Corona C4SF-H receiver binding process for Futaba T3PV and T4PM / 4PX

[@JPTulo]

Can’t beat the price on these!! Finally I can look into converting my bashing fleet from the crappy RTR radios to my nice Futaba setup I use for racing.

[@aaronshobbygarage2338]

Couldn’t agree more www.ebay.com/itm/126207776101?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=aXCFt0qITFq&sssrc=2051273&ssuid=aXCFt0qITFq&var=&widget_ver=artemis&media=COPY

[@JPTulo]

@@aaronshobbygarage2338 I paid even less recently. $20each shipped through Amazon Prime, I got 4 for what I normally would have paid for 1 Futaba receiver. 🤯

[@cramalnig]

Thanks for the video! I have recently bought a FUTABA 4GRS Tx, and a few of the Corona C4SF receivers. They seem to be having trouble being remembered by the Tx, I've set the Tx to S-FHSS Normal, they'll bind, but if not used for a period of time, or days / weeks etc, they need re-binding, however it now seems to be each use, which is now annoying... surely this isn't right? Any clues? There's some other setting I'm to use on the transmitter is there? Thanks!

[@aaronshobbygarage2338]

Although I’m not familiar with the 4grs the function should be the same. You should not have to rebind unless you change channels on your radio. Sorry I don’t have any helpful hints to try. If you have a futaba 204gf try using that and see what happens because they are basically the same receivers.

[@cramalnig]

@aaronshobbygarage2338 thanks for the reply! Yes it's an odd one.. I went through them again today. The two genuine FUTABA r304sb are ok, but the DasMikro and Corona can only be used two or three times and then it's re-bind time! Sometimes even just once.. I tried them all again today. The Das' wireless Rx's are T-FHSS as you know and the Corona are S-FHSS, different bind methods too. I've just ordered a pair of Futaba Rx's, I really begrudge paying £50 each for something which costs only pennies to manufacture, but hey ho I think it's looking that way. On the Das' and Corona packets they say they're compatible with the 4GRS Tx. Finger's crossed they eventually work and remain attached to the Tx.

[@crackup007]

Hi friend, how good are those Corona receivers compatible with Futaba FASST? 👋

[@aaronshobbygarage2338]

I have been running these receivers for years without issue. Range and binding is the same. I’ve sold many on my eBay store and only had one come back. 💯 save some money that said the FASST receivers are hard to find now due to materials shortage issues.

[@rcrockcrawler]

Thank you 👍

[@aaronshobbygarage2338]

Your welcome!

[@momiamomiage556]

ありがとうございます。

[@twinturbotony93]

What do you think of the quality of these compared to a futaba rx? I have all my nitros on genuine futaba rx. I have some orange rx on electrics only cause I don't trust them on my nitros.

[@aaronshobbygarage2338]

I’m happy with them. Unless you want telemetry or the model specific feature of the 304sb this works just as well at the 203 and 204gf receivers.

[@twinturbotony93]

@@aaronshobbygarage2338 ok thanks. I'll stick with futaba for my nitros just so I can use the telemetry on my 4px. Wish somebody would make telemetry sensors that are more affordable for futaba.

[@aaronshobbygarage2338]

@@twinturbotony93 just to clarify this receiver does have sbus but doesn’t read the receiver pack voltage like the 304 👍

[@fabricioaraujo6783]

how to use 4 channel futaba 3pv

[@aaronshobbygarage2338]

T3pv?

[@fabricioaraujo6783]

Futaba model 3pv

[@aaronshobbygarage2338]

⁠they appear to be the same. Should be the same process as the t3pv but if not the “3pv” is not one I have had before. Process should still be the same.

[@user-zs4iv3vf5m]

I am using 3pks , do you think the C4SF-H would be compatible with this model?

[@aaronshobbygarage2338]

I was unable to find the protocol for that transmitter. If FASST you need the C4FA receiver. The c4sf is for sfhss. Hope this helps.

[@user-zs4iv3vf5m]

@@aaronshobbygarage2338 Sure, You give me the helpful info for the receiver. thanks for your great help and nice reply

[@aaronshobbygarage2338]

@@user-zs4iv3vf5m www.ebay.com/itm/125520638724?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=aXCFt0qITFq&sssrc=2051273&ssuid=aXCFt0qITFq&var=&widget_ver=artemis&media=COPY Here is the link to my eBay store. Ty!

[@user-zs4iv3vf5m]

@@aaronshobbygarage2338 is great help, much appreciated

[@Filmoreju]

Will these work with the Futaba T3PL and T3PRKA systems??? Thank you!

[@aaronshobbygarage2338]

Those appear to be a different protocol and I would bet they will not work.

[@kh40yr]

These will work on a 3PK with Fasst 2.4 module already installed?

[@aaronshobbygarage2338]

For models with FASST you’re going to want the following www.ebay.com/itm/125520638724?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=aXCFt0qITFq&sssrc=2051273&ssuid=aXCFt0qITFq&var=&widget_ver=artemis&media=COPY

[@robertsteuer1442]

Any idea how much it weighs WITHOUT the plastic case? Would like to use in a micro glider

[@aaronshobbygarage2338]

I’m sorry I’m not sure and don’t have a scale that will read something that small.

[@JPTulo]

@@aaronshobbygarage2338Only drug dealers or jewelers have scales like that. Thanks for the great video! 💪

[@aaronshobbygarage2338]

@@JPTuloand people who sell stuff online 😉