Corsa C Brake Light Switch Fitting

Tips on how to replace or fit a brake light switch on a Corsa C (Our model was year 2000 to 2001 on X plate).
Bought on Ebay for under £12:00 www.ebay.co.uk...

[@huttenclub]

Thank you for this video. I didn't know how to adjust this switch after having the brake booster and master cylinder off after re-sealing my car.

[@nevmalik1]

You are welcome!

[@Music4Passion145]

Thanks buddy, you saved my ass today

[@johncollins8304]

Thanks.I finagelled the connector off, snapped a coupla fit plastic flanges off 'this'll side, levered the red thing down with the motor running so the pedal would go down more, tried twisting it (as in some vids) tried pulling with a large two 90° pick, grabbing with adjustable wrench ready to smash it just to get it off. No go. I broke my back prank g back over the cill. And according to this vido, even if I do crush it off, there is worse to come. '

[@ibrahimrt27]

Thank you

[@nickfish3820]

I checked everything. I changed and this but I haven't got brake lights.any advise?thank u in advance.

[@simoneaderucci3242]

Where can i found this sensor on my Opel Corsa c 1.3?

[@asianintruder]

How do you remove the white locking collar which the switch sit behind thanks

[@nevmalik1]

If removing then just destroy it, care needed only on refit

[@EdgyNumber1]

Ffs, what is it with these cars??? Simple jobs just require you to do crazy stuff to get to the main job. I've just done my flasher relay and they can't put it in the fuse box like every other manufacturer. You've got to remove the battery (a task in itself) just to get to the BCM and open that up. Re-seal the brake booster against the bulkhead? Yep, all the trim and windscreen wipers needs to come out. Change the air filter? The whole airbox has to come out and unbolt from the MAF sensor body. Crazy s××t.

[@anythingwithwheels6585]

Why did u change it

[@nevmalik1]

Brake light was stuck on all the time