Do you add another layer of epoxy after? Spray clear rustoleum? Then epoxy? Thx!
@CourtneysCustoms2 жыл бұрын
I just added a couple more layers of epoxy 💜
@sandyhardman22682 жыл бұрын
@@CourtneysCustoms THANK YOU!!!
@TheMsnielsen Жыл бұрын
Can you use a clear spray primer to keep the stainless steel gray color?
@Suzieq0002 жыл бұрын
Will you epoxy over the tattoo to finish it off ?
@CourtneysCustoms2 жыл бұрын
Yes
@loyalty7733 жыл бұрын
Can I use regular glitter?
@CourtneysCustoms3 жыл бұрын
No, you won’t get the same effect
@ceciliaschouweiler48563 жыл бұрын
Does the glitter need to be a specific type of texture or can it be any type of glitter?
@CourtneysCustoms3 жыл бұрын
It needs to be holographic
@ceciliaschouweiler48563 жыл бұрын
Ok great! Thank you for your help!
@kirabowden63492 жыл бұрын
i have a idea but im wondering can I do a crackle straight over tack it with glitter and without epoxy in-between?
@CourtneysCustoms2 жыл бұрын
I don’t see why not!
@sandracarrillo51503 жыл бұрын
Does it matter the brand of makeup brush you use?
@CourtneysCustoms3 жыл бұрын
I’m using a blush brush because it’s super soft. Just as long as it’s not too rough it doesn’t matter
@monique3503 жыл бұрын
My next project!
@dewandaify3 жыл бұрын
Do you seal the tattoo with anything or will it come off if you don’t seal it?
@CourtneysCustoms3 жыл бұрын
As long as you add epoxy it’ll be fine
@driagriffin74783 жыл бұрын
What’s the difference between the tack it and mod podge?
@CourtneysCustoms3 жыл бұрын
Mod podge dries completely, tack it stays sticky
@monicaescarcega6951 Жыл бұрын
Did you need to seal it at all?
@CourtneysCustoms Жыл бұрын
Yes with epoxy
@cathyarce90079 ай бұрын
Nice
@lynnebizlyne4362 жыл бұрын
Turned out great! Thank you for sharing!
@CourtneysCustoms2 жыл бұрын
Thank you!!
@tamijohnson98702 жыл бұрын
can you use anything else besides Tac it?
@CourtneysCustoms2 жыл бұрын
Not for this method
@s.c.9452 жыл бұрын
For some reason this just popped up on my feed. A year too late of course. Lol I have a question… And maybe you answered it previously but I didn’t see it when I scrolled through… Does it have to be a certain type/brand of glitter in order to rub it off like that and get the shine right away? Or do any glitters with the tack it do that? Also, Does it have to be extra fine?
@CourtneysCustoms2 жыл бұрын
Hi!! It needs to be a holographic or laser glitter. Fine works the best but I’ve seen people do it with chunky
@s.c.9452 жыл бұрын
@@CourtneysCustoms thanks! I’m looking into some now! Excited to do one of these! Yours came out great!!!
@LOVESTOWRITEKID243 жыл бұрын
i know its not a tumbler but i tried googlin do u think this method will work 4anythin besides tumblers ect like rolling trays for instance
@CourtneysCustoms3 жыл бұрын
I think it would !!
@ladiamond50363 жыл бұрын
Where can I buy the tack it mod?
@CourtneysCustoms3 жыл бұрын
You can get some from the glitter grind there’s a link in the video description for them😊
@ladiamond50363 жыл бұрын
@@CourtneysCustoms thanks love
@mslorena10763 жыл бұрын
I LOVE the fact that you are doing first time projects without you not knowing what the outcome would be. No shame and I am more a fan. How else will anyone learn that is okay IF you do mess up. However you have been doing so damn good with your projects.
@CourtneysCustoms3 жыл бұрын
Aww thank you so much!
@mslorena10763 жыл бұрын
Could you put epoxy over this tumbler if wanted to? I think I'd be scared to wash it and thinking that the tattoo or Glitter or tattoo would come off.
@CourtneysCustoms3 жыл бұрын
I epoxied off camera! My older videos aren’t very good I’m sorry. I promise my newer videos are better😂
@imyolea3 жыл бұрын
Omg ty you just changed my tack it world
@CourtneysCustoms3 жыл бұрын
You’re welcome !!
@عالمكوثرالمتنوع3 жыл бұрын
Good luck nice vidéo
@CourtneysCustoms3 жыл бұрын
Thank u
@bridgetburdick67912 жыл бұрын
Do you have to get a certain type of temporary tattoo or just any kind? Also, can it scratch off if you don’t epoxy it afterwards?
@CourtneysCustoms2 жыл бұрын
Any kind. And yes definitely epoxy afterwards or it’ll scratch up
@thaliyah_thai3 жыл бұрын
Hi ! Before you apply tack it do you do anything before that ? Like prime the cup first ?
@CourtneysCustoms3 жыл бұрын
Yes I sand and paint
@thaliyah_thai3 жыл бұрын
Sorry I have a lot of question . Do I have to paint it ? Can I just sand it and apply tack it ?
@CourtneysCustoms3 жыл бұрын
@@thaliyah_thai you’re fine !! You can try but I always suggest to paint
@thaliyah_thai3 жыл бұрын
What kind of paint you recommend 😊
@CourtneysCustoms3 жыл бұрын
@@thaliyah_thai definitely rustoleum !!
@yolandacorbett65623 жыл бұрын
Did you epoxy the tack it tumbler after applying the tattoo or how did you seal it?
@CourtneysCustoms3 жыл бұрын
Yes after the tattoo came a couple coats of epoxy
@lutorres33 жыл бұрын
Just curious but can I use tacky glue? instead of tack it? and wow that is so pretty
@CourtneysCustoms3 жыл бұрын
Unfortunately no, I tried that and it doesn’t work. But you can dilute tacky glue with water and make your own mod podge
@MileyonDisney2 жыл бұрын
Okay. You have an empty Tack-It bottle. Why not fill it halfway with your new Tack-It and add water directly into the bottle? That way, you don't have to mix a new batch every time you need some. Or, if you have a bottle that's 1/2 or 3/4 full, just do the same.
@annamonicaarriaga65593 жыл бұрын
What is the name of the glitter you used
@CourtneysCustoms3 жыл бұрын
Interstellar from The Glitter Grind theglittergrind.com?sca_ref=415856.Coj81gkGqJ
@paulablanchard60023 жыл бұрын
I am so new to the tumble scene.. did you seal it after you put on the tattoo? and if so was it with epoxy?
@CourtneysCustoms3 жыл бұрын
After all the water dried I added epoxy, and I’ll add another coat tomorrow just to make it nice and strong !!
@0615doris3 жыл бұрын
@@CourtneysCustoms on your epoxy is it the 2 step process?
@misssugad38303 жыл бұрын
What kind of paper did you use for the tattoo?
@CourtneysCustoms3 жыл бұрын
These are tattoos from amazon
@kimberlywhite46303 жыл бұрын
I have done several of these they sell quick because they are different. Try different micas and brush them on!!!! They look amazin.
@CourtneysCustoms3 жыл бұрын
Oh awesome I’ll definitely try that !!
@NinaCristina12a3 жыл бұрын
I would love a video on adding mica Courtney.
@CourtneysCustoms3 жыл бұрын
@@NinaCristina12a I can do that !!
@CourtneysCustoms3 жыл бұрын
@Leah Lawrence it’s so fun and easy you’ll love it
@CourtneysCustoms3 жыл бұрын
@Leah Lawrence I did after everything was good and dry
@hopebrandel33083 жыл бұрын
I did mine over a sliver glitter doing tack it method. I am still seeing my outline of the tattoo. I add a little glitter into my epoxy to see if I could cover the outline. I still see it faintly. Any suggestions for the next time I try? Thanks for the great tutorials!
@CourtneysCustoms3 жыл бұрын
what brand of water slide paper are you using ?? I use Hayes and it’s my favorite by far !!
@hopebrandel33083 жыл бұрын
@@CourtneysCustoms I am using Sunnyscopa brand from Amazon. I will have to check out that brand. Thank you!
@leewarren98173 жыл бұрын
How long do you wait after you applied the first layer of tacit, before you add the 2nd layer? Then how long do you wait until you add the glitter?
@CourtneysCustoms3 жыл бұрын
applied the second layer about 5 minutes later, then the glitter about 5 minutes after the second layer
@malialouis9473 жыл бұрын
I have never tried any tattoo or tack it tumblers yet... and now I will! Thanks Courtney!
@CourtneysCustoms3 жыл бұрын
You’re so welcome !!
@LynnB87943 жыл бұрын
THAT IS A GORGEOUS CUP!!!
@CourtneysCustoms3 жыл бұрын
Thank u !!
@angiemills40703 жыл бұрын
THAT. IS. AWESOME!
@CourtneysCustoms3 жыл бұрын
Thanks so much !!
@pattibaldwin55693 жыл бұрын
I love this cup and this technique. What kind of epoxy do you use?
@CourtneysCustoms3 жыл бұрын
Thank u !! I use KS Resin. Links are in the description
@vonellevanzant2373 жыл бұрын
Yay! This is a good tip!! Thank you!
@CourtneysCustoms3 жыл бұрын
You’re very welcome 😊
@joeayers13 жыл бұрын
So you seriously don’t have to seal it with anything? Won’t it come off like it does on your skin after so many times being wet?
@CourtneysCustoms3 жыл бұрын
you seal it with epoxy. at the end of my video I had mentioned once the water was dry I was going to add a couple coats of epoxy🙂
@karennixt28793 жыл бұрын
Love it! love using temporary tattoos. really like your idea to use the makeup brush. one question, how to do clean your brush? Thank you for your tutorials, I enjoy them a lot
@CourtneysCustoms3 жыл бұрын
Thank you! I just clean them with soap and warm water
@RPerez-dm7fv3 жыл бұрын
Background image is everything
@joycepugh53473 жыл бұрын
Love it - what is the name of that tat?
@CourtneysCustoms3 жыл бұрын
Thanks !! Here’s a link to the tattoo. It came in a large pack with others DaLin Extra Large Temporary Tattoos Full Arm and Half Arm Tattoo Sleeves for Men Women 20 Sheets www.amazon.com/dp/B07777X492/ref=cm_sw_r_cp_api_glc_fabc_8zTbGb8BY610F
@LovelyMrsCourtney3 жыл бұрын
What is the dry time or tack time in between coats?
@CourtneysCustoms3 жыл бұрын
Like 5 minutes, it dries super fast !!
@cyndiphone60043 жыл бұрын
I tried the tack it method and mine isnt turning out right!! What could I be doing wrong??
@CourtneysCustoms3 жыл бұрын
What is it doing ?? Are you using the Aleens Tack it Over and Over ?? My first time I accidentally bought Tacky Glue and it’s not the same
@cyndiphone60043 жыл бұрын
@@CourtneysCustoms yeah im using the aleens tack it. I only did 1 coat and then put on my glitter... Does it have to be holographic?
@leaserafin6012 жыл бұрын
Stunning. Can’t wait to try this
@kimlandis43603 жыл бұрын
OMGOOOODNESS Ms Courtney that is flipping Fantabulous 🙌🏻🥰💀 I’m new to tumbler making and I had NO idea you could do that...thank you so much for your wonderful video❣️😊😍
@CourtneysCustoms3 жыл бұрын
I’m glad I could help you !!💜
@bunnibieaguilar9293 Жыл бұрын
@@CourtneysCustoms did you seal the tumbler with anything?
@CrystalWilliams-rt3zm3 жыл бұрын
Do you have the flip flop strawtopper if so can you do a tutorial on how to do them Thank You in advance
@CourtneysCustoms3 жыл бұрын
The only strawbler I’ve ever done a tutorial on was my LED Christmas light tumbler. I hope this helps !!
@NinaCristina12a3 жыл бұрын
I have made several tattoo tumblers that came out awesome, but when I put vinyl on my last tack it one, the transfer tape pulled up some glitter. I’ll definitely epoxy first next time. Thanks for always being upbeat.
@blessedmama40653 жыл бұрын
Can you seal the tumbler with something else like Mode podge, another coat of tack it, something else besides epoxy? I have been told over and over again that epoxy is very hazardous to your health, even with a mask or respirator. But i get asked alot by customers in my small town about custom tumblers.
@CourtneysCustoms3 жыл бұрын
Epoxy is the only thing that will really keep everything permanently on the cup. There is a product called Crystalac that is epoxy free and suppose to act as epoxy. I tried it before and didn’t care for it, but if you have concerns with epoxy, check out crystalac !!
@missyroberts4273 жыл бұрын
Awesome!! I have temp tattoos, but haven’t used the. I wondered if you could just jump right in after the tack it method and now I know. Thank you for sharing. It turned out beautiful
@CourtneysCustoms3 жыл бұрын
I’m glad I could help !!
@artisticintentions78903 жыл бұрын
Very cool!!💜
@CourtneysCustoms3 жыл бұрын
Thanks !!💜
@cxdubose53 жыл бұрын
I have used temporary tatoos before on a tumbler. Came out BEAUTIFUL!!
@theresaraddatz-melancon93343 жыл бұрын
I’ve never tried to make a cup with a tattoo. I might have to try since you made it seem fun! Thank you.
@CourtneysCustoms3 жыл бұрын
You’re welcome😊
@debbiedeshong56023 жыл бұрын
Well now I know what to do with that exact tattoo. Awesome video!!
@CourtneysCustoms3 жыл бұрын
Thanks so much !!
@debrasmith60343 жыл бұрын
Love it!! Cheers☕ from Ontario Canada. Stay safe😷
@CourtneysCustoms3 жыл бұрын
Thanks so much !!
@rbontrup3 жыл бұрын
Wowzers!!!❤❤
@CourtneysCustoms3 жыл бұрын
Well thank ya !!💜
@amberbernicke79563 жыл бұрын
I didnt know you used epoxy on this tumbler
@CourtneysCustoms3 жыл бұрын
Yes I put epoxy on every tumbler so all the glitter and designs stay on the tumbler
@amberbernicke79563 жыл бұрын
@@CourtneysCustoms so applying epoxy won't mess up the tattoo
@CourtneysCustoms3 жыл бұрын
@@amberbernicke7956 no not at all !!
@sikmuga3 жыл бұрын
These are so awesome!!!! Thank you so much!!! One question - did you epoxy over this to finish it off? I would assume so but wanted to ask :) LOVE your videos!
@CourtneysCustoms3 жыл бұрын
Yes I did !! I’ll do two coats. Thank you so much !!
@sikmuga3 жыл бұрын
@@CourtneysCustoms Thank you!!
@corinatrevino97453 жыл бұрын
That looks great!! I definitely need to try this. 💖