Cosco Shifter 300-Pound Capacity Multi-Position Folding Hand Truck and Cart Wheel modification

[@doncastillo9257]

One of my little caster wheels got a flat spot on it after the cart was used on a heavy load and dragged through a gravel parking lot. Thanks for this simple yet informative video. Off to Home Depot it is!

[@ronmendoza1274]

Thanks for the wheel upgrade. I recently found this Cosco Cart abandoned in my parking lot. The swivel wheels are a bit noisy and loose.

[@donzhu4996]

Finally, I find this video to modify the wheels. Really appreciate it.

[@SSTrueLoveMarinus]

Just got back from Home Depot. Thanks to you, I changed out the wheels real easy. Can't thank you enough. So smooth now. I love this hand truck. I gave you a thumbs up! 👍👍👍

[@billykennedy7973]

I bought this hand truck for work and now the wheels are getting loose. For the life of me I couldn't figure them out. Thank you for opening my eyes.

[@minhajchoudhury1886]

I've been trying to figure this out for 3 years. Thanks!

[@UnknownExcalibur7]

Hello! i found this video years later and this helps out with the little cart dolly. Thank you I wonder if you'll be able to show on a big cosco dolly

[@denzelvietnguyen3816]

Hi Ken. Appreciate this video much. Thanks to it that I know how to change the small wheel. How about the big wheel in case we would like to move it? Pls advise.

[@360principe]

Drill the rivet out from the back to release the rear wheel. 55mm or 60 mm axel bolts www.metrikx.ca/scooters/hardware/bolts-axle/metrikx-scooter-bolt-axle-black-all-sizes/ 120mm x 25mm wheel, if you use scooter wheels you'll need spacers to fill the gap so the wheel doesn't move side to side. Scooter wheels www.google.com/amp/s/www.metrikx.ca/amp/categories/scooters/wheels/120mm.html Spacers www.skatepro.ca/en/283-37374.htm

[@fireite605]

Thanks just did the mod today!

[@SSTrueLoveMarinus]

Thanks so much!

[@Kthpnd11]

Nice!

[@ivanol6399]

I have the same dolly as well, but I wonder if you have changed the other wheels (bigger or back wheels) Mine are broken and I need to remplace these ...I’ll appreciate. Thanks

[@360principe]

Sorry for the late reply. Youll have to google wheel axle bolts. www.metrikx.ca/scooters/hardware/bolts-axle/metrikx-scooter-bolt-axle-black-all-sizes/ Pick 55mm or 60mm. Then Google razor replacement wheels you can use 100mm to 125mm. www.amazon.ca/Razor-Scooter-Replacement-Wheels-Bearings/dp/B000FNNZJK/ref=asc_df_B000FNNZJK/?tag=googlemobshop-20&linkCode=df0&hvadid=292942613933&hvpos=1o1&hvnetw=g&hvrand=11956695079009653374&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9001543&hvtargid=pla-432491431110&psc=1 Just find whatever is cheapest. You may have to drill the plastic for the bolts to fit. You'll have bearings in the rear wheel for silky smoothness. I'll make a video later when my rear wheels fail. Goodluck.

[@ZillaYT]

Those are channel locks, not wrenches. Good vid otherwise.