Craftsman Pressure Washer

Craftsman Pressure Washer:) www.lowes.com/pd/CRAFTSMAN-28...
Playlist:) • LS SWAP G BODY MONTE C...
#mrrandom #craftsmanpressurewasher #unboxing #Review

[@BLACKRAIN390]

YEAH,,,YEAH...👍👍👍

[@MRRANDOM1]

Thanks fam 💯🤝🙏🏾

[@kierstenidzorek6532]

UPDATE:1 year and still cranks within the first 2-3 pulls. Probably will buy another when this one finally does bite the dust kzbin.infoUgkx43QMbQqu67IZadu9ou8Sg1BdrunMRNqX . No issues at all. Very happy with it.UPDATE: After 6 months of use and over 70 uses I would still highly recommend this pressure washer. It does vibrate a decent amount but never had it “walk” like others have mentioned. No oil leaks, still seems to run like the day I bought it. Still cranks within 2-3 pulls every time. Very happy with my purchase!Have used it about a dozen times now. Plenty of power, cranks up on 1-2 pulls every time. My only complaint would be I wish it was a little taller to make it easier to walk with it (hits my ankles a lot) and that the two hose connections were a little further apart but it hasn’t caused me any issues. Seems to run a good 1-1/2-2 hrs on a full tank, overall a well built machine and definitely worth the money in my opinion.

[@MRRANDOM1]

💯💯👊

[@rubenhernandez4394]

Finally a video straight to the point! 🔥

[@MRRANDOM1]

💯💯👍

[@k10h73]

Thank you for explaining how to put together! My daughter and i were attempting and i was getting very frustrated. HUGE help

[@MRRANDOM1]

You are so welcome! Glad i was able to help

[@hualaanbaaching-ching1527]

Thanks for the video. I just bought one myself and was having problems assembling and starting it.

[@MRRANDOM1]

Thanks, Glad I was able to help! 💯

[@coreysmoot8775]

Thank you my brotha!! I appreciate the information. Be blessed.

[@MRRANDOM1]

Blessings fam 💯💯

[@Dougs-Ear-Hole-Entertainment]

Thanks for the review. Just bought one. Thanks.

[@MRRANDOM1]

Thanks for stopping by it’s works pretty good I’ve had some people give their opions on it as well

[@ron5977]

I took mine back after a few hours of buying it. Craftsman with briggs & stratton motor kept cutting off every 20 min but I could start it right back up with no problem, just a pain in the rear it should not do that. I did end up buying the craftsman with the Honda motor about a hundred dollars more but its like night and day. Stick with the Honda motor the last one I had lasted 15 years. So far so good.

[@MRRANDOM1]

Yessir Honda Is the best! I haven’t had any mechanical problems yet I’ve used it about 5 times so far I hear lots of stories on these. Thanks for stopping by 💯🤝

[@MRRANDOM1]

My dad has the craftsman unit with the Honda engine. I believe it is the same PSI around 2800

[@Changesonemack]

THIS is the exact question that brought me here. I thought I was doing something wrong!! Like wt...i want to finish here. Thinkin now I’ll take it back as is cus the box is gone. Have a Honda push mower and love it. Thanks!!

[@MRRANDOM1]

@@Changesonemack thanks

[@SmilezWithShane]

What's going on family.. seems like you'll get good weather year long.. that's a dope purchase for sure

[@MRRANDOM1]

It's getting better Fam! I hope all is well your way! Stay safe! 💯💯🤝🙏🏾

[@goyslop4289]

Hey man make sure to run water through the wand with the engine off until it stop spitting air, if to much air goes through the pump while it's running it won't last to long, also use a pump conditioner and drain the tank when your going to be storing it for long periods of time. Nice machine you have there take care of it and it'll last many years!

[@MRRANDOM1]

Thanks for sharing 💯🤝

[@gntleh2o627]

I just bought this one. Hoping it treats me better than the 3300-PSI 2.4. It kept shutting off. After three of the four screws holding the motor in place fell out, I realized that I was missing the fourth screw. Took it back. Opened the new one up before we exchanged it and it also only had three of four screws holding the motor in place.

[@MRRANDOM1]

Wow, very poor assembling. I hear a lot of people complaining about them but mines haven’t gave me any problems so far 🤞

[@JoyfulFollowerofJesus]

I like how detailed you are man. Thank you! Can you tell me something? After hooking up both hoses + Gun, then turning on water from house, but before starting the pressure washer. Hopefully you’re following me so far as I try to help you visualize using words. If you look from the back of the pressure washer and on the left side of the water pump do you see a little transparent white plastic piece spraying water? Remember this is before starting the engine

[@MRRANDOM1]

No sir no leaks

[@ssgang777]

Looks strong. Looking for one to clean house and drive way with. Would you recommend this model ? And does it come with a soak can

[@MRRANDOM1]

yessir mines have been good but others have problems with them

[@autobez3132]

Tuning in let’s go # 🚗 🚘

[@MRRANDOM1]

Thanks fam 💯🤝

[@roseorchid7981]

New sparkplug, fresh oil and it wont start...what to do before i set it on fire and watch it burn

[@MRRANDOM1]

So many people have problems with this unit, just set it on fire 🔥 mines still burning 🥵 never had a problem with it starting. Check for spark going to the plug or try clean carb, it may not be getting fuel also check kill switch. Good luck 👍

[@SFMurchison]

Have you tried the pavement scrubber attachment yet? It's the way to go...

[@MRRANDOM1]

I have, it works great. Gotta get me one

[@anaelzuniga3432]

Good job!

[@MRRANDOM1]

Thanks!

[@kenwright7615]

How to remove the pins to take off the accessory craftsman tray

[@MRRANDOM1]

I haven’t got that far yet. Looks like it may be riveted

[@tonyadams09]

Damn you getting shot at

[@MRRANDOM1]

lol

[@eastcoastnews9529]

Don’t waste your money on this unless you put an electric starter you’ll be breaking your arm if you live in the north good luck trying to start Dist if you live in the south you might get it started

[@MRRANDOM1]

It’s started second pull every time for me. I’ve own it over a year now.

[@eastcoastnews9529]

@@MRRANDOM1 it was flooded with gas in the crankshaft . I closed it and open it up, letting it dry then try it. It’s been a pain since day1 , it’s taken a few cranks . Will see, at least now it got cleaned out and oil change 😂🤌🏻

[@eastcoastnews9529]

@Scotty Do you have a video on that for a 2020 Ford Ranger XLT?

[@MRRANDOM1]

Run some degreaser in your pump. My cylinder flooded with gas as well. I used it today and whenever I get a chance. Put some seafome in the gas as well

[@RandomVids519]

Love the KZbin name😉

[@MRRANDOM1]

Thanks family

[@carlosbryant1737]

Pulled 100 times mines never started. Just purchased from Lowe’s today. Took 1 back that had no pressure. Not looking good.

[@MRRANDOM1]

I hear a lot of bad things about these units, lucky I haven’t had any problems with mines besides the oring missing out the Nozzle 🤞Good luck

[@tripleooo7881]

Always purge before you start the engine family.

[@MRRANDOM1]

Thanks for sharing the knowledge 💯🤝

[@mr.m.o.g.o.m.]

Also be careful with the hose. It’s a polyurethane hose and is easily ruptured I went through two of them before I bought a rubber one.

[@MRRANDOM1]

Thanks for stopping by and sharing the advice

[@mickey6177]

yep mine just ruptured and I don't even know how. where'd you get the rubber one??

[@mr.m.o.g.o.m.]

@@mickey6177 I got it on Amazon it was fairly inexpensive I can get you the link if you want it's held up rather well

[@mickey6177]

@@mr.m.o.g.o.m. can you send the link please

[@dicktony8330]

This guy sounds like he from the big easy

[@MRRANDOM1]

Yessir 🫡

[@UrijahBen74]

I have a Dewalt 4400 psi 4 a gallon a minute machine if I get there close to the concrete it will damage it.

[@MRRANDOM1]

Damn sounds serious

[@TjaMadison-oh5il]

U didn't show turning it on is it down or up

[@MRRANDOM1]

On is up! Put a degreaser in you pickup Bottle to save your Pump

[@milo74156]

The house break right at the connections

[@MRRANDOM1]

Havent had any problems so far thanks for sharing

[@housecharlie]

Good video bud!!!

[@MRRANDOM1]

Thanks! A lot of info in the comments

[@smartbomb5362]

i bought one and cant get it to start. any advice is appreciated

[@MRRANDOM1]

I haven’t had any Issues with it running. Only problems I’ve had was with the Nozzle. First it was missing a O-ring so I swapped it out, Second problem was it got clogged, I had to break it down and apply pressure until it was able to break free. Thanks for stopping by! 🤝

[@rosemarieephlin5010]

😊a way

[@jeffersonprodrigo]

Why Anitta is not there?

[@MRRANDOM1]

Who is that?

[@bradleymcneely4652]

Why does it have 2 oil dipsticks

[@MRRANDOM1]

One for the oil level and the other for the catch can! Thanks fam

[@dc4l157]

You forgot the soap!

[@MRRANDOM1]

😁🫴

[@rosecastillo5385]

Where do u add soap

[@deshalall5075]

I got one ❤

[@rosecastillo5385]

Where do. Add soap

[@MRRANDOM1]

In the white jug at the bottom

[@rosecastillo5385]

Mine doesn't have jug did I purchase separately

[@Alfactors]

I know I mean you're late If it breaks good luck trying to get it fixed

[@MRRANDOM1]

I can fix anything. I’ve had this machine 2yrs no problems still running strong

[@YourMothersHouseChillin]

This thing is a P.O.S and I bet you agree after a year of having it. I owned one an so did a neighbor of mine. The pump went out on both ours....go figure.

[@MRRANDOM1]

Mines still kicking and working good…

[@YourMothersHouseChillin]

@MRRANDOM1 bullshit...You know you replaced that pump.

[@jasonkalusz4275]

Yourn

[@liongold8]

Pour the whole bag in there smh

[@MRRANDOM1]

Huh

[@SamCanada1]

:)

[@MRRANDOM1]

hi sam

[@SamCanada1]

@@MRRANDOM1 Thanks for the video! :)

[@jas350]

All Chinese junk. Make your own from a 3 hp snowblower

[@MRRANDOM1]

Mines still working good

[@jas350]

@@MRRANDOM1 mines? Mines blow up or are in mountains. Did you mean Mine?

[@kanokiljoy5582]

This is the biggest piece of crap I've ever purchased. I used it for 3 hrs before it completely shut down

[@MRRANDOM1]

Mines been working fine going on 3yrs

[@MikeZX14rrrrr]

You need to put oil in her.. lol