No video

Create your own isometric MFT Worktop without an expensive guide!

  Рет қаралды 12,488

Dope DIY

Dope DIY

Күн бұрын

MFT style workbenches are the hot new thing, but do you really need to spend hundreds of dollars on professional templates or custom CNC work? Not with this simple technique that only requires an edge guide, a drill guide, and a 3/4in spade bit with a speedbore tip.

Пікірлер: 16
@stevenjwagner
@stevenjwagner Жыл бұрын
Great video and ingenuity. using the rip fence/edge guide is smart. Much faster than measuring everything by hand. I'd buy you a beer if I could!
@psuryava
@psuryava Жыл бұрын
Very good idea . But the accuracy will be lacking here since the offsets with the Kreg guide are visual. even a few thousands of inches will quickly translate to big deviations on that scale. also the holes are drilled based on visual centering only which is not accurate when you are drilling so many holes. It would have been better to use this approach to make a smaller template and then use that drill out the bigger board.
@TheLastPharm
@TheLastPharm Жыл бұрын
My thoughts exactly. Way too many variables that will diminish the accuracy of the end result. It's either dead on or you have a perforated sheet of mdf that you can use as an assembly table.
@paulm3969
@paulm3969 8 ай бұрын
It's the internet, who cares about truth ?
@markgilder9990
@markgilder9990 3 жыл бұрын
Great vid. Thanks. Will try this method.
@colemine7008
@colemine7008 2 жыл бұрын
excellent video
@franceshawe9572
@franceshawe9572 6 ай бұрын
Good looking job. Has it worked out well for you.
@billkeim8039
@billkeim8039 3 жыл бұрын
You didn't get much of a reaction to this low-cost approach to creating an MFT bench without CNC or an expensive template. Your suggested approach was my second attempt at doing this and it worked great! With my first approach I used pegboard to create a template but the result wasn't very successful in creating a square grid. I used you approach and it worked great. I still had some blowout with the holes but I think that was due to using Sande plywood. Doing a deeper than ideal router bevel took care of most of it. Thanks for researching and sharing this approach.
@wwmilanl
@wwmilanl 2 жыл бұрын
Hello Bill, Sorry to ask, why do you say the Pegboard did not work??? what was the issue? can you share some feedback on this??? look to me that the method proposed on this video is more open to errors???, especially with a KREG jig I have one, and is not very precise in my opinion, thanks
@oldporkchops
@oldporkchops 2 жыл бұрын
Brilliant.
@xinixxagnix201
@xinixxagnix201 2 жыл бұрын
cool, only for clamping? If it is for the tracksaw make a 4 cut video ;-)
@jcoul1sc
@jcoul1sc 2 жыл бұрын
Good idea, but you could just as easily used a pencil and not weakened your top with saw cuts. if your top is 18mm - structurally its now 16mm thick with the score cuts.
@jimkb8tbi
@jimkb8tbi 2 жыл бұрын
I don't need to see every cut in real time. Boring!!
@jimkb8tbi
@jimkb8tbi 2 жыл бұрын
Where is the isometric? Look up the definition.
@dannymurphy1779
@dannymurphy1779 10 ай бұрын
A great effort but as others have said this won't be accurate enough, you have got to be using a template of some kind. Luckily you can now buy 3D printed ones that hook on a corner and then use dogs to peg it.
@TheBikerDodge
@TheBikerDodge 3 жыл бұрын
Before you make anymore videos try to locate your edit button
Tablesaw to Tracksaw, the MFT build - harder than you think!
19:44
Woodwork Journey
Рет қаралды 25 М.
Pool Bed Prank By My Grandpa 😂 #funny
00:47
SKITS
Рет қаралды 20 МЛН
Zombie Boy Saved My Life 💚
00:29
Alan Chikin Chow
Рет қаралды 21 МЛН
黑天使遇到什么了?#short #angel #clown
00:34
Super Beauty team
Рет қаралды 46 МЛН
I regret not building this sooner
14:39
MWA Woodworks
Рет қаралды 273 М.
DIY MFT Build Part 1
18:44
DIY Cave
Рет қаралды 17 М.
How to make a mft table
16:14
LTW Carpentry
Рет қаралды 9 М.
Plywood or MDF for MFT Workbench Builds? JP's Vlog #4
12:48
Small Barn Workshop
Рет қаралды 8 М.
Making An MFT Top - No CNC, No Guide Jigs
17:11
Rag 'n' Bone Brown
Рет қаралды 715 М.
DIY MFT | Multifunction Slab for Jobsites
6:35
Robert Dailey - Dailey Woodworks
Рет қаралды 116 М.
Festool MFT DIY accurate drilling jig
2:24
Jean-Marie Astruc Works
Рет қаралды 77 М.
BenchdogsUK HINGE for your track saw without MFT Top?? - Woodworking
21:33
DCreation Woodworking
Рет қаралды 15 М.
Build a MFT bench top with the Festool LR32
25:45
Ron Paulk
Рет қаралды 23 М.
Pool Bed Prank By My Grandpa 😂 #funny
00:47
SKITS
Рет қаралды 20 МЛН