How it Works: Chain Hoist

[@mayumi1603]

Simple and straight to the point. Great job!!

[@lenwalker7393]

Thank you for this explanation. A goos start for someone with no experience.

[@westvalley411]

Short, sweet, clear and no BS. Thumbs up!!

[@manandholakiya3981]

This is the beauty of Mechanical Engineering....

[@a1930ford]

What is the "most common cause/reason" that a chain will jam or stick when lifting or lowering a load with this type of chain hoist? We spent a lot of time today in playing about trying to get a new chain hoist to allow us to lower it and sometimes to raise it. I didn't pull the cover off to expose anything, but I am wondering if the chains have to be in a straight vertical line or what? Any thoughts about that? Our chain hoist is just like the one you show in your video, but it is a 2 ton one with no handle to work it. Is it possibly a pawl inside that is causing the issue?

[@davehoward2791]

I got the 1-ton chain hoist from Harbor Freight last year and love it. I mainly use it to lift my riding mower vertical to service the mower deck, change blades, etc. Works like a champ. Interesting to see how they work inside, thanks for a great video! 👍

[@BreakingBarriers2DIY]

Quick helpful and just what I needed to know. Whew a KZbin sniper!

[@xicath]

is chain hoist better than electric hoist? i need tools for lifting stuff under 200kg, but still cannot decide chain hoist or electric hoist, disadvatage or advantage the two of them, thank you very much

[@1114javito]

Hello I have a hoist that when it raises the load at half height, is stopped. The chain keeps turning but the load does not go up anymore. Why?

[@shonith91]

Clutch that disengages the rachet is what I wanted to know.

[@anthonygiordano6265]

Hello, Wondering if you could help me out. Had a question on a test that asked whats the weakest component in the chain hoist. The upper hook, the lever, the chain or the load hook? thanks

[@clydestamp6970]

Excellent! Big help.

[@metalrooves3651]

i have a chain hoist patented 1878 that tell s me a little bout its age BUT ONLY because developements were so fast ,change meant they quit making early hoists...IT MUST BE a worm gear hoist BC it will not coast but a worm gear must be rolled backwards to lower it.....an early,simple braking mechanism.....am I right..just guessing

[@scottcheffey2571]

His two favorite things - chain hoists and ligers

[@chargrilledcharlie]

From any good tool store or auto spares shop, even ebay. I bought mine from an auto store here in Australia for 60 bucks, which has a lifting capacity of 500KGs.

[@faisalfaixal2376]

can we make a shutter with same mechanism

[@Hear2Help]

how do you release the brake mechanism?

[@johnlister1928]

Semi detailed.

[@eddiegaspard1088]

I sure would like to own one of them WOW!!!!!!!!!!!!!!!!!!!

[@albertlopez6620]

Esto mas de uno lo usa para ahorcarse .. Este aparato tecnicamente atrae a los que se quieren ahorcar... Despues de decadas puedes encontrar cuerpos descompuestos debajo esos aparatos en muchos talleres y graneros donde su dueño o alguien que sabia que estaba ese aparato se ahorco Incluso dos o tres cuerpo si alguien llega y esta otro colgado lo baja y lo deja a un lado para ahorcarse el .. A sin el otro se descompone al lado y el colgado .. O repetirse eso baria veces ...

[@rinse3x]

sick thank you

[@faisalfaixal2376]

damn 15 yeara ago brother

[@liquidpaint2648]

That's informational

[@zoejay]

Your chain needs quite bit of TLC.

[@Renew55574]

Chain black and white

[@Hear2Help]

mine will not pull backwards, it is a Torin and it is NOT in the instructions

[@mirceacostan5402]

Caracteristici , preț ?

[@KomilEshqulov-db9pc]

Бир тонналиги борми нархи канчадан

[@baronlocal8569]

Cabestanele cu lant sunt ieftine mai ales in talciocuri , mai durabile decat troliu capestan manual cu cablu de otel , pot fi actionate din orice directie din camera , nu necesita un perete pe care sa se prinda o manivela .. Merita investit in asa ceva si in cateva suruburi de bagat in tavan si legat de pat la cei care se scoala greu din pat , intarzie la doctor , amana sa mearga sa plateasca impozite etc .. Sau merita cumparat tije filetate , piulite , saibe pt bagat in pereti laterali , sau in partea de sus la tocuile usilor si niste lanturi sau cabluri ieftine legate intre acestea ... E pacat ca cabestane manuale sa stea nefolosite in garaje , beciuri , sa nu fie puse la lucru . Intrun film cineva isi ridica bagajele grele dela piata - sacose cu pepeni folosind un troliu electric .. Par un reductor silentios si pt un motor de bicicleta , are raport de reducere parca 19/ 1 , greu de gasit un reductor cu asemenea raport .. Dar totusi la turatii mari sar putea sa faca mult zgomot .. !?

[@babaramgudve8054]

किंमत किती आहे

[@localbroadcast]

cool vid bro thanks for showin

[@sameerinam4689]

localbroadcas

[@bavetta]

Ya, you're right - whoops.

[@my-crazy-fantastic-fanatic]

Can we use a chain hoist to tow a truck or other heavy objects horizontally?

[@MsSomeonenew]

Yes you can, but it's a real pain in the ass when gravity isn't holding it all in place.

[@my-crazy-fantastic-fanatic]

Thanks for the reply!!

[@lisaludwig1550]

Use a Griphoist. They can lift up to 40,000 lbs

[@bhagirathsingh4365]

Hello sir Chen block Koramangala injan per fit kese kare

[@mervillevalenzuela4011]

I need5 tons and how much

[@bveeranji464]

Cost of this

[@jesusfreakster101]

150 # of ACT popcorn… do tell please.

[@asepheriheri713]

thanks

[@ayshakasif8495]

chani ka brain kai melka l am live in lndan marabad

[@arshadinamdar4034]

This technology can be used to get them out of unproven crude oil. 🤔

[@clerdisonbarreto8740]

Gostei do vídeo

[@christopher-bj8de]

Why the ear muffs, in case it all comes crashing down? Useful video though, ta

[@OlliNiemitalo]

The thinner chain rattling and the ratchet are quite loud.

[@fudogchomp]

Cool!!

[@SALEM.ALTAMiiMii-KSA]

👍👍👍👍👍👍👍👍 ✋

[@中国链条]

链条需要吗

[@dalihoist9855]

how can i contact you?

[@pepebest666]

I want to lift a car with my hands

[@get-the-lead-out.4593]

pepe beast and so 5 years later, have you done it yet ;o)

[@PradeepKumar-uv5pi]

Aap ka namwar chaye

[@aasifasif8838]

A

[@joaouezadasilveira1794]

.

[@HushE2AskolE]

Not clear it should 3d animation

[@4rnorthwest]

All the fat cut off this video! Simple to the point. Well done. Thank you.

[@RobertSmith-us5gx]

This classic hoist is very safe since it uses redundant system as pointed out on 1:08. The inventor is a genius - out from this world.

[@westvalley411]

Where have you gone Joe DeMaggio? No new posts in long time!!

[@anubis520]

old video so this comment is slightly worthless but it is off by 45 degrees at 1:03

[@subzero3056]

Three years have passed

[@dtrrtd774]

Looks like that requires so little force you could drive it with a cordless drill if only there were a shank protruding from that drive to couple it..

[@arumugamramachandran9530]

But it would consume a lot of energy and time

[@debanjandas4258]

It Making process please🙏🙏🙏

[@nickalbert4467]

The gear on the other side is 45 degrees offset

[@edinfific2576]

I got a cheap Chinese one, and it gets stuck even without any load.

[@chargrilledcharlie]

Fantastic video. Chain hoists are cheap and very strong lifting tools. I use one for pulling out heavy motors and gearboxes and it works a treat. Keep making these great videos.

[@harishgopi046046]

E65ir

[@harishgopi046046]

Rturjff1

[@kosjam]

@1:07, the guy said 990 degrees offset, i was wondering if its actually 45 degrees offset. because 4 teeth on each gear means teeth are 90 degrees apart already. to ensure that 1 tooth is engaged at all times, it should be 45 degrees. Please correct me if i am wrong. thanks

[@red_ford23]

Your correct. A plus or cross (+) shape on one and an (x) at the other is actually 45° rotation

[@حسامحميد-ق3ي]

not clear explanation need to open the gearbox 😡

[@red_ford23]

Maybe ya don't

[@ronaldschronce4875]

If yours will lift but not release, chances are the clutch friction disk are stuck to their mating plate. Sometimes a hard taping will loosen. If not take apart the clutch and put back.

[@hanglengoc8064]

Exactly what I needed!

[@Ham549]

Yes but how does that clutch work that is the $6,000,000 question that everyone avoids.

[@carmelpule6954]

There is a threaded part on the input shaft which when turned to raise the load , will cause a gear wheel to move axially and a this axially moved gear wheel on the input shaft will cause the friction clutch to push against the ratchet wheel and the pawl will click to raise the load. When the input shaft is turned the other way to lower the load, the thread on it will lift the threaded gear through an axial movement, this will lift the friction clutch to produce less friction causing the load to lower itself but this lowering will axially move a gear wheel to push the clutch back to press against the ratchet wheel. The secret is in the threaded part on the input shaft which causes an axial movement on the intermediate gear wheel which will press of lift the friction plate on to the ratchet wheel. I tired to make is simple but there are good diagrams to supplement my explanation on the mechanical brake in a hoist.

[@randyrodriguez9320]

vote for Pedro🙋🙋

[@wilderobando3605]

Lastima que no te entiendo

[@sagar11222]

Low force high travel input to low travel high force output via 2 reductions. .

[@omeralsheheme9800]

👍🏻👍🏻👍🏻😘😍

[@Omardottcom]

That’s amazing! Thank you for making this video.

[@kunganuanuchannel6657]

it can be use. in Arm wrestling training? Try to pull your arm.

[@Venom-nk8nd]

🇵🇬.,.,,.

[@idetubeid]

Nice 👍

[@barb5260]

What is the load capacity for a chain hoist like this? Would it be possible to rig a platform to make an elevator? The reason I'm asking is my basement entry is not long enough to have a stairway that would be comfortable to walk down and still be contained so the area can be closed evenly with the existing wall in the basement.

[@flfl186]

only "amazing" for US guys...

[@RobertSmith-us5gx]

Winches aren't safe for lifting since it doesn't have a redundant system and doesn't prevent free fall.

[@BladeXDNumeroUno]

By winches you mean lever hoists? Of course they prevent free fall, I've tested over 1000 pull lifts and never had a load drop on neutral as the brake activates when weight is applied. Chain blocks are actually more prone to dropping a load partly due to the bad design on some models, some of them don't have a self locking nut to hold the main pin which is on the gear side, which means a decent knock to the side of the chainblock could completely knock the top hook out of the block if the nut has came off and I've saw quite a few that have.

[@sampurvis504]

BladeXD NumeroUno . the majority of manufacturers do not fasten the top hook load pin in at all, instead they rely on contoured cases to hold the pin in. to be honest a top hook load pin should never fall out as the force is transmitted vertically. even with a big knock the load pin would not fall out under load at all. and as far as redundant systems are concerned all the block my company uses ( we are a lifting equipment specialist btw) are twin pawl design meaning if one of the pawls for the ratchet fails the other is still there as a backup

[@roctave]

hi, can this be installed horizontal?

[@wallofstar]

how to release it or bring it down? when you lift it up, the ratchet restrict one rotation direction....

[@pnq8787]

Does anyone know why they stopped making differential hoists (chainfalls) and replaced them with these? This looks much more expensive to produce.

[@MsSomeonenew]

Probably fell out of favor since chain hoists get a much better power range with that gearbox, and they don't need a gigantic pulley on the working end to achieve that.

[@yusufakonakonyusuf575]

বাংলাদেশী পেরাজ

[@jasperedwards3341]

im having a rsj beam with chain hoist making it this week

[@bizobloka8872]

@Crazy Builders: Hey ma man tell me what's heaviest mass can these hoists lift & how much force is required to lift them? Thnx 4 ur mechanical tech... totally dig it!!

[@bavettabuilds]

You can get them in all sizes, here are some examples: www.harborfreight.com/catalogsearch/result?q=hoist Also check northerntool.com The force to lift anything is very small. The hardest thing is to find something to hang the hoist from that can also handle that load. They sell some pretty cool Gantry Cranes on northerntool.com that you can use to connect the hoist to, so check those out but they are pretty expensive.

[@hayel2015]

Fantastic work man 😘 😘 😘

[@branchingdowntotheroots7505]

Good stuff

[@jonstephenson459]

Lots of popcorn

[@pushpendrasinghpushpendras7991]

sir iski kya price he

[@bhagirathsingh4365]

Hello

[@abouammaraboufatima9225]

hi thank you for all video

[@sergioramio]

sweet bro

[@phillipstai7204]

Simple, straightforward. Perfect explanation, sir.

[@smfeather]

Cool!

[@handyrandy111]

without even watching the video i'd say he's saying "KEEP YOUR GOD DAMN THINGERS POUT OF HERE!!!!!" LOL

[@nutcannon]

Love this guy

[@ChrisSmith-ux5mf]

The ratchet keeps the load from backdragging the hand wheel, OK. When you go into the lowering direction what keeps it from dropping the load? I know there are friction plates in there but how do they work?

[@hollynagy8078]

No you cant sir. Nice try though

[@reedstemen]

What is the point of this comment? Doesn’t reference anything in this video.

[@kranthi356]

Is there possibility of brake fail and falling drop of the load which we raised/pulled up?

[@michaellynch9862]

Kranthi Kumar no it’s a Weston type mechanical brake.