Crankin' Out Crafts ep472 Make Your Own Wire Components

[@luvspar]

THANK YOU FOR SPEAKING SO SLOWLY AND CLEARLY, LOVE THIS VIDEO!

[@josephseguinii9927]

Thank You Sister you are helping us all and remember reap what you sow, so GOD Bless you &Thank You Praise the the Lord

[@dianawoods6991]

Thanks you saved me time on loop earrings 😉

[@anaamato9809]

Can you add a list of materials for someone that is just starting out ?

[@theartisancompany]

I need to purchase those tools. TFS!

[@robynmoodley4223]

Beautiful

[@cathysmith9026]

Thank you. I used to shop in Ben Franklin store as a little girl.

[@melissabailey566]

I love your techniques, explanation descriptions- You don't go to fast. Just right. Thanks. Melissa

[@bfslocations]

Mahalo and thanks for watching

[@noellesworld317]

5:19 hello! Thank you for this video! I made some today and I love them! Do you have a tutorial for your ring on your pointer finger? It’s beautiful!!

[@missmandalaa]

Where I will get those tools? Can you send me link pls

[@ipriyankarana4278]

Loved these quiky earings just wow

[@vickiewolfe768]

How do you hook the ends together??

[@janelunn1068]

Aloha from Australia. Do you have a tutorial for your gorgeous silver bangles. Are they a made using soldered/fused technique. I really want to learn how to make them. Have a sunshiny day in Hawaii Cheers, Jane

[@kimjones6412]

Do you have any videos on how to make the ring your wearing with the gunmetal pearl and any of your bracelets you’re wearing? I’m definitely going to make the earrings for my mom. She recently lost a red hoop earring and I want to make her some red earrings. Thank you so much for sharing your knowledge with us.

[@bfslocations]

Aloha Kim, we do not currently have a video on the ring Lynn is wearing. We will keep that in mind for future episodes. Thank you for watching. Have fun creating earrings for your mom! (side note, I have a cousin Kim Jones :) made me smile when I saw your name and comment)

[@zenamcfarlandgentris6375]

What is your block sitting on, its cute?

[@raquelreyes8573]

I am new at doing earrings but you explain so well and slow which for me its great i already subscribed. to your channel in BFS Location can i see more tutorial thank you have bless day

[@deepdiver849]

Can you hammer craft wire? I heard you couldn't and it would damage the coating?

[@goodnews7219]

What kind of wire did you use and where to buy it?

[@curatedthrucreativity4701]

Love it! Do you use sterling or silver filled wire? Half hard? I assume if hammered you can't use plated.

[@rawiamuktar9161]

You are amazingg

[@amiraisac8595]

Hello Shall you tell me the material or the wire name that used pls

[@Bonstergirl1]

I use 20 wth all my components and its not a heavy wire and its sterdy yet easy enough to manipulate..good for earring wires also..not to big

[@susanpundy551]

HI Sarah! I just starting to make my own components. Do you use the hammer/block for earring components? I was curious is flattened 20 gauge might be too big for earring components. Thanks!!!

[@randommusings4957]

Hi! Thank you for the video. Which chasing hammer do you use?

[@rubelliagaming213]

Hello what kind of wire did you use? dead soft? half hard? craft wire? Thanks

[@bfslocations]

The wire I used for the video was 18 gauge aluminum, but it was strictly for display purposes for viewers to be able to clearly see the process itself. I usually recommend 22 gauge for large shells and 24-26 for smaller shells. Hope this helps!

[@rubelliagaming213]

@@bfslocations what brand of wire would you recommend? I've heard of zebra wire but Idk anything about it. I've also heard of artistic craft wire and beadalon.

[@miaromeo5522]

Good video! What is the name of the tool you used to straighten the wire??

[@donnapoderosa]

hi is it possible for you to send me a full list of the tools needed to make these earrings and where to buy? Is there a kit or specific website you prefer ?. I loved your video it was so easy to follow. Thank You

[@bfslocations]

Aloha! Here is a list of supplies 20-21 gauge wire stainless steel ruler Nylon jaw pliers (to straighten wire) Bent nose pliers 6 step pliers wire cuter manual wire rounder Rock tumbler or rubber mallet with bench block wrap n tap

[@Bonstergirl1]

you can buy all the tools on ebay and all you'll need is nearly always on ebay

[@chrisgard3]

Could you do close up of your workings

[@laurawoods9257]

Thank you for sharing this. I have found more than one size of wrap & tap pliers on line. What size are you using? The small one I found is 5/7/10 mm & the larger is 13/16/20 (1/2", 5/8", 3/4"). Thank you!

[@bfslocations]

We're using the larger wrap & tap (13,16,20) for this particular project.

[@Bonstergirl1]

choose your own size other wise its like copying their stuff and not being inventive with yours..

[@andreawellman4461]

@@Bonstergirl1 thats an unfair statement...thats how people learn, and what tutorials are designed for.

[@karmenkrafts496]

Thank You for the inspiration and ideas i really enjoyed this video and a couple of others, have a wonderful day and keep shining! Huggs :)

[@bfslocations]

Mahalo and thank you for watching!

[@Annettesmusic]

WOW! Earrings in 5 minutes. Love them! I just made 2 pairs...one pair with silver wire and one pair with gold wire. Thank you so much. A question...you said you showed how to make ear wires earlier. Did I miss that in the video or, is there another video where you showed this?

[@bfslocations]

Episode 471 :)

[@Annettesmusic]

Thanks for getting back to me with the info. Much appreciated. I'm watching the video now.

[@RosaButton]

Hi, nice video. What kind of wire did you use?

[@maryannedozois2097]

You need to have a closer picture of your material. I couldn’t tell what you were doing

[@Khadine1975]

Hello: I love your video. I want to start making jewelry and your video have got me more interested in this kind of art. I am looking for some material in internet and I noticed there are different colors of wires and my question is: If I use the hammer on a color wire, would it lose the color too much or would it give just a nice effect showing the silver that I guess is behind the color. What have you noticed according to your experience?

[@bfslocations]

Aloha! Great question.....If the metal is sterling silver or gold filled it should keep the color, IF IT IS PLATED......AND YOU HAMMER IT, YOU WILL LOOSE THE COLOR. Hope this helps. Thank you for watching!

[@RosaButton]

Where is your online store so that I can purchase your items?

[@dawngamez4730]

what was the tool you wer using to straighten out the wire

[@rubelliagaming213]

Nylon jaw pliers =)

[@huynhcharlie]

Hi, would you recommend eurotool or beadsmith for wrap n tap pliers?

[@bfslocations]

Aloha Dee! We sell Bead Smith and really are pleased with the results :)

[@Bonstergirl1]

I recommend ebay myself.. a speciality place is always over priced i fine..

[@Maisysmumma]

Please watch this and see if you can see.....😔

[@missmandalaa]

Hey

[@barriereynolds6447]

Kk