Another amazing tune Alec! Fantastic overview as always! Thanks so much for your kind words! 🙌 Also, that's word for word the conversation we had at the pub when designing this... no joke 😂😂😂😂
@alecbrits3 жыл бұрын
Thank you guys! :) Honestly, I can really believe that. 😂😂
@mattbang10722 жыл бұрын
You guys really did something here! This is the all in one box I think most producers dream of. Do you guys have any plans of making a version with USB C connection anytime soon? My only concern with purchasing this is that I won't be able to run Pro Tools with more than 1024 buffer size for a heavy mix session.
@cranborneaudio2 жыл бұрын
Hey @@mattbang1072! Thanks for your kind words! 🙌 We have no plans to produce a version with a USB C connector. Many devices out there with C connectors still employ USB 2.0 but over a C connector - this method gives you no performance improvement over USB 2.0 on a Type B connector (like ours). A full Type C/USB 3 implementation is expensive to produce but for us, it wouldn't give any more performance improvements. USB 3.0 can transmit larger amounts of data (which is why it is much better for USB hard drives etc) but it's still at the same speed (Bit like a motorway with 2 lanes and cards travelling at 70mph (USB 2.0), vs one with 10 lanes travelling at 70mph (USB 3.0)). Regardless, it's the implementation and other factors that really impact your CPU performance more so than the connector. We have many customers who moved from thunderbolt systems to ours and were getting better, more efficient DAW sessions as our USB 2.0 solution is lightweight and designed for low latency and low CPU impact. Your milage will vary of course, but we would have no hesitation to say you would be able to run heavy Pro Tools with ease! Hope this helps! CA
@mattbang10722 жыл бұрын
@@cranborneaudio Ah ok. I guess I was concerned because I figured, with the amount of simultaneous ins and outs, that it seemed that it would need those "10 lanes." But good to know that other customers have had no issues moving from thunderbolt to the USB 2. Really excited about this product though!
@cranborneaudio2 жыл бұрын
@@mattbang1072 No worries Matt! As we only transport 28/30 channels, USB 2 has more than enough bandwidth to do that comfortably! Our friends at RME can send 128 channels of audio through USB 2.0 - they are wizards of course, but there's plenty of room for 30 channels! Hope that helps! CA
@ryanshook82843 жыл бұрын
Yes please Cranborne. NEED that stereo mix bus insert to happen.
@alecbrits3 жыл бұрын
Ahh yeee!! :)
@Russplight3 жыл бұрын
Nice. Every time I watch your videos I forget that I'm here for the gear review. I get so caught up in how good yours songs actually sound.
@alecbrits3 жыл бұрын
Thank you so much! :)
@therealraginggun21 сағат бұрын
awesome recording, dude😎
@alecbrits13 сағат бұрын
Thanks so much! :)
@Paul-D Жыл бұрын
This thing filled with my favourite 500 series modules would be a total dream for me atm. Definitely a project im going to start building going forward, beginning with this.
@alecbrits Жыл бұрын
It’s a great unit for sure. Specially with the new firmware update. :)
@isaacchambersmusic3 жыл бұрын
Great review Alec. Your content and videos are so well produced, the lighting and Audio are top notch, and your music is lush and spacious. I know these videos take a lot of effort, so big props for that! My Cranborne 500R8 is in the mail and I can't wait to use it. Keep up the great work.
@alecbrits3 жыл бұрын
Thank you so much Isaac, that means a lot! I hope you enjoy your 500R8! The lads @cranborneaudio knocked it out. 👌🏽
@LondonSteveLee Жыл бұрын
What a brilliant piece of kit! I almost wish I was starting from scratch today - this would form the heart of my studio.
@alecbrits Жыл бұрын
Absolutely. :) my next room will start with one of these.
@stephenmcculloch30252 жыл бұрын
I'm so glad I watched this. What a beautiful song bro, thanks for sharing.
@alecbrits2 жыл бұрын
Thanks so much Stephen! :)
@RealGuild2 жыл бұрын
Has to be the dopest review I've watched. Youre talented man and I have a better understanding what this piece of gear does.
@alecbrits2 жыл бұрын
Thanks so much! :)
@SuperdangerStudios2 жыл бұрын
ANother great review man. Also hilarious. Also love the demo song. Crazy talented and informative about the gear I want! Thank you man. New favorite channel!
@alecbrits2 жыл бұрын
Thank you so much! :)
@timsagtnein78643 жыл бұрын
these videos are two of my favourite things combined. Good music and good Equipment!
@alecbrits3 жыл бұрын
Thank you so much Tim!! :)
@billyhughes9776 Жыл бұрын
More impressed with the song than the gear reviewed. Really great job. I'm trying to decide between the Cranborne 500 ADAT or the Heritage Audio OST-8 ADAT. Thanks.
@alecbrits Жыл бұрын
Thanks so much billy! :) let me know what you end up going for.
@DarkTrapStudio3 ай бұрын
Awesome song and review 9/10, 10 would be examples and real demonstrations of the routings possible Also Id really like to know more about the Cast system
@alecbrits9 күн бұрын
Thanks so much! Think Cranborne do a great job of the intricacies of how the unit works. :)
@thilipdhev3 жыл бұрын
Cranborne audio is someone who cares for the music industry, music producers. Music should not be inaccessible like how avid does. Iam upgrading my center console with cranborne audio equipments. And going to own every piece of equipment they manufacture. Huge support to cranborne audio guys, keep doing the great work. Humble request - PLS DONT EVER COME UP WITH A SOFTWARE OR APP FOR ANY OF YOUR PRODUCTS. LET THE VISUAL MECHANICS SAY IT ALL. #CRANBORNE #CRANBORNEAUDIO
@alecbrits3 жыл бұрын
Lovely words Sachin! :)
@jg15032 жыл бұрын
Awesome review. Got my R8. Love the song, my favorite of yours so far.
@alecbrits2 жыл бұрын
Congratulations!! Thank you so much. :)
@BenKash3082 жыл бұрын
Yeah this unit really looks and sounds special. I’m looking to get the ADAT version for my 16A. Flexibility just seems amazing. Like you said, these units can certainly expand nicely in your desired workflow.
@alecbrits2 жыл бұрын
It’s a beast! :) absolute joy using this device. And the fact that the ADAT version can be included into a current workflow is just a big old fashioned win. 👌🏽
@auxenemedia Жыл бұрын
Great video man. i own one myself and i am in love with this. i came from a LYNX HILO AD/DA and at first i was scared that the conversion wasnt up to par with the LYNX...i love it now! side note: This oke is DEFINITELY South African 😂😂😂😂 i have no doubts about that 😂😂😂😂 his accent gives him away 😁👌
@alecbrits Жыл бұрын
It’s a great unit for sure! Yeah! 🇿🇦 🇿🇦🇿🇦
@keomo3 жыл бұрын
As always, awesome video! Thanks for sharing the knowledge and a new track!!! Love the new editing visuals!!
@alecbrits3 жыл бұрын
Thanks Kevin! :) really enjoying the video editing process, looking forward to trying new things there.
@amagistudio2 жыл бұрын
Amazing song👏! I love my 500R8...this is all I ever wanted. Cranborne team its always on top of the game;)
@alecbrits2 жыл бұрын
Thank you so much! :) it’s such a great box. 👌🏽
@CraigHlavka3 жыл бұрын
you're a very talented guy! Thanks for sharing :) All you videos are inspiring. About the Cranborne, I have had one for a year and the workflow is really fun. It's forced me to plan out a mix, having only 8 tracks to work with. Forces one to make strong decision about what to include in each stem so they mix well. Absolutely love it, it's a recording beast.
@alecbrits3 жыл бұрын
Thanks so much for the response. :) I cannot wait to get further into the different use cases for the R8!!
@CraigHlavka3 жыл бұрын
@@alecbrits Cool! I Thanks for sharing your insights :)
@CraigHlavka3 жыл бұрын
@@alecbrits The workflow is so open ended and flexible, it would be great to see how you choose to use it. I'm a bit torn with it. On the one hand I love the summing. But, sometimes I think it's easier to get a mix in the DAW without using the knobs/mixer. I'm trying to figure out a way to print all the levels I set within the DAW, THEN route those stems for summing in the Cranborne. I haven't found a way yet.
@alecbrits3 жыл бұрын
I think just having the unit set to unity is the easiest way. That way you are using automation within the DAW to push the unit as needed. :) that’s how I use my console, and how I have found recall to be dealt with easiest.
@CraigHlavka3 жыл бұрын
@@alecbrits ah okay, that's a nice tip :) Well you have one vote for a DAW to console work flow video :) Anyway, cheers Alec!
@boblazo1 Жыл бұрын
Alec first Off I think THIS is one of your best songs. I'd love to write with you on something sometime. This is a terrific review and evaluation. I ended up buying one of these units. Please review the NEW Carnaby 500 Harmonic EQ circuit...I'd love to hear what you have to say about those units.
@alecbrits Жыл бұрын
Thank you so much Bob! :) congratulations on your purchase. Sure thing, Carnaby review can be arranged indeed!
@ralphy33932 жыл бұрын
Dude thank you so much! I’m going to be building a home studio soon, and this is crazy helpful! Truly thank you!
@alecbrits2 жыл бұрын
No worries Ralphy! :) glad it was helpful. The guys at Cranborne know what they are doing!
@mothroyale90763 жыл бұрын
Great song to demo what has become my next level kit wish. 👍👍👍
@alecbrits3 жыл бұрын
Thanks!! :) enjoy it when you get it.
@LewisFieldhouse3 жыл бұрын
Love the song man! Your best one yet. The unit sounds awesome!
@alecbrits3 жыл бұрын
Thank you my man!! :D
@mrsonar3656 Жыл бұрын
Awesome work, great video, and it sounds great!
@alecbrits Жыл бұрын
Thanks so much! :)
@andrein24562 жыл бұрын
You could use the Bison From IGS audio and insert your Mastering chain as an insert in the DAW.. just keep the volume knob on the summing mixer at - Infinity. Or take the summing output into your mastering chain and then input it on 7 and 8 line inputs and set them to analog and record them in your DAW as you would track a stereo instrument. also summing knob at - infinity ( in both cases you lose 2 summing channels) but it could work. I think..
@alecbrits2 жыл бұрын
That should work indeed! :) loosing the two channels of summing is a bit of a loss for me as my mix session is grouped into 8 stereo stems, but it is indeed a work around.
@Kharrari3 жыл бұрын
great video, this channel is a winner
@alecbrits3 жыл бұрын
Thank you Khari! :)
@sinewavesstudio54472 жыл бұрын
Great production! most demos you for gear is meh, you my friend went all out to show off the unit. Awesome job.
@alecbrits2 жыл бұрын
Thank you so much for the kind words! :) I try to really use the gear and highlight the tone as much as possible.
@Leele03 жыл бұрын
i just got me one. i cant wait to get this baby!!!!!
@alecbrits3 жыл бұрын
Congratulations on your purchase!! :D
@Leele03 жыл бұрын
@@alecbrits I appreciate it man. Let’s see what this thing can do! 😉🙏🔥
@kayakbandits98942 жыл бұрын
Love the song man. Good stuff.
@alecbrits2 жыл бұрын
Thank you!! :D
@nathanielbrice87253 жыл бұрын
Love your videos! Nice songs! Great gear in your studio too! Love the ATC’s! Can you do a review on them!
@alecbrits3 жыл бұрын
Thank you Nathaniel! :) I would love to do a review on them, but I’m not sure how to show how they sound. It may just have to be a talking and featured kind of video.
@reginaldworthington75582 жыл бұрын
Hey Alec, first time I’ve come across your channel - really well done video and love the laid back vibe you project. Very easy on the senses. Great tune as well so thank you and we’ll be watching for more. Sub’d.
@alecbrits2 жыл бұрын
Thank you so much for the kind words Reginald! :) will be more content coming real soon.
@TwentyMinuteGuitarPlayer3 жыл бұрын
Hey Alec, Great video and great channel here! Thanks for all that you do! I just got a 500R8. I was wondering if you could do a how to video for dummies with it? So like a walk through on how to set it up and how to do basic tracking and earphone monitoring with it? I seem to be getting a bunch of latency or delay when I'm trying to track bass direct! Thanks again for your great channel! God Bless.
@alecbrits3 жыл бұрын
Sure thing! Working on a few videos already!
@TwentyMinuteGuitarPlayer3 жыл бұрын
@@alecbrits oh wow amazing! Cant wait to watch!!
@flacospace4819 Жыл бұрын
Such a great insights and lovely quality music. Wonder to know how the mix is done on Craneborne audio 500r8? is this creating any issues or are you using a mixer with it? Because it appears there is no meter level, the knobs do not look appropriate for mixing, and I can see there is no mute button on channels, which is really sad:(( . What's your thoughts about it as I'm about to decide to go all in on CB500R8 or having a mixer.
@alecbrits Жыл бұрын
Sounds like the issues you have highlighted are solved with a console style workflow. :)
@yumienmichelcorria7372 Жыл бұрын
Great song man!
@alecbrits Жыл бұрын
Thanks so much! :)
@MurnerJoel2 жыл бұрын
Such a great song 🥰
@alecbrits2 жыл бұрын
Thanks Joel! :)
@hauntedbytheliving11752 жыл бұрын
If this song were written & performed by Sting it would be his best fu&@ing song. Amazing.
@alecbrits2 жыл бұрын
Thanks for that INSANELY kind compliment. Always loved listening to sting when I was growing up. :) I’ll keep working on more tunes!
@kevinchurch4649 Жыл бұрын
Thanks for such a great informative review. I have a UAD Apollo Twin MKII. I’m curious if these digital converters sound better in the Cranborne?
@alecbrits Жыл бұрын
The Cranborne conversion is really solid, I personally prefer the tone of them to my Apollos. Especially the DA conversion. :)
@kevinchurch4649 Жыл бұрын
@@alecbrits that what I wanted to know! You are extremely talented. Thanks for taking the time to share your gifts!
@LaurenPassarelli2 жыл бұрын
Super cool info, and great delivery and teaching. Bravo on the great production and song.
@alecbrits2 жыл бұрын
Thanks Lauren! :D
@JornLavoll3 жыл бұрын
It's such a smart ecosystem the cranebornes came up with :)
@alecbrits3 жыл бұрын
It’s so handy! Specially if you are a one person team. :)
@b-music93293 жыл бұрын
Great review! My Aphex USB 500 is similar to this box, but has only 4 slots (so lunchbox format) and no summing mixer. But it too has MIDI I/O, wordclock I/O, USB, etc. But it's not available anymore.
@alecbrits3 жыл бұрын
Thank you so much! :) the Aphex was a good box! Glad that we now have a unit that is so solid and flexible and can be bought.
@b-music93293 жыл бұрын
@@alecbrits Definitely :-) I however wish that they would also do (or have done) a smaller "lunchbox-format" version. I strumbled accross the Cranborne too in my research for a 500 series lunchbox with included converters, but the Cranborne was a bit too large and expensive for my needs. As far as I'm concerned I like it small and portable (since I don't run a commercial studio, just home/project studio use) and I'm fine with four really good different preamps featuring different tone each. My four slots will be populated with the Neve 1073LB, Neve 88RLB, API 512c and SSL Six Channel, which should cover all my project studio preamp needs in a small portable package. Btw, I finally got the U-67 because of your great Neve 1073LB review :-)
@tylerwinter512 Жыл бұрын
Yo! Amazing song!! I almost always hate the song on videos like this. Lol nice work! Decent.
@alecbrits Жыл бұрын
Thank you so much Tyler! :)
@LarryLobo Жыл бұрын
I have a query. In the back panel, Mix Output refers to the summed mixed right? So is it possible to route that summed mix through outboard gear and then back in the DAW, probably through DAW 2 INPUT? I want to eliminate the need to do multiple ADDA round trips for stem mastering purpose. Please suggest! On the verge of purchasing this unit and can’t find a single tutorial regarding this hack.
@LarryLobo Жыл бұрын
I have the EC2 & N22H for the master bus so probably we can use CAST i/o for this?
@alecbrits Жыл бұрын
Hey Larry, I think it’s best to get in touch with Cranborne to discuss this. :)
@LarryLobo Жыл бұрын
@@alecbrits Thanks.
@ProjectBeats_2 жыл бұрын
Brooo amazing setup! Thanks for the vid. Really helpful. 🙏🏽 What is that console you have?
@alecbrits2 жыл бұрын
Thank you! :) it’s an Audient ASP4816, I have done a review for it on my channel too.
@JewelzFin Жыл бұрын
If the R8 modules come before the A/D stage; couldn't you just put your mastering chain in the R8 module spaces and any other mastering plugins on the DAW Master track, and then print? I'm not the most knowledgable producer. But it seems like something I would try. Would putting the master chain on channels 9 and 10 as a master insert make it sound different (if it were possible, of course)? I'm asking because I am planning on buying one and want to know if getting the 500 Series SSL Bus Compressor is worth it. Or if I should get the rack version and put the R8 master outs (9 and 10) through the SSL rack version Bus Compressor and then into a separate interface into the computer, like you said.
@alecbrits Жыл бұрын
Hey Julian! :) That would work if you don’t want to use the summing mixer that is built into the unit itself. The only reason why a hypothetical 9-10 channel would be great is to be able to take the summing mixer output and have it go into your analog chain, then back into the unit. If you are looking to have the ability to pop analog inserts into your projects, then using the unit without the summing mixer is totally possible. If you are looking to use the summing mixer with the appropriate stereo processing per stereo stem, then that’s possible. If you want to add ANALOG stereo buss compression/EQ to the summing mixer outputs, then you will either need to come out of the summing mixer outputs, into another set of converters. Or take the outputs of the summing mixer into a pair of channels on the unit, without 500 units in with the line input switch enabled. Hope this helps. :)
@lieuweroonder217 Жыл бұрын
Hi alec! Awesome video one again! I have a question you might be able to help me with. I expect my 500r8 to arrive on monday! I want to use it as my monitoring (main) interface and hook up my apollo 8 from 2015 via adat. Now I was wondering how to monitor those adat channels through the 500r8 and how to control those input levels. Or do I still need the apollo software to make that work? Thank you for your help😊
@alecbrits Жыл бұрын
Hey Lieuwe! Sadly I’m not too sure how best to control the Apollo/500r8. I would assume you have to still use the software on the Apollos, but again, I’m not too sure.
@lieuweroonder217 Жыл бұрын
@@alecbrits Thanks for responding Alec. I'll send a message to the team at Cranborne audio to see if they can help me out. Cheers!
@BloodyCactus2 жыл бұрын
and after all this time, SPDIF not implemented, still doesnt work (not in the firmware) and the clock dipswitches are still not implemented... maybe in another year all features might be supported! otherwise, this might be a great product. buyer beware tho...
@alecbrits2 жыл бұрын
Thanks for the insight! :)
@AndrewCCM2 жыл бұрын
Agree. I really could use those SPDIF ports. About to order either both the 500R8 and 500ADAT or perhaps a combination of the 500R8 and a different expander unit. I already have a 500 chassis and 3 of them is just a bit much and will tempt me to spend even more money trying to fill up the holes!
@jovantrendmaker47229 ай бұрын
How could you integrate this in to 8 channel mixer? I know this is mixer in a way but what if you have quality 8 or 16 channwl mixer?
@alecbrits9 ай бұрын
Perhaps a normal 500 series rack is the better way for you?
@filipeventura2729 Жыл бұрын
I have maybe a silly doubt some one hopefully can help with. Lets assume half of those slots are eq or dynamics modules, do i then loose the intrument inputs on those channels or can they be used for both line input and 500 series silmutaneously?
@alecbrits Жыл бұрын
As far as I’m aware, once there is a unit inside the rack will default to it being used. The little switches that allow you to select which inputs are to be used are on the inside of the rack.
@roandenn933 Жыл бұрын
What a lovely channel!! Seeing that this does not have a stereo mix bus insert, is there a practical simple way to make that process happen if you were to purchase this system? Thank you 🙏 Regards~
@alecbrits Жыл бұрын
Thanks Roan! As stated in the video, if you were to have a second converter, that could work, or if you had an ADAT converter, you could take the mix outputs, then fire them through your buss processing and pop them into the conversion connected via ADAT. :)
@roandenn933 Жыл бұрын
Alec, thank You 🙏
@Ricksterpt2 жыл бұрын
Question I really love the sound of my AuroraLynx N 16in 16out DAC Just wondering how does it compare with the Cranborne sound. Thanks.
@alecbrits2 жыл бұрын
Hey Rick! :) I’ve not tried the Lynx N yet. So I can’t honestly say. What I can say is that I really enjoy both the AD and DA on the Cranborne stuff. :)
@zanem90222 жыл бұрын
Does r8 interface records straight to the daw? Or do they have their own mixer app, kinda like rme total mix which sometimes is complicated for me, i just want to start recording without much learning curve
@alecbrits2 жыл бұрын
There is no mixer app. :) just gotta change one or two setting in you DAW and you computer and you are ready to go. All the functionality you need is on the mixer underneath the 500 series slots.
@clipz12 жыл бұрын
good review as you said the unti is all those things and more but do you need the things you mentioned if you have a interface a summing mixer ect already ive seen one bad review all other have been good but as you also mentioned they sent you the item as they did others overall im stuck on what to get but great vid
@alecbrits2 жыл бұрын
Thanks AV! :) I think if you have everything you want, then you don’t need this piece of equipment. But if you are someone who is looking to upgrade from just an interface, or someone who wants to scale down from a console/outboard workflow, then this is a pretty wicked choice.
@clipz12 жыл бұрын
@@alecbrits hey man hope your good yeah im kinda looking to upgrade so i mainly do just use the pc but i got some synths and i also got some real good old school delays reverbs ect so i would like to have it all flowing the best way possible and i do need an upgrade ive got an saffire 6 and dont mind using somthing else now i was also looking at the big six ssl and the apogee symphany desktop so to be honest the more i been looking the more i just need to do more research and take my time
@alecbrits2 жыл бұрын
Absolutely! Research is key with these things really. :)
@chriscrane85282 жыл бұрын
Hello. Can I use the 500R8 only as adat? I mean, without using de interface or connecting the usb cable. I want to expand my apollo twin interface and still using it as the brain, but also i want the flexibility of the 500r8 because i can take it everywhere without using another interface.
@alecbrits2 жыл бұрын
Hi Chris! Cranborne make a 500ADAT only version of the rack just for the use that you are looking for. :)
@anidea564614 күн бұрын
Maybe this is a stupid question but I have an Apollo x4 and am thinking of getting analog gear. I was looking at the 500adat because I want to continue to use my Apollo as an interface to use some of the plugins but I like that the 500r8 can be expanded to potentially have 16 slots with the 500adat. My question is can I use the 500r8 without the interface?
@alecbrits9 күн бұрын
It can be a standard 500 series rack when not in use as an ADAT device. :)
@anidea56468 күн бұрын
@@alecbrits awesome!! Thanks 🙏
@JakeWaggoner2 жыл бұрын
subbed!!!
@alecbrits2 жыл бұрын
Thank you so much! :D
@felipecastro57523 жыл бұрын
Greatest vídeo, Sir Alec! Do you get on your álbum? I like yours songs. Lord bless you and family.
@alecbrits3 жыл бұрын
Thank you Felipe!! :) I’ll be working on my album later this year.
@greyaltaer8788 Жыл бұрын
more saffa brits pls thx
@alecbrits Жыл бұрын
😂😂
@atacamabeatsindierecording84062 жыл бұрын
Hi, i did no get right the headphone outputs. How can i work at night without disturbing my wife if when i turn up the headphone output, the monitors, going to sound too. How can i do that, to mute the monitors while i am using the headphone ?
@alecbrits2 жыл бұрын
All you have to do is hit the mute button on the unit. That mutes the speakers, not the headphones.
@atacamabeatsindierecording84062 жыл бұрын
Thanks a lot
@mattbang2802 жыл бұрын
How do you feel about the connectivity only being usb 2? That’s my biggest concern with this. I still use an apogee duet 2 with usb 2, but finding that it doesn’t provide enough buffer size when my session gets heavy. I don’t understand why they didn’t use a faster connection, especially for something that came out in last two years.
@alecbrits2 жыл бұрын
It felt pretty good to me, specially with the fact that I can monitor from the device itself with the onboard mixer. I generally work at 96khz, so latency is less of an issue in general. That was just my experience, if you have had any interesting experiences with one of the Cranborne units, then please feel free to share. :)
@mattbang10722 жыл бұрын
@@alecbrits Interesting. I would think you would have more latency concern running at 96k as opposed to 48k. Latency is less concern as you said, there's onboard mixer. More concerned with being able to set a large buffer size for a heavy mix session, but also faster connection for overdubs would be good.
@alecbrits2 жыл бұрын
@@mattbang1072 I think buffer size limits are determined by the DAW that you use. :)
@mattbang2802 жыл бұрын
@@alecbrits I think yes and no. I use Pro Tools and Ableton. They do offer different buffer size limits, but also when I have a faster connection interface, the buffer size limit changes. For instance if I have my usb interface connected, I can go up to 1024 in PT. If I have a thunderbolt connection, I can go higher.
@alecbrits2 жыл бұрын
@@mattbang280 that’s very interesting! I guess I’ve been on thunderbolt interfaces for quite some time, so it’s not really something I’ve noticed. Thanks for the feedback!
@cncbmusic1512 жыл бұрын
But hopes the conversion compare to other high end converters? Like burl or lynx
@cncbmusic1512 жыл бұрын
How does…
@alecbrits2 жыл бұрын
It’s really solid conversation. Hard to know how they compare to the burl or the lynx as I have not tried them. But compared to the the Apollo’s I’d say they are even.
@lskharrison45063 жыл бұрын
Can I have full track of the song??
@alecbrits3 жыл бұрын
It’s not finished yet! :)
@lskharrison45063 жыл бұрын
@@alecbrits can't wait for the full song!!!
@zer0tzer02 жыл бұрын
I just want to know if it's quiet. What's the noise floor like?
@alecbrits2 жыл бұрын
Really good! :)
@amalgami4 ай бұрын
how would u rate the converters on this unit. Specially D to A? Do they compare to the likes of dangerous etc? thanks
@alecbrits9 күн бұрын
I love the sound of the unit. Wide open and not as harsh as the UAD DA, at least that’s to my ears. :)
@amalgami9 күн бұрын
@@alecbrits Thanks. I went for dangerous music source monitor controller. Amazing DA for the price.
@jasperdany2 жыл бұрын
Hi Alec. Do you have Spotify?
@alecbrits2 жыл бұрын
Hey Jasper, I don’t have any of my songs up on Spotify just yet. They are all being finished off over the course of this year. :)
@ChandTechnical3 жыл бұрын
Word higest end gears, so maximum can't afford 🤣🤣
@alecbrits3 жыл бұрын
It’s a series of small steps to get these pieces I think. :)
@ChandTechnical3 жыл бұрын
@@alecbrits still u r lucky to have these👍
@ChandTechnical3 жыл бұрын
@@alecbrits anyone can't Comment against these gears and its output.... These are ultimate standards👍👍👍
@Polydea Жыл бұрын
how much did they pay you for this? lol
@alecbrits Жыл бұрын
Hahaha, there was no financial contribution on this! :)
@GokulChandCreation3 жыл бұрын
Not impressed, not penetrating sound
@alecbrits3 жыл бұрын
Thanks for the feedback. :)
@GokulChandCreation3 жыл бұрын
@@alecbrits don't mind, from great gears i expect Great sounding tracks🙏... U can also
@RIP_Milhouse2 жыл бұрын
@@GokulChandCreation Might you save yourself a few thousand quid on high end equipment by investing in having your ears professionally cleaned out? Maybe you live next door to an airport runway? 🤣