NEW PRODUCT ALERT | How To Make Wax Melts With Our New Soyaluna Pillar Wax

[@Ash_Ann296]

Hi, I’m just wondering what you can use to heat the moulds if you don’t have a heat gun. Thank you ❤

[@chedeeh4141]

Hi, may I know do you turn off your heat when you blend your FO and color dye? And what temperature you add your FO? Is it below 93.3?

[@CosyOwl]

Hi, we keep the wax on a low heat and make sure the temperature is correct for adding each ingredient. For this Peony petals fragrance oil we added it to the wax below the temperature of 93.3. Each fragrance oil will have a different flash point temperature in which it will evaporate from the wax. You will need to add the oil below this temperature. You can find the individual fragrance oil flash points on our website under each product. Hope this helps!

[@ShayEmme]

Great video can’t wait to purchase, with wax melt and pillar candles is it a must that you wait 24 hours before releasing them or is that just a desired time?

[@CosyOwl]

As long as your wax melts have hardened and set then it is fine to unmould them before. We say to leave them at least 24 hours so they become hard enough to melt on a wax melt burner. For an even better scent throw experience we recommend leaving them to cure for 10-14 days. Hope this helps :)

[@cupcakemum12]

Hi. Can you tell me where I’m going wrong.? I made some normal candles and some gel candles, in some I used the wooden wicks but when I light them, especially with the gel wax it goes out pretty much straight away. Please help X

[@CosyOwl]

A specialised wick is required for gel wax but is not something that we sell im afraid. For the normal candles you have made, you may need a slightly larger wick if the flame is extinguishing or drowning.

[@cupcakemum12]

@@CosyOwl Thank you. I’ve made quite a few candles but unfortunately I’m not selling them. Nobody wants me lol. Your videos are great 👍