Pulling the anvil out of the Bandit chipper & new knives and bolts 💪🏻💪🏻💪🏻

Рет қаралды 11,085

Күн бұрын

Пікірлер: 39

@warrenjohnknight.9831 2 жыл бұрын

For the 12 year's that operated a sawmill chipper, every shift i would replace the knifes the most important thing was my own padlock to lockout the contract panel as absolutely no other thoughts is someone starting the chipper as I was inside the chipper.

@stephenkeefer3436 2 жыл бұрын

Cordless tools sure are a game changer. Good video Tim .

@gcrauwels941 10 ай бұрын

I'm about to do this to a customer's older model 250 after repairing the Cummins 4BTA on it. Appreciate this.

@marksparkplug7758 2 жыл бұрын

Thanks CT3, good job. I'm retired but have 40 years of running rubber hog very similar to your wood chipper we had 2 anvil knives and 12 drum knives we set The gaps at 20 thousands and after a run time of 1 hour of grinding we would open back up and check gap and torque, our anvil or stationary knives would be flipped once a year. We used to send knives out to sharpening but it was cheaper to buy new, that's probably not the case now with what's going on.

@bodenma 2 жыл бұрын

My Vermeer Chipper manual had spec for anvil edge wear. You want clearance between knife and anvil anyway. The chipper is not a set is scissors making a precision cut.

@mattyc195 2 жыл бұрын

Cool video and thanks for sharing.

@stephenkeefer3436 2 жыл бұрын

I’d put a quick spray of cold galvanizing spray under that anvil base. Rust ain’t ever your friend.

@patriotarborist711 Жыл бұрын

it is high quality steel and will not have anything other than surface rust for longer than any chipper will ever last

@pauliossi2674 2 жыл бұрын

you can't get the knives and anvil and their mounting surfaces too clean use a wire wheel and /or a scotch brite wheel to clean things up. NO dirt or paint. If its dirty the pieces will not tighten up right. The saying is if it's not tight it will move, once it moves it will self-destruct.

@troytreeguy 2 жыл бұрын

Oh and check each knives clearance usually ones off and you want the clearance on the closest knife.

@rickhamm3962 2 жыл бұрын

Was just wondering if the size of the chips change if your knifes get dull?

@cotontop3 2 жыл бұрын

Yes. If any part of the anvil or knives wear, the chip size changes quite a bit.

@josephboley 2 жыл бұрын

Good morning bud 👍✌️

@billharris3335 2 жыл бұрын

What happened to the logs from that big pine? That should have made great lumber

@cotontop3 2 жыл бұрын

Property owner has them.

@johnnyfair 2 жыл бұрын

Most sawmills dont want yard trees….to much chance that they will have metal in them.

@charleslowe4589 2 жыл бұрын

Wish it were that sunny here in ians path, sticker done pecked in the mud down here, lol

@patkelly7999 2 жыл бұрын

Good stuff Tim, You are looking after Miss Piggy real well, would not like to make her angry though, she would show no mercy👌👍🙂

@charleslowe4589 2 жыл бұрын

Those 6.2 fords are fairly decent but get goofy with all the electronics, i have one in my f250 and i have to reset the excellerator every so many months, it gets sluggish sometimes like i got bad gas,

@ryanpanik8989 2 жыл бұрын

Tim curious question that I think you could have a very good explanation on. How do you now separate your work time from your family time vice versa ? Especially now that your not in the woods all the time. Would be nice how to know how to explain the difference to the younger generation

@rajbeekie7124 2 жыл бұрын

Tim's perspective could be different from someone way younger or has a different hunger level. Many people starting off a new business are pretty hungry. There is little separation. In the early stages of business development in a competitive space there is no time to entertain family separation/balance. It is what it is. There is also no notion of 9-5. For many, it is 12-20 hours a day with little separation. Tim already has a brand. Many people know him. He can choose how aggressive he wants to be. Young people need to develop their brand. They have to hustle. Now, if the younger generation wants the 9-5 with lots of separation they could become government workers, office workers, accountants, etc.

@MilesG6010 7 ай бұрын

Umbrella, butter, whip unbrella

@troytreeguy 2 жыл бұрын

Knife need to be changed regularly and the bed knife should be adjusted up right to spec for optimal performance and and, sharp adjusted machines run longer without bearing issues because the forces are as they were designed. Be sure a super clean surface for the knife and bed knife. You are smart to have a bed knife on hand, it will get rounded and you’ll notice it hitting harder when it chips on a rounded bed, it makes a bit of a wedging action. Always remove the bed knife and clean debris when resetting the bed, you can just loosen the holds and run it up but debris works in, tolerances are important to chipping efficiently. Well done Tim chip on!

@metlmuncher 2 жыл бұрын

The pick up and drop off deal is how most get their knives done up this way.

@pauliossi2674 2 жыл бұрын

Clearance adjusjments looking god from here, almost close enough to cut Ben Franklin's hair

@johnmartin-sg7cv 2 жыл бұрын

Did you locktight the bolts for the anvil and blades or just torque them up to spec. Got to do mine soon so be good to know.

@cotontop3 2 жыл бұрын

Put them in and torque them. Bandit says loctite but quite a few people and bandit mechanics said not to loctite.

@briansnik1848 8 ай бұрын

@@cotontop3what was the torque spec for the anvil bolts underneath? I just flipped mine adjusted it all up aaand, watched your video aaaand My bed knife is on backwards. Dang it. The good thing is it's been backwards since I bought it. The flip only works if it was on there right to begin with! Otherwise it's a flip and helicopter rotate👍. Or yours was backwards and now mine is too! Holler back about this. Need torque spec and specific orientation of the need knife itself. Mine was sharp edge on top pointing at you when you looked into the feed. Seems wrong to me so I changed it to look like yours

@briansnik1848 8 ай бұрын

75 ft lbs.. and yes my anvil was upside down... you the man tater

@martineastburn3679 2 жыл бұрын

Flip over the gauge for it to register. Watch fingers...

@jeffclark3558 2 жыл бұрын

Gettin her ready for Ian???⛈⛈⛈⛈

@timladnier1644 2 жыл бұрын

That has to be a "Mississippi saying" as I have heard it my entire life.

@WestonDeutschlander 2 жыл бұрын

Be careful running that thing without the clutch engaged.....even for short amounts of times. Destroys clutches real quick. Read the sticker with the operator and the money fluttering by "good operators don't waste money" something about pilot bearings..