MPC5504 MPC6004 magenta Developer (OEM) 380g - PRODUKT KOMPATYBILNY 1EB2-60569 copy-expert.pl/produkt.php?iden=242428 4. Developer do Ricoh MPC3003 MPC3503 MPC3004 MPC3504 MPC4503 MPC5503 MPC6003 MPC4504 MPC5504 MPC6004 yellow Developer (OEM) 380g - PRODUKT KOMPATYBILNY 419A-43318 copy-expert.pl/produkt.php?iden=242429

[@obitoobito3241]

@@MrRicoh mpc2003 same weight

[@MrRicoh]

380g

[@siriotec3752]

hi, if the developer are exhausted or in over-toner, need you have to change it with a new one

[@MrRicoh]

Yes, most often it is

[@kennyloh9013]

Very good your video ... may I know you using what water to Clear toner on the gear ? Thank you

[@MrRicoh]

Thank you for your comment. Hope you will be my subscriber. I use polypropyl alcohol to clean the gears.

[@kennyloh9013]

@@MrRicoh what is the brand name your using this alcohol? Thank for you information

[@XJHOMESTUDIO]

Very good video, thank you for helping me fix the copier.

[@MrRicoh]

Thank you and best regards

[@quangviet7263]

Kênh của bạn rất tốt

[@callemster]

Just now i also Started repair Ricoh color machines its will be thanks full

[@MrRicoh]

best regards and have a nice day

[@baselmokhtar44]

Do wear a mask and gloves ?? Cause iam afraid it has some risk concerns

[@raulmandatori2983]

The unidad RICOH SPC 840 it's the same MPC 3003? 3004?

[@MrRicoh]

Most of the elements are the same because they are twin machines, only one does not have a scanner.

[@myatkhing4533]

Please tell How do you clean gears?

[@MrRicoh]

I use a gel for washing plastics.

[@dahmanus2002]

i prefer to clean the developer with a CPU fan to blow away the impurities and throw it in an induction bobine to reactivate it, then i restaure it to the development unit, this is my method if i don't find developer.

[@MrRicoh]

Your method is fine, but at the client's office, you need to do it with a vacuum cleaner.

[@leonardomartinez5801]

how do i calibrate the revelator once a put in the unit, in the service mode

[@MrRicoh]

I recently added a video with this procedure, it is available on the channel

[@marcusquah5731]

Hi ricoh mpc 305 developer unit have video?

[@MrRicoh]

I only have a movie like in mpc305 I replace the drum, but how to spill the developer, you can see in this movie where we write these comments. DRUM MPC305: kzbin.info/www/bejne/fqWyqqOln9VsncU Don't forget to subscribe to my channel.

[@danielit2033]

Jakiej chemi Pan używa do czyszczenia zębatek ?

[@MrRicoh]

W tym przypadku produkt firmy Deflin Polska marka a jest to płyn do usuwania graffiti

[@copisterialasalle772]

Hi, I have done the same, I have put new developer but before the copy comes out very very clear, I have changed the value in SP3701-003 to initialize developer, and I have also fed toner for three times in sp3 050 003 but it still prints very clear, I can't see the video to initialize, could you show a link? What can I do? my machine is ricoh mp c3003. Thanks!!

[@MrRicoh]

You've done everything you need to do. Maybe the problem is elsewhere

[@doanquangtien7591]

Thanks you very much!

[@MrRicoh]

Mam nadzieję że film ci pomógł. Pozdrawiam

[@laemchabanggift6423]

Hi Sir, how can we know the current developer was expired (any defect shown for observe)? And when we need to completely replace developer. Thank you so much...

[@MrRicoh]

The developer is a consumable that is replaced according to the counter. The service technician must always enter in the service book the date when the developer replaced it. If you don't have this information then the developer will replace it preemptively. Just like timing in a car.

[@radhakrishnastationery1296]

hello sir , i have ricoh mp2001l xeox machine , iam facing an error code sc520 in the xerox machine , before the error code flashed , i experienced a noise in the xerox machine , which was loud enough as a bomb, plz help me out to solve this issue....

[@MrRicoh]

Your engine is blocked. Something is stopping the drive, maybe a badly assembled fuser unit.

[@jean-claudembeng6720]

Well done Do you sell Ricoh parts? I need drum units for Ricoh Aficio MP C3001

[@MrRicoh]

Thank you. This is how we sell parts for all Ricoh copiers, more details [e-mail]

[@mandimohammedjaweed6158]

Hi sir Ricoh mpc 401 MECHIN DRUM UNIT I CLEEN SIR BUT EVERRY TIME LIGHT COPY COMING SIR PLZ TEEL ME SIR (I FORCE TONER EXECUTE GIVEN TIME ONLEY THAT TIME GOOD COPEY COMING AFTER SOME TIME LATTER AGAIN SAME LIGHT COMING SIR Y SIR )

[@MrRicoh]

A dot is a symptom of a damaged drum or roller in the fusing unit. Take out the drum unit and go around carefully and check the OPC DRUM if there is a dot. Do the same for the Fuser Unit. KZbin SUPPORT: kzbin.info/door/OHtXTtGHj33pUm8Gf2FH3Ajoin PATREON: www.patreon.com/CopyExpertMovieStudio PATRONITE: www.patronite.pl/1796

[@Krishna-vv2rc]

Hello sir, RICOH MPC4503 came out sc240-01, may I know what the problem??

[@MrRicoh]

Replace the LD unit Replace the harness Replace the IPU board

[@Krishna-vv2rc]

@@MrRicoh thank you sir...

[@anhtan1989]

Please help me, i need firmware mpc 4503

[@MrRicoh]

@anhtan1989 I don't have it, but I'll ask my friend to give it to me. I will contact you soon.

[@anhtan1989]

I'm repair done, thank you

[@MrRicoh]

@anhtan1989 That's very good news. I couldn't reply to you earlier because I was howling on vacation.

[@anhtan1989]

@@MrRicoh 🥰

[@MrRicoh]

@anhtan1989 Greetings from Europe.

[@photocopysunmita]

THANKS

[@MrRicoh]

Thank you for your comment and best regards.

[@sadikshikalgar1747]

kyocera taskalfa 3212i Developing unit cleaning videos.

[@MrRicoh]

I will remember about this.

[@mandimohammedjaweed6158]

Thank you sir this video moor help full all peoples

[@MrRicoh]

Thank you for your comment and best regards. KZbin SUPPORT: kzbin.info/door/OHtXTtGHj33pUm8Gf2FH3Ajoin PATREON: www.patreon.com/CopyExpertMovieStudio PATRONITE: www.patronite.pl/1796