My Grandfather (Nicholas Sulentic) who invented this box would be both proud and grateful. Well done!
@restorecreate5 жыл бұрын
john sulentic ,what you are saying is very beautyfull,and also that something after so many years excist and reminds your grandfather,thank's a lot.
@Fucknuts4u4 жыл бұрын
"Invented?" What was there to invent on this box that wasn't already invented on previous tool boxes?
@rong-man15022 жыл бұрын
I appreciate the “body work” in getting the dents out. Mark of a true craftsman.
@restorecreate2 жыл бұрын
Thank you Ron G-Man.
@vllrrql2 жыл бұрын
You are a restorative Angel and Gentleman! You helped a great toolbox avoid a sorry dump landfill death! Thanks forever! Kerp up the great work and videos!!!
@restorecreate2 жыл бұрын
Thanks a lot anthony villarreal !
@markharris57715 жыл бұрын
My late father had a very similar toolbox as his 'working' box about 55 years ago, the one that had the tools in he was most likely to need. His had a removable tray in it making it two layers inside. Another great restoration and the box has many more decades ahead of it. It toolbox looked fantastic when finished. Thank you for a fantastic video that brought back some special memories.
@restorecreate5 жыл бұрын
Thank you Mark, i didnt find the inlay tray inside when i took it,maybe someday i will make one.
@freetolook37275 жыл бұрын
Interesting color choice for a Craftsman tool box.
@restorecreate5 жыл бұрын
Thanks ToughAncientSpark,but the shop where i took the color,could not fix the original color.
@mitchmurrell7533 жыл бұрын
I want to start doing this. Nice work chief.
@restorecreate3 жыл бұрын
Thank's a lot Mitch Murrell !
@itsabughunt63103 жыл бұрын
Beautiful!
@restorecreate3 жыл бұрын
Thank you !
@ronduval11423 жыл бұрын
Ron Duval Ron Duval 0 seconds ago what did you do to restore the two latches??
@restorecreate3 жыл бұрын
Ron Duval I did not remove them from their place because I had to damage their rivets and then I could not find the same ones, so I rubbed them and polished them as they were.
@RESTORATIONOFSCRAPMETAL3 жыл бұрын
Great job buddy, and beautiful result 👍
@restorecreate3 жыл бұрын
Thanks a lot Andrey !
@bevviebyrom54715 жыл бұрын
its very beautiful. reminds me of the one my grandfather had when i was a child. He was a plumber by trade. And worked on many older buildings in richardson, tx. North dallas. bascially. He was a jack of all trades. He worked very hard. He was even working well into retirement when he was diagnosed with alzhiemers. He was funny and crazy and made us all laugh. He was even downtown in the square in dallas when Kennedy was shot. It remided me of the good times I had with him. t'hank you.
@restorecreate5 жыл бұрын
Bevvie Byrom, only you remembered so many beautiful moments with your father, i got great thanks and if we lived close i would love to give it to you.Really ..... thank you for making me feel so beautiful.
@kirkhenry38674 жыл бұрын
Very wonderful and detailed restoration!!!
@restorecreate4 жыл бұрын
Thank's a lot Kirk Henry !!
@RestorationbyAlabamaCreeks4 жыл бұрын
That was a real challenge, you made it look easy. Nice presentation my friend.
@restorecreate4 жыл бұрын
Thank you Restoration by Alabama Creeks,it was a challenge because it was in a bad condition full of rust.
@RestorationAustralia4 жыл бұрын
Looks great well done.
@restorecreate4 жыл бұрын
Thanks a lot Restoration Australia !!!
@robertcolfack264 жыл бұрын
I have one just like that yours yours is missing that tool tray inside that holds sockets and other tools.....Mine is 45 years old and it looks almost new and I've used mine allot.....
@restorecreate4 жыл бұрын
Robert Colfack,i found it in a fleamarket in a very bad condition as you saw,and the tool tray was missing,maybe one day i fix one or i will find something to fit.
@sta1345 жыл бұрын
Πολύ καλή δουλειά Γιάννη....Μπράβο!!!
@restorecreate5 жыл бұрын
Σε ευχαριστω Σταυρο,αν και με παιδεψε λιγο,το αξιζε.
@КошмарКошмар-й2б5 жыл бұрын
Very good restoration toolbox 👍👍👍👍👍👏👏👏👏👏
@restorecreate5 жыл бұрын
Thanks Кошмар Кошмар.
@shannonlawsonnashville5 жыл бұрын
Nice!
@restorecreate5 жыл бұрын
Thanks Shannon Lawson.
@tonyday72335 жыл бұрын
Very nice job,
@restorecreate5 жыл бұрын
Thank you Tony Day.
@fahd00785 жыл бұрын
Nice job
@fahd00785 жыл бұрын
I can ask you about the name of the watch that you wear
@restorecreate5 жыл бұрын
@@fahd0078 thanks.
@restorecreate5 жыл бұрын
@@fahd0078 it's an old seiko,gift from my wife and i have it 20 years.
@GT_Racer3475 жыл бұрын
Very nice. I like it! 👌
@restorecreate5 жыл бұрын
Thanks Nixy J Morales .
@vincesanin4221 Жыл бұрын
What kind of solution did you use to remove the paint ? Just curious as tonwhat the blue stuff was and what it does. I have 3 toolboxes im planning on restoring.....
@restorecreate Жыл бұрын
@vincesanin4221 i used paint stripper for the old paint,and the blue liquid is rust remover.
@ronduval11423 жыл бұрын
what did you d the restore the two latches??
@restorecreate3 жыл бұрын
Sanding and polishing.
@jwhmerica5045 жыл бұрын
This toolbox now identifies as a SK toolbox. It’s trans toolbox. Hahahahaha. Good video. Love restorations of things like this.
@restorecreate5 жыл бұрын
Thanks Jwh Merica .
@RestorationbyAlabamaCreeks4 жыл бұрын
Speaking of S-K toolboxes, I restored one a couple of weeks ago, the vid is on my channel.
@eddieed_23283 жыл бұрын
you need a sand blaster or walnut shell blaster
@restorecreate3 жыл бұрын
eddie ed_2 you are right,i have been in the plans for several days to make a sandblast.
@eddieed_23283 жыл бұрын
@@restorecreate check this out. kzbin.info/www/bejne/b3SVkoNugM15ZtU , use walnut shells
@matthewf85064 жыл бұрын
What was the puddy you used the flatten the sides ?
@restorecreate4 жыл бұрын
Matthew F it's ferrous putty for metal,and the red is the hardener .They sell them together.
@jorgeeliudgarciaalfaro58364 жыл бұрын
Las bisagras no aparecen cuando las cambio estás las Pulido ?
@restorecreate4 жыл бұрын
Jorge Eliud Garcia Alfaro,la cámara no tenía baterías, solo se frotaban y pulían.
@youngjoke814 жыл бұрын
Link to those gloves you have on?
@restorecreate4 жыл бұрын
I can't see the brand now from the gloves,the letters have been erased,but if you go in any store which sells tools you will find them,in many version.
@jetskidude785 жыл бұрын
Nice restoration! I just picked this box up yesterday at a Habitat Restore a little bit less rusty and still had the tray cant wait to spruce it up.
@restorecreate5 жыл бұрын
Thanks jetskidude78 .
@michaelloomisiii34755 жыл бұрын
I love that you listen to The Chipmunks! 😉
@restorecreate5 жыл бұрын
Michael Loomis III .....no my friend,i don't listen to The Chipmunks.
@ka-powUSA3 жыл бұрын
I would have used a grinding wheel to clean all the hardware and left them unpainted.
@restorecreate3 жыл бұрын
Good thing you say Ka-Pow!, but it was painted, and the rust, especially on the bottom, was enough to change the piece. So then I had to paint it.
@pavloschrysovergis15124 жыл бұрын
Τέλειο το βίντεο ! 💯💯💯 Το rust remover που χρησιμοποίησες το προτείνεις; Ή να παραμείνω στο λευκό ξύδι με την σόδα;
@restorecreate4 жыл бұрын
Σε ευχαριστω πολυ Παυλο,το προτεινω και πιστευω θα μεινεις πολυ ευχαριστημενος.Μεχρι στιγμης δεν εχω βρει κατι καλυτερο εκτος απο την ηλεκτρολυση.
@reginaldwilkinson60194 жыл бұрын
Didn’t see the story that John Deere bought Sears.
@restorecreate4 жыл бұрын
Reginald Wilkinson no i didn't.
@reginaldwilkinson60194 жыл бұрын
Actually Stanley Black & Decker bought Craftsman brand from Sears in 1917.
@kevo12645 жыл бұрын
So what happens with the hinge, the paint doesn't cause any issues with it functioning?
@restorecreate5 жыл бұрын
Kevin,until now there is no problem,from the factory also was painted.
@billybike573 жыл бұрын
Restoring anything, the detail work will show up. You worked hard but skipped the real detail work. Removing the handle and latches, the hasp. Any job worth doing, is doing it right.
@restorecreate3 жыл бұрын
I looked to repair it doing the least damage that could be done, as I could not find its own handle rivets for example, so I let the passage of time in it seem a bit.
@rong-man15022 жыл бұрын
To some extent, I agree. I guess I can accept the hasp being painted the same color as the rest of the box, but like you, I’d have preferred to either have removed the handle or taped it up. I had a similar box and the handle was textured. My dilemma was trying to figure out how to get the old paint off of the textured surface well enough to repaint the handle. I guess I could have used paint remover as was done in this instance but I simply didn’t think of that. I had thought about using something like spray bed liner or spray undercoating to redo the handle when I got to that point but this is all moot since I let it go before I got that far. Man was that a mistake; live and learn I guess.
@retroghost22933 жыл бұрын
the limited skills made this video very hard to watch lol
@restorecreate3 жыл бұрын
Thank you RetroGhost for the remark,but I am still a small child and I continue to learn, so at some point I will reach a satisfactory level.