Coturnix Quail Feeders - Dealing with Feed Waste

[@KayaksenFlores]

Thank you for Your time and detailed Info.

[@benthere8051]

I made a no-waste feeder out of a 1-foot section of 4" PVC pipe. I drilled eight, 1.25" holes, 1.5" off of one end. I installed a pressure test plug as a floor of the feeder. But the key of the feeder is the top of a 2-liter bottle that only lets food down into the base when the quail eat what is currently in the bottom of the feeder. It will feed eight quail at a time and won't allow the quail to waste food. Any food they sling stays inside the feeder. The materials cost for the feeder was less than $5 and it will hold nearly two quarts of food.

[@CoturnixCorner]

Would like to see this one. Send me a pic on FB if you would.

[@40youngbuck]

Would like to see a pic as well

[@ngale3218]

See I c please

[@chickenhawkfarmstead8478]

Awesome I think I am going to print some of these feeders with my 3d printer. It should be a easy design and print

[@scottmoorman1780]

Thanks for the info Terry.. Nice video

[@CoturnixCorner]

Welcome

[@pasttime8450]

I use the j feeders and I have pretty much 0 loss with wire over it I really like them thanks for sharing Terry

[@CoturnixCorner]

Absolutely, glad you liked it.

[@eric.norma.hamacher]

Great video, thank you so much! Your channel has been my go to for information as I get ready to begin raising quail. Please keep the videos coming. God bless

[@CoturnixCorner]

Glad you enjoy the channel.

[@ljtminihomestead5839]

Thank you Terry. Good video. Still haven't found decent design for our outdoor setup. Closest is son did gutter trough with wire ontop for 1 cage, works well, but we'd love figure out some kind of container that feeds into it. Staying away from anything on outside cages because of other animals/predators getting freebies.

[@CoturnixCorner]

I hear ya, a lot of people are still looking for a decent outside feeder that they can fill outside the cage.

[@Sim_JFD]

Ever since I started feeding fermented feed and in partially closed feeders, food waste went from ~20% to almost nothing. As a bonus they overall eat a lot less. Probably saving like good third of feed budget this way.

[@johnkillen588]

AS always ya got some excellent ideas..........thanks!

[@thelarochellefarm595]

Nice Terry, unfortunately I can not use open feeders outside the cage as it attracts the wild birds into the barn.

[@CoturnixCorner]

Close the door :)

[@thelarochellefarm595]

@@CoturnixCorner I wish I could, the chickens and geese come in and out all day, same with the goats.

[@CoturnixCorner]

@@thelarochellefarm595 I know, I was joking 🤣

[@thelarochellefarm595]

@@CoturnixCorner I use to have open feeders on the outside of the cages, one day I walk around the corner and see the chickens jumped the fence and we’re going in to eat the quail food in the bottom cages. Add that to the wild birds flying in and out I just couldn’t win. 🤦‍♂️

[@cuper1monta496]

I like the trough idea, could you make that using plastic rain gutters with end caps?

[@CoturnixCorner]

I think you probably could.

[@LuisRamirez-fy4lh]

I have my cages outside so I use jay feeder and 1/2x1/2 wire

[@RehoKevin]

Great video Terry, detailed and informative as always. Thank you. I think I'll try those trough feeders. Have you done a build video on the all wire cages shown in this video? I'm using the wood frame cages that you did a build video for quite a while ago, but I like the design of the all wire cages in this video. Any help you can offer would be appreciated. Thanks again for all of your great content.

[@CoturnixCorner]

thanks for watching

[@yellotang]

I wish I could use open feeders as well. I have to snake proof the entire cage including the egg rollouts, therefore I have to use J feeders. Lots and lots of waste, I'm hoping that your tip of not pushing food down will eliminate that problem.

[@jackiechang518]

Hi Terry, Thank you so much for all your help with new comers to keeping quail. Where can I purchase the 36” trough style feeders? Thank you.

[@CoturnixCorner]

I get mine at HatchingTime.com

[@sanfordsattic3278]

Thanks Terry. Do you really need a feeder (Hatching Time type) to go all the way across the front of the cage? Is there a rule of thumb as to number of birds and length of feeder needed? I find that as long as my birds have not run out of food, they have no problem sharing a smaller feeder. I ask this as the shorter feeders are less costly. It is about saving money. Thanks.

[@ARTmentroutStudios]

Is the entire cage on a tilt for the eggs to roll out?

[@alejandrobonilla7358]

I need some advice on how to give calcium to my quails.

[@ambeegaming76]

Feeding Trough looks nice but I'd like to know how to build one like it cuz they are WAY over priced.

[@jameskain2919]

Where did you purchase your floor wire? Is it 1/2" x 1" ? Thanks

[@gordonhemping3185]

Do Jumbos have any trouble getting their heads through the the 1x2 wire to get to the trough trays ?

[@plurmingo1]

Looks like they are too deep. Can they eat all the food easily ? I’m looking for a good feeding system. Mine still have the baby feeder that looks like a flower and they waste about a 1/3c every day.

[@staceyywright8240]

I can only have 4 in my town. Should I get 2 pair or a male with 3 hens?

[@edgreywolf]

great!

[@michaelburton3322]

Please don't encourage people to go to Walmart as it hurts local small businesses and helps China.

[@TheMichaelGrace]

What’s your alternative?

[@CoturnixCorner]

. $.98 cents?

[@carlossmith607]

WalMart preys on the poor, the fixed income, the lazy, and the stupid. With a little bit of effort a consumer can usually find a better deal than Walmart prices.