Jeti - automated repeat telemetry announcements

[@mypanicbutton9194]

Harry, was struggling with trying to figure out how to make timers not reset when powering off. Thanks very much for the Toolbox tip. Ditto for setting the proportional trigger!

[@Stefan-zf3he]

Hi Harry, thanks for your great Videos. I have a question. Is it possible to repeat the capacity every z. B. 500mAh not every 20 seconds. Best wishes fron Bavaria. Stefan

[@cotswoldpilot]

just make a series of Alarms, each at a different value, for example >499mAh, >999mAh, >1499mAh and so on.

[@Stefan-zf3he]

@@cotswoldpilot thanks a lot.

[@kirkglundal4289]

Hello Harry, another fine video! Thank you! I do not yet have the Telemetry Control on my radio currently so I have to ask... Would the Telemetry Control module work with the receiver 'off'? What I mean is I'd like an alert if I neglect to power on my receiver in my glider. For example: If the telemetry shows a Rx Voltage of zero AND I press the Launch switch. At first I figured a Logical Switch but LS lacks Telemetry as an input. Will Telemetry Control work for this? It appears so...

[@cotswoldpilot]

Hello Kirk, your idea works, and yes you need Telemetry Controls. It doesn't really matter which parameter you use, you should set a default value that the switch goes to when it sees no telemetry. For this you set the default value to +100%, so when there is no telemetry the Telem Control outputs +100%.. Logic switch that AND your launch switch position and then use the logic switch to start a Sound on Event, which I suggest setting to repeat so it will keep talking to you until you switch on the receiver, rather than just announce it once which you might miss.

[@hamiltonshangar]

Thank you Harry!

[@DL6UK]

I´d love repeat the height of my glider every 20s, the vario every 3 seconds, the current every 60s. I haven´t found out a way to do this. Do you have a suggestion? After having bought my Jeti system I have watched all your videos. They are better than every manual. I appreciate your work. Thanks.

[@cotswoldpilot]

kzbin.info/www/bejne/gISukJijr8mXpck

[@DL6UK]

@@cotswoldpilot Just watched it. Thanks a lot for your immediate competent answer!!!!