Thanks GM for such a shitty part ... Advise for those c6 owners that don't have this plug already...go online but go right now and order this cause God willing this can happen anytime and is uncomfortable as hell
@chrisgerritsen23762 жыл бұрын
I installed this device yesterday and worked excellent. Finicky to get electrical plugs released and patience is required. I began with getting the steering column unlocked and after a minute of messing with this until it unlocked I then removed the ground cable off the battery post. No annoying chirps or bells going off, I had it done in an hour. Thanks for the post!
@mr.joints5142 Жыл бұрын
Did exactly what he said and it worked! The battery does die so be prepared to charge it after! I got scared when my car didn’t turn on after installing the column bypass
@williamletman94748 ай бұрын
How do you reset it
@deankevin963 жыл бұрын
So you had the same issue as me? I installed one on eBay back in April of this year, it worked... but today the message popped back up again and I had to disconnect the battery to get it To start. I’m assuming I’ll have to install another one? Which isn’t an issue but I will admit it was a pain in the ass...
@carlosreyna968911 ай бұрын
I forgot to put it accessory.how do I get it unlocked to start over
@CliffsHowTo11 ай бұрын
You have to take the unit out, plug back into the column lock, have the car unlock it, then plug the unit back in.
@kevlouis74453 жыл бұрын
Does this work on a 2000 Cliff? I got the LMC5 to install in passenger footwell .
@CliffsHowTo3 жыл бұрын
I know the 2000 corvettes had a similar issue. However, it is a different bypass module, and may plug in, in a different location. I’m not too familiar with the C5 corvettes.
@panzerwaffen28733 жыл бұрын
Search for your vette year there are for c5 and c6
@ismaelsalinas7693 Жыл бұрын
I installed my bypass device last night, but after attempting going for a ride, my steering wheel is locked. Did you have this problem after installing the bypass device?
@CliffsHowTo Жыл бұрын
I didn’t, but it sounds like the column lock was in the “locked position” when you installed the bypass. You have to turn the car on to unlock the wheel, before unplugging the column lock. Otherwise it’s stuck in the locked position.
@GoalRGood Жыл бұрын
Great video, thanks for sharing. Did replacing the calm lock bypass module solve the problem? Where did you buy the column lock bypass? Could you please share that link? Thank you so much.
@CliffsHowTo Жыл бұрын
It did. I don’t remember where I bought it. I think I got it on eBay.
@bmann7925 жыл бұрын
Ok thanks. I just did mine and the code came up but I cleared it on DIC and hasn’t come on since. Mine was from corvette world Houston and seems great
@bmann7927 ай бұрын
Can these go bad?
@CliffsHowTo7 ай бұрын
Absolutely!
@bmann7925 жыл бұрын
Why are you changing it?
@CliffsHowTo5 жыл бұрын
It was giving me the same error codes again, so I swapped it out.
@PGeorge613 жыл бұрын
Hey...Im doing mine today. Got the bypass off ebay. Just curious, how long did your first replacement last? And how is the 2nd one doing? Certain company making a better bypass? Thanks for the post btw...
@CliffsHowTo3 жыл бұрын
Looks like I uploaded this video about 3 years ago. I’ve had the car 11 years, and put the first unit in it not long after I got it. So the first unit was in there roughly 7-ish years. The second one is doing fine so far.
@PGeorge613 жыл бұрын
@@CliffsHowTo Cool. Thanks for the reply, man!
@enthused75915 жыл бұрын
Hey dude, quick question. I have an 05 as well, and the column lock is getting stuck on 90+ degree days. I looked it up, and isn't there an open recall on all '05-'06 manual trans cars that have the telescoping steering wheel? Gonna call tomorrow, but wondering if you've heard of that. I guess the locking mechanism is supposed to be removed and fixed for free by a dealer.
@CliffsHowTo5 жыл бұрын
I’ve never heard of that. But I say just install a bypass module. Or if the dealer will fix it for free, have them do it.
@True_Knight5 жыл бұрын
Hey brother, I am just looking into this now, but there was a TSB that came out late 2018. The dealer will fix the problem permanently but it’s not covered under any type of warrantee so it will cost you. I am going to try to have them just glad the computer because the column lock in mine doesn’t ever lock. www.corvetteforum.com/forums/c6-corvette-general-discussion/4221025-permanent-2005-column-lock-resolution-from-gm.html
@nbtextremes3 жыл бұрын
Great video man !
@fabian42134 жыл бұрын
Why and how often do you have to replace the override module?
@CliffsHowTo4 жыл бұрын
I replaced mine because I was having starting issues. The old one probably still works.
@jt39783 жыл бұрын
Great video! Was able do install mine and replace the ignition start/stop switch in about 1 hour.
@deankevin963 жыл бұрын
Which brand did you get? I installed one that had good reviews from eBay back in April 2020.... here we are, December 13th and the message popped back up 🤦🏽♂️
@jt39783 жыл бұрын
@@deankevin96 found it on EBay for about $62. Listing description shows KC designs. Plug and play install once getting past the hard plastic clips mentioned in the video.
@niner4life793 жыл бұрын
What happens if you connect the by pass module and the accessory mode is not on ? I replaced the bypass module with a new one but still getting the column lock message
@CliffsHowTo3 жыл бұрын
I’m not sure. I made sure to do it according to the instructions. I would go back and do it correctly.
@haynboy87 жыл бұрын
Which one did you buy and where did you get the old one from?
@CliffsHowTo7 жыл бұрын
+haynboy8 both on eBay, and I think they were both west coast corvette. Not 100% on brand though.
@luckyvet6 жыл бұрын
Quick question Cliff, I've ordered the lock bypass but the steering is currently locked. I have no idea how to 'unlock it.' Any idea if the steering will unlock when the bypass is installed? Many Thanks!
@CliffsHowTo6 жыл бұрын
It must be unlocked to install!
@CliffsHowTo6 жыл бұрын
It must be unlocked to install!
@CliffsHowTo6 жыл бұрын
If it’s stuck in the locked position, I am not sure how to get it to unlock. Try looking on the corvetteforum.com, to digitalcorvettes.com. Lots of good info there!
@CliffsHowTo6 жыл бұрын
And good luck!
@luckyvet6 жыл бұрын
Thanks man! Will do. Peace
@darrelswanson38194 жыл бұрын
Does this only works for the c6 or does it also works for the c5 ?? bcuz imma c5 owner and I’m having the column lock issue is well