Creality Sonic Pad, Watch Before You Buy!!!

[@aaronfox5808]

I would like to see as many videos as possible dealing with Sonic pad. Your vid. is straight forward and Thank you for that.

[@z-made]

That's great to hear!! especially considering i'm coming out with a tutorial on pressure advance today or tomorrow 😊

[@z-made]

I just put out a video on pressure advance, on the sonic pad, check it out😊

[@ronmerkus5941]

Well, I will be picking this up. Thanks!!

[@z-made]

Hey Ron, Thanks for the comment, i wish you luck 😊

[@emmanouilfilippou4623]

I love the mount you designed!!! nice!

[@z-made]

Hey Emmanouil! I'm so happy you liked it! thank you so much for the kind comment

[@thenextlayer]

Excellent video, I'm playing with the Sonic Pad too, and I've been impressed (once I finally got it going on one of my printers that wasn't expressly supported)

[@z-made]

thanks, man, much appreciated😃

[@JustinAlexander1976]

I had a total nightmare with my sonic. Besides shipping delays, if you try to add two printers of the same type it fails. (because printers can't have the same name, and the name is generated from the type). Then the accelleromter won't work in the interface (it does work from the console). Then, for reasons of my own stupidity, my mainboard shorted out, and trying to switch to a BTT SKR Mini (the most popular upgrade board for Creality) was unsupported (you need to manually compile and upload klipper to the board, not hard, just annoying). Or... I'm just currsed to run into every bug possible.

[@stephenjeppesen933]

@@JustinAlexander1976 Thank You Justin for the info. Answers my questions as to which way to go with my Ender 5 Pro I just attempted to update the board to Creality's 4.2.7 and nothing moves afterwards. Sounds like I got to adjust some wiring/pins somewhere or just buy the SKR Mini and throw klipper instead on it since I'd have to anyway. And it also solves what to do about my two CR-10S's that I had hoped to setup on the Sonic Pad. May just end up getting three new boards for all of them.

[@JustinAlexander1976]

@@stephenjeppesen933 I installed the SKR Mini E3 V3.. amazing board, increadible deal for the money, but.. I tore off the USB Port (i'm having a fun week). Be very gentle with the USB, from what I've seen online it's not uncomon. (and I'm still ordering a new one whlie I try to re-solder the port)

[@stephenjeppesen933]

@@JustinAlexander1976 hey, if that is the case stop sharing your mojo! You know the hot melt Creality uses on every single connection even the power ones which surprises me considering the mechanical aspects of those, I ended up ripping 4 of the white plugs completely off the old E5 Pro board. Threw them out already so hopefully I haven't also thrown out a pin I wasn't supposed to! Still going to go the BTT SKR Mini route for the three printers though. Just may have some wiring repair to do on the E5 Pro.

[@leemaxwell5035]

I bought the Sonic Pad to replace a dead Pi running OctoPrint. Considering the cost of a Pi right now it made more sense to me to get the Sonic Pad. The first printer (E3 Pro) setup went pretty smooth, just had to figure out the settings for the Sprite Pro extruder. So far I'm liking it. Even without any tuning it's printing faster than before. My Ender 6 will be next.

[@z-made]

That's awesome, I'm very happy to hear its working out well for you, I'm interested to know how it works out with the ender 6 let us know 😊

[@voidwalk1116]

Thank you. I was debating buying this or using a Pi that was just sitting in a corner doing nothing. Now I am placing my order.

[@Roadshopaudio]

I agree with the mounting issue. That is an awesome design you made.

[@z-made]

Hey Road Shop! thank you for your kind comment, I appreciate you checking out my design, and I'm happy I was able to provide you with some value, I hope to see you back on the channel in the future

[@tzoody]

Nice video, helps a lot man thanks😀

[@z-made]

Glad to hear it!

[@davidnussbaum2897]

Excellent presentation of a very useful product, describing basic information for potential buyers, with an honest balance of pros & cons. New to KZbin? Who'd have known?

[@DawidhabdArup_N7]

Hey man, its really nice for you to share your experience using Ender-3 S1 Pro with us. I believe, Our World is a Shared Experience. Now the bit I want to ask you a favour. I having serious issues printing with my E-3 S1 Pro. First one came, which I had to send it back to Creality so they swap me my present printer. It started Ok, then back to square one. As myself being disabled, I keep finding hard to use the Stock screen that comes with it, so I also bought the Sonic Pad from Creality. After a few hiccups, I managed to make it work. Then all back to square one (x2) again. My models becoming out of shape, coming off even I use Glue Sticks as a precaution. So, I went through every single checks, tighten up all the screws (I found some came loose), reset to factory setting, but cannot win. I Levelled/Re-Levelled the Bed, but when it comes to set up the Probe the Extruder get stuck to the bed and keep pushing down as well as loud noise. I hope I managed to explain my problem, so I will be extremely obliged if you could advice me to resolve this issue. Remember, *_Life_* is *_Short_* , so *_Live Long_* and *_Prosper_* ...🖖… Have a good Christmas and a very Happy New Year'2024. Take care matey!!!

[@trisacinnamon5852]

I have a ender 3 neo- had to set it up with the ender 3 v2 neo for it to work. I also had to change some of the printer.cfg files. Now my print is horrible. It is very thin when it prints. It is not very sturdy. I am using pla+ and have my bed set at 65 and extruder at 215. I have had multiple collapses with larger prints. And when I went to try to get the sonic pad off my printer, the sd card that came with the printer is corrupt, and I can't go back to my original printer screen. I want to use my sonic pad because of the ease of getting to all the options, but I don't know what to do. Can you help? Is there a setting under the printer.cfg that I need to look at? Do I need to make changes to my Ultimaker slicer? I am so frustrated......

[@z-made]

let me do some research and get back to you

[@Valdarious]

I use klipper on a pi so this video watch for me was for a friend but what I am most interested in is that camera mount you did on your old screen location. Was this something you did yourself or was it something you found and printed?

[@z-made]

that camera mount was a project I did, its a camera mount for the police body cam from getach, which I use at work, I printed it using carbon fiber petg and it connects to MOLLE, I sold it to a bunch of guys at work, thanks for asking😊

[@damionchrist]

How did you make your Cura interface Black? Thanks

[@z-made]

pretty simple actually, just go into preferences and change the theme to dark mode, hope this helps😊

[@droneflixx]

about to pick one up, looking forward to more of your videos

[@z-made]

Awesome droneflixx, looking forward to having you back!😊

[@ADWU1990]

Hey, where is the link to your Mount ? THis one looks really good ! Looking forward for the STL! Cheers and thanks for the video

[@z-made]

Hey Elektrodevil, thank you very much for your kind comment! I'm happy you found some value in my video, this is the link for the sonic pad mount STL, Link to my Etsy shop sonic pad stl: www.etsy.com/ca/listing/1414029409/creality-sonic-pad-mount-stl-for-munting

[@corporalbon]

Really great job with the video! Especially for not being a dedicated reviewer or anything like that. You definitely got a follow from me. I'd definitely like to see more 3d printing videos and sonic pad stuff.

[@z-made]

Awesome! Thank you!

[@thegreeklife2854]

So will this work with mriscoc software or would I have to reinstall original then klipper , I have E3V2 - BL/sprite-dual z-4.2.7 board Great video your a natural at this

[@ffinybryn]

Cannot setup other one-touch Preheat settings. Would be nice to have ABS nozzle/bed temps or change default.

[@z-made]

I agree😊

[@ryucosplayz]

is the sonic pad suitable for CR6-SE? Can it increase printing speed?

[@B0BB0S0]

Dude, I’d love for you to make that video of the learning curve comments and ins and outs to using this pad. I get a dumb key60 error code and have spent hours looking for help on that. I’d appreciate that!!!! U rock man!

[@EsotericArctos]

Can the SonicPad Creality version of Klipper be easily updated to new versions of Klipper or to have other printer.cfg files uploaded easily?

[@ThePrintHouse]

I think it is unfair to call the mounting a con because your setup is not normal. I also think you left out a large market of users. I have more than 4 printers ands the sonic pad is much better than a pi, and I consider myself a very advance user. Other than that, I really like your content!!! Keep up the good work!

[@z-made]

thanks😊

[@ringerdiggsycobbsy6254]

I have a reality CRX Pro can I have had for a few years I only use it for a hobby as well would it be ok to use this to upgrade mine

[@perfectscotty]

I’m having a hard time connecting it to my CR200b. Will get it though.

[@z-made]

Hey there Ghost, have you tried updating the sonic pads firmware, I know the older versions didn't have a pre-installed profile for the CR200b, but I found this thread on Reddit "www.reddit.com/r/CR_200B/comments/12fkl27/creality_sonic_pad_cr200b/ "it might help you out. Let me know how this goes "

[@perfectscotty]

@@z-made thank you. I did not update it as it already had the cr200b profile.

[@metalplaysgames]

im in for plug an play function with creality printers with mine being a cr10s

[@z-made]

Hey MetalPlaysGames, I fully agree, this is an awesome option😊

[@luvwud]

How does the pad connect to printer cable or sd card ? As my s1 reads the the file to print and then freezes. Cheers Geoff

Yes! Please do make a video/series on how to get the Sonic pad running as its best. I have an Ender-3 Pro and do like Octo but the time investment in all the work plus the fact that I can but it as a bundle with a Spider hot end just seems to make it a no-brainer Can you also do a video on the (I assume optional) G-Force attachment? Wondering how I would add that and if it adds value or not. BUT I have heard horror stories about an update messing up the Sonic Pad. Is that the case or it that rare or just with unique setups? I may still some day do the Pi4B/Pi3B route but at least I have all the benefits and use of my printer right now. Also I LOVE the mount! Any chance you can do a video series to show how to use whatever design software you think is best? I already saved 3x more than what my printer costs by printing bushings for my Anderson screen door which they do not sell a new hinge or bushings for. I was even able to make various sizes that accounted for wear too. I also need to learn how to post my STL files on 3d printing sites.

[@ajmckay2]

Great video! I have a pi 3b sitting idle but I'm also considering the sonic pad due to the screen and the integration with creality printers. I feel like I'd rather spend my time honing my 3d modeling skills rather than learning how to setup klipper on my printers. At least that's what I think now. I do plan to research the process a little bit more to see if it will work and be cheaper.

[@z-made]

Hey ajmckay2, thank you for your kind comment and I agree, the sonic pad is an awesome tool that helps you cut out a lot of the headache of setting up klipper on a Raspberry Pi, thus allowing you to focus on the important part of 3d printing, actually creating stuff, but I see your point if you already have a raspberry pi at home, it might be a cheaper option, I think it comes down to how much technical skill you have and how much time your willing to devote to upgrading to klipper, please let me know what you end up deciding

[@HITEMUPGaming]

I don't see the link to the stl file for the tablet mount

[@Oliver1071]

An update about the SP. It was working great with my MK3s and SV06 Plus. I had everything dialed in and printing better than ever. Then I began having hardware issues. Constant MCU overload errors I couldn't finish a print. I tried contacting support but they said that they do not support non-creality printers and kept closing my tickets. So a note to people who may want one for non-creality printers. You're on your own if you have any hardware issues with the sonic pad. You may want to look in to a Pad 7. For me it was easy enough to configure Klipper using an old computer, kiauh and xubuntu. Very disappointing I really liked the clean look of the Sonic pad in my work area. If I had one creality printer I could have at least pushed support to replace the defective hardware but they wouldn't help at all.

[@z-made]

hey @Oliver1071 , That sounds unpleasant, I'm sorry to hear that, wish you luck 😊

[@Oliver1071]

@@z-made It worked out I didn't realize just how easy it was to setup and gain all of the features and flexibility that you miss out on with the SP. Have a 7 port usb hub hooked up and web cams on every printer and the thing isn't even breaking a sweat. And never some random disconnect.

[@anthonylarick7973]

love my sonic pad too

[@kfm6296]

I bought the stl sonic pad mount from you and I am having issues printing. What settings do you recommend? I cannot get the support to print well so the “legs” are not fitting into the body well. Any suggestions?

[@z-made]

hey there, kfm, first of all, thank you, second, try to lay the "tree with the branches" aka the cylinder, flat on its back with the branches facing up toward the extruder, with no supports, let me know how it goes😊

[@adrianlopezalmaguer8700]

Hello, thanks for your videos, do you recommend buying the sonic pad, or continue with raspberry?

[@z-made]

That depends on whether you have klipper up and running already on your printer with the raspberry and if a large touch screen is something that interests you, if you already have a raspberry pi running klipper and have access to a touch screen and accelerometer i think you could pass on the sonic pad, but if not then i think the sonic pad is the best bang for your buck upgrade you can get for your 3d printer and it can run 4 different printers at a time

[@z-made]

I hope I answered your question

[@adrianlopezalmaguer8700]

@@z-made Thank you very much for your answer, at this moment I am placing the order, thank you again

[@z-made]

@@adrianlopezalmaguer8700 Awesome sounds great

[@BasteLey]

I sent it back. Wasnt possible to adapt my Creality CR6se. I have the older 4.5.2 mainboard: no connection. With the second choice the 4.5.3 mainboard I got connection, but later failure of course. I m so sad, that creality not even can manage their own printers.

[@z-made]

Ya that sucks, I'm sorry to hear that, Creality just included a whole bunch of new printers to the compatibility list in there new update, mabey yours is one of them

[@jurajgarazia6768]

Elder5 s1 printer was sonic pad connected. how to use printer whitout sonic pad? Can`t use touch screen on printer :(

[@laggy231]

I was actually excited to do the process of setting up a pi and installing all the software and hardware but the price is just too high

[@DerekDarcy]

Quick question. If I have a phone that does connect to my printer and provides data and power would recommend running clipper on the phone or is the sonic pad a better option ? I am tech savy

[@z-made]

hey there Derek, ok so first of all thanks for the comment, second, that's a complex question, I think it depends on a number of factors, what printer you're using, what your budget is, and what flavor of smartphone you have, to name a few, but bottom line, if you have the time and experience to get klipper up and running on your printer and you enjoy the process of getting that up and running then I say go for it, this is a link to the GitHub page to help you get klipper running (if your using android) "github.com/d4rk50ul1/klipper-on-android" but if you would rather a smooth process and have the budget i would suggest the sonic pad, but of course, this is all my humble opinion, please let me know what you decided to do

[@DerekDarcy]

@@z-made thanks for the information. I work in IT tech support. The reason I opted for a phone is I have a Samsung A50 that I no longer use and it has a built in camera for time lapse whereas the sonic pad does not: also using a phone I already have reduces the cost significantly. Will do some research and see what I can do. I have an ender 3 pro as well as a Monoprice maker select plus printet

[@z-made]

​@@DerekDarcy ok, that sounds awesome, let me know how this works out for you, I'm wondering if you can manage to run more than one printer off the phone, let me know if you can😊

[@richardgarnett9264]

I have the same printer as you but for some reason I cannot get it to connect to my printer. Nor can I get it to even read the SD card that flashed my smart pro moments prior 😂

[@z-made]

Hey Richard, there are 2 different boards Creality uses for the s1 pro, your printer might have a different board than the one you chose when originally setting it up. Have you tried setting up the sonic pad with both of them?

[@christrimble7936]

I’m newer to 3D printing and got the sonic pad mainly for the ability to send from my computer. So far so good but I am having issues with the temps. I set my temps when I slice it in Cura but the Sonic Pad keeps setting the temps (Hotend and Bed) back to its presets. Anyone else have this issue or know a fix?

[@z-made]

you might have to do some PID tuning,, what printer are you using?

[@chrisvoelker5704]

Will this work with an BFF board and idex heads?

[@chrisvoelker5704]

I meant a BTT skr pro board upgrade

[@z-made]

klipper supports idex, this is a link to an article from klipper explaining support, hope this helps😊

[@Harry-Har]

Any walk thru you can do would be helpful. It's always better to watch someone actually go through the steps to understand the process.

[@z-made]

Ya for sure, I wholeheartedly agree, I have 2 videos one on input shaping and the other on pressure advance, kinda goofed on the input shaping intro, but aside from that both are a step-by-step walkthrough of how to get the most out of the sonic pad , I hope you enjoy them, if you think of any other walkthroughs that might be helpful I'm sure it would be helpful to everyone else as well let me know and il do my best to get that out as well

[@z-made]

kzbin.info/www/bejne/nHrIdaeGi92DaJI

[@EndlessSims3]

How can I get one for my Creative 3d Neo printer?

[@z-made]

Hey there Heavenly, the Ender 3 neo 3d printer is luckily supported by the sonic pad, this is an affiliate link to it on Amazon "Link to the Sonic Pad on Amazon:amzn.to/3JVnl3u" I watched some of your videos on your channel, great stuff!

[@EndlessSims3]

@@z-made thank you very much 😊

[@z-made]

@@EndlessSims3 your welcome 😊

[@tracybradley5850]

Well done!

[@z-made]

thank you

[@MarcLuscher]

Plug and play ? Glad you think getting it up and running is a snap - any experts out there want mine ? The sonic pad has kept me from using my printer for over a week. Painful AF

[@Oliver1071]

Nice review thanks. I'm still on the fence about getting one for my SV06 plus and Prusa MK3s for the wireless capabilities. After being spoiled with my X1C. Though I think about it and I don't leave spools loaded on my other two because they're all in a damp basement so filament always goes in dry boxes. Also I'm not mass producing anything and I'm basically picking the colors when I dream up something so I'm in the basement anyway. Wireless really doesn't do much for me since I have to go down there anyway. Still its pretty cheap and might be nice to have the two also reachable from upstairs and hook up webcams.

[@z-made]

Hey OliverM3, first of all, thank you for your kind comments, second, I can understand your reservations about whether this would be a good fit for your setup, given that you store your filament in dry boxes and typically work in your basement where you're close to your printers that makes sense. While wireless connectivity may not be a top priority for you, I think the convenience of having your printers accessible from multiple locations and monitoring them remotely with webcams could definitely be a nice benefit. , so it may be worth considering even if you're not mass-producing anything. Ultimately, the decision of whether to invest in a Sonic Pad or not will depend on your personal preferences and workflow. If you do decide to try it out, I'd love to hear your thoughts on how it performs with your SV06 Plus and Prusa MK3S. Thanks again for watching my review!

[@Oliver1071]

@@z-made One down the SV06 Plus was the easiest of the bunch. 40min benchy so far on the plus with good quality not bad so far. The MK3s is still giving me problems with a "mcu 'mcu': Unable to extract params from :config_spi" error loading the config. And my Tevo I'm no where near ready with a complete config file. I was about to give up today and send the sonic pad back but finally found enough info on the SV06 to get me going. So far so good. Waiting on Amazon now for the web cam.

[@raulbarrera5748]

Make some videos on setting it up with an s1 pro

[@azedinerachidy537]

does the camera work with it?

[@z-made]

yes, it does, you can hook a webcam directly to the sonic pad, works like a charm

[@craigbennett2715]

I think the mounting is proper when you consider this runs up to four printers. Yes, for a single printer it could be better. Also, not many people have a printer on a shelf. How's the vibrations with that location? Nice video overall.

[@stephenjeppesen933]

Just a heads up to anyone, hopefully you'll never have to deal with webhook error msg's during prints with the Sonic Pad. I did and now I've got my first klipper install on my Ender 5 Plus due to the Sonic Pad could not complete a layer without dropping the connection to the printer. Klipper now setup and has been printing fine for hours with no issues. Sort of feel we may have the 1st or 2nd round of hardware and maybe it's best to wait till the next version.

[@z-made]

hey sorry to hear that, maybe a new software update might fix it for you, have you tried changing the cable you use to connect your sonic pad to your printer?

[@stephenjeppesen933]

@@z-made heh, a few of them! Even tried separating the power and data cables so they were not touching each other. What seemed to allow for the longest session was to turn off the sonic pad and printer for an hour, then it was able to print for maybe 1/2 hour before loosing the connection. It was working great up till a couple days ago. Latest updates as of yesterday too.

[@stephenjeppesen933]

@@z-made one week in and it looks like it may not have been the Sonic Pad after all. klippy started disconnecting also. Completed PID tune on the extruder no problem but when I tried to PID tune the bed, it dropped the connection suggesting I have a problem with the bed heater. Will dig into it.

[@z-made]

I'm happy things are progressing in a positive direction

[@z-made]

by the way, i had a question about input shaping on a core xy printer on another video of mine, by a guy named Ghxzt ×͜‬× I don't have enough experience on core xy printers running on klipper to answer his question do you think you might respond to him in the comments so I don't give him the wrong advice? kzbin.info/www/bejne/en61q6Smmd6Ga5I

[@bigdaddyed88]

I am about to return mine but did anyone have problems with bed size? I have ender 3 pro with 4.2.7/sprite/crtouch. With the "built in" profile for it the nozzle crashes into the bed and is not configured correctly.

[@z-made]

did you try changing the Z offset?

[@bigdaddyed88]

@@z-made Z offset is fine it is that the probe is probing off of the bed.

[@z-made]

you might have a problem with your printer config file

[@z-made]

the other thing that might affect this is if maybe you accidentally chose the ender 3 instead of the pro, which has a slightly larger print bed size (the print bed size in actuality not in the print area) and might be the cause of your issue

[@bigdaddyed88]

@@z-made I hope and also hope that is not the case because I would feel really stupid!! Thanks for the tips, will try this weekend after my current print is done.

[@jamesballowe7478]

Can I run 2-3 printers at once with this?

[@z-made]

Yes you can run up to 4 printers with the sonic pad😊

[@lessdatesmoreonmyplates1457]

​@@z-made how do you connect 4 printers to it? Do you need a USB hub?

[@marn200]

I’ve been trying to set this thing up for 4 hours, it’s not straightforward when it doesn’t work as it’s supposed to be, google doesn’t help, Reddit gives only answers to questions I didn’t ask, discord doesn’t respond at all, error messages are vague and every hates you when you don’t understand them. And the touch screen is a living hell, some parts don’t respond at all. And all this time I could’ve just used a raspberry pi?

[@asteriojaen7823]

Thanks

[@z-made]

Welcome😊

[@Magician1961]

nice viudeo, thanks

[@z-made]

Hey Steve C. I'm happy you found some value in my video😊 , thank you!

[@jessie38supercharged]

Didn't know John Travoltas son was in to printing

[@z-made]

😂

[@ankit-travelandgadgets]

Nice video 😀 🙏 namaste from 🇮🇳 india. I also have sonic pad but it's hot bed settings are 230-230-270 instead of 220-220-270 on ender s1 pro

[@z-made]

thank you😊 i'm glad you enjoyed the video

[@D809G]

Great vid..this is exactly what I needed to hear/see and kudos on the bracket design ᕙ(▀̿̿ĺ̯̿̿▀̿ ̿) ᕗ

[@K8Stuff]

The whole plug and play is also negated because you need to open up the printer to get the motherboard version.

[@z-made]

Hey Mike R, good point thanks for pointing that out😊

[@pimpinchevy75]

I can’t even get my sonic pad to to connect to my printer. It keeps saying something about the kipper.

[@z-made]

what printer do you have?

[@pimpinchevy75]

@@z-made ender 5 s1

[@pimpinchevy75]

So I finally got it to connect. The firmware on the provided sd card was corrupt. Found the firmware online a used a different SD card and got everything to work finally.

[@z-made]

@@pimpinchevy75 That's awesome!!I 'm very happy to hear that😁

[@pimpinchevy75]

@@z-made did the test print of the little boat, now we have been printing an articulating triceratops for over 24 hours for my son. Got a little ways to go with that print but it’s coming out awesome!

[@jonathanp906]

Oh my goodness... CURA HAS DARK MODE!?!! THANK YOU!!!

[@z-made]

😁 Ya, i love it 😊

[@Back_Room_WorkShop]

I got one and it has never worked and Crealirty customer support sux. 4 Months of back and forth I have perched NEW CABLES AND SD CARDS AND PRINTED SEVERAL CLIPS TO HOLD ALL THE CONNECTORS TIGHT LIKE THEY TOLD ME TOO. I SENT THEM VIDEOS OF IT FAILING AND COPYS ON WERE I PERCHED IT AND THEY REFUSE TO REPLACE THEI BAD PRODUCT. IF I WERE YOU I WOULD QUIT HELPING THESE PEOPLE RIP PEOPLE OFF.

[@realDragonJT]

Just started the video, bought it 2 days ago. So dont make me regret it

[@z-made]

hey realDragonJT, good luck with your new sonic pad

[@graphguy]

I have a neo max and the speed sucks. It amazes me people waste so much time with this hobby. I'm going to buy a pad, if it doesn't address the speed issue... it all goes into the garbage.

[@z-made]

I'm sure it will😊

[@DavidMiOo]

FML KZbin sucks for 3D Printing stuff now. Want to know something beyond someone who's brand new to 3D Printing. Tough luck, newbies = more rev for sellouts :/

[@christopherbennett1350]

Print up a better stand and sell it. 🤪👍

[@z-made]

Thanks for the tip Christopher

[@jonathanp906]

I need to correct your grammer sir... you should not say "its more... comfortable". You say: "Its more... better". "More better" is more better. You can even throw an extra "er" on the end, like this: "Its more betterer".

[@z-made]

😂