Using AutoCAD to create automatic survey coordinates using simple text and points
Пікірлер: 150
@mybuddy3119 Жыл бұрын
It's been a decade and this video is still helpful. I watched it a few years back and only now i am applying it to my projects. Great video. Simple and easy to understand.
@pas158210 жыл бұрын
Great video, thank you. I too have been using AutoCAD for over 14 years & didn't know this command. However, the position option is not available in AutoCAD for Mac, do you know if there's another way to achieve this please?
@jamescarvell85554 жыл бұрын
HI. Great, thanks. A really useful tip. I understand the coordinates are relative to the world UCS. Is there a way you can change the UCS origin so the co-ordinates treat this new location as 0,0? Many thanks.
@charlitojr.albana558010 жыл бұрын
Thank you sir..I am new to autocad and i still have trouble on how to make the coordinates appear..beacause its not comming.please help thanks again.
@grahammurphy23573 жыл бұрын
Thanks for a great tutorial. As a further useful enhancement the point/E/N/Ht can be grouped together to keep them as one object. Then copied as a single object to multiple locations. Regen. All updated correctly inside group. If you copyclip to new drawing you will need to group them again...groups don't appear to transfer between drawings. This was done in full AutoCAD 2018.
@MuhammadHasnain-pm5oj9 жыл бұрын
sir i try to do this practice but when i select point point property is not showing so i can not see the positions pls advise me how i have to select my point thanks
@amjadali-bt3kw7 жыл бұрын
thank you sir, one more question how to make leader..
@1MITJA4 жыл бұрын
Very useful information. It helps me a lot. Thx.
@gregthayer23473 ай бұрын
I need to do this but survey scale is in feet and drawing units is in inches. When I divide the field value by 12 in my drawing it matches the value in the survey. Is there a way to automate the field so that it accounts for the scale factor?
@ismailkhan-in7hh4 жыл бұрын
thanks so much, the first time I learned how to make coordinates
@samsonlokor72742 жыл бұрын
Hi,my autocad version is 2022,and it doesn't have that FORMAT command. How do I go about it.
@simonwoods54068 жыл бұрын
Brill video, very helpful time saver, thank you
@felipepuerto47137 жыл бұрын
Thanks! Great explanation, very helpful!
@MrZakmuh Жыл бұрын
Nice one mate. Thanks a lot for sharing...helped a massively. Cheers!
@pakmcqs3605 жыл бұрын
I use wrong lisp... N=567876.908 E=675478.899 Now i want eastring is top and northing is in bottom also remove equal sign their are lots of coordinates can it possible if make change in one coordinate attomatticaly the other one change....
@javierm.95437 жыл бұрын
Very nice tutorial, thanks so much.
@geokani9 жыл бұрын
Hello, i got a difficult exercise for my uni,concering a draft on Autocad.i cant find the solution to this. can i send u the photografic form of my exercise and u could try to solve it for me? and then upload a video on utube to show me how u did it?
@jahongirbozorov2385 Жыл бұрын
EXCELLENT VIDEO. IT WAS VERY HELPFUL TO ME. I AM FROM UZBEKI SORRY IN ADVANCE IF THERE ARE MISTAKES IN MY SPELLING. THIS VIDEO I COULDN'T WRITE A COMMENT, THAT'S WHY I WROTE THROUGH TRANSLATE
@DavisInator653 жыл бұрын
How do you get eastings and northings?
@benthk3dprt1362 жыл бұрын
I am working with a different coordinate system (not easting northing) in autocad Map3D How can i make something like this but for the current coorindate system ?
@neteugen6 жыл бұрын
Hi Nicadman Can I ask You please How can I create a block with automatic survey coordinates? I create one but the coordinates not changes after REA command.
@premprasannashanmugham15203 жыл бұрын
I followed everything you said but still im getting the texts in cartesian coordinate system...can somebody help me out with this.? How do i get utm coordinates?
@MarkSomma4 жыл бұрын
today's date is June 29, 2020 I found this little video very useful. yet I noted that the REGENALL did not function in this circumstance for refreshing the data in the fields. (I'm using version autocad 2020) instead I used UPDATEFIELDS and chose to all the items to refresh and presto there it was.
@lubradoon10 жыл бұрын
Thanks very much for sharing this very useful piece of information. I am using bing maps in autocad civil 3D - 2014. This method is working but i want Geo coordinates on my design. UTM , LAT/LON format etc. If you suggest, I can send you any sample file.
@humamkhalid375011 жыл бұрын
thnx man i badly needed that method ..god bless you, i have a question , some times the area option doesnt show up in field options when i select polyline ,how can i fix that?.....i figured out how to solve that problem and that is by using BOUNDARY command that will plot an object inside your self intersecting curve regadrless the overlap........ regards,HK
@migasmanhaes6 жыл бұрын
Thank you so much, you saved my day !!!
@Repny2dafullest8132 жыл бұрын
Thanks man, I've been trying to find out how this is done on numerous occasions. Thank God it was explained in real English.😂😆
@robellevarquez90054 жыл бұрын
How to plot coordinates using ZWCAD 2019??
@dk988-y7 жыл бұрын
Hello, Am trying to learn how to draw a plot using the easting and northing coordinates. In here we get from out clients a paper detailing the position of their land plot (line by line) and the setbacks and neighboring elements or plot. I can draw a normal shaped plot lie a square or rectangle but the problem is if the shape is irregular. I was told that its possible to use the coordinates provided of its location and draw the plot with them. How you please explain to me how? i tried just entering the coordinates after clicking on the line command but ti didnt work.
@atifriaz48042 жыл бұрын
love you boss, you just made my day
@silveirasfam20449 ай бұрын
Hi Steve, Thanks for the great video with clear instructions to follow.
@sarathsudhesannair59258 жыл бұрын
can u show these in Autodesk AutoCAD 2015 please. bcoz in it the setting are more difficult.
@Seychelllian Жыл бұрын
Any idea how to set a base point to Easting and Northing coordinates if the drawing youre working with is not accurate?
@oOTBONE77Oo2 жыл бұрын
This has got to be one of the best tutorials for site engineers. Is there any way of showing a + or - and value for a slab survey at all?… like to show high or low values for an as-built?
@rudrakarki89807 жыл бұрын
thanks for video, but i have little different situtation, i want to set autocad file for longitude and latitude data input so i can measure the area of the plots. is it possible??
@ivanmartinez86843 жыл бұрын
what about creating lat and lon with points or convert from N and Easting coordinates
@kimlengyeo3086 Жыл бұрын
Thank you for your video, it help me easily to understand
@seyarbayat47702 жыл бұрын
Hi Nic, I love your short clips about AutoCAD and thank you for shearing. A AutoCAD file of a customer is send to me where the units are in Meters and have some land coordinates. however when I scale it up to millimeters, the land coordinates are multiplying as well. The land coordinates in this case shouldn't change. Do you have a solution to shear. Thanks in advance!
@qzorn44408 жыл бұрын
very good info. but why the pentagon for a training aid demo? thanks. :~ƒ .
@alanaldea44763 жыл бұрын
very well explained and very happy to see this, sir nicadman
@ishaquevaliyakath98567 жыл бұрын
how to change the coordinates right not possible its go to previous comment
@sharjilmohammedkunhi215110 жыл бұрын
it was soo greatful to see your way of teaching and thanx to you to help me out....
@chasingmariamusic26508 жыл бұрын
is it possible to use that if i want to have a multiple ucs in one modle? pls i wanna know how sir, thank you.
@cookingwithmother-in-law55907 жыл бұрын
thanks so much.
@vjviews74867 жыл бұрын
super !! i trying this program last 8 month but now i got this thanks ;)
@gubermicha10 жыл бұрын
hello, if I change coordinate system to my desired UCS, I still got position according to WCS, no matter of REGENALL command or anything else. Is there any help ?
@marlboro11418 жыл бұрын
if i want to change the coordinate at the point. how can i do ? please help me
@batangSM3 жыл бұрын
I had this kind of problem for our As-Built drawing requirements and you solved it for me. Thanks a lot Sir
@zahidkhan-yp1sy9 жыл бұрын
Sir nice vedieo i lern more more thanks sir i asking one question how to import from gps cordinate in autocad direct
@leemalan15099 жыл бұрын
thank you for the information. i really like the way you explain how it do it. after watching you do it, it was easy enough to do it. you explain it so much better than all the others. could you please explain how to create a table with those co-ords. is there a easy why how to do it.
@polyline88811 жыл бұрын
Check the units, the survey is probably set in meters where other files set in mm.
@markburton83033 жыл бұрын
Thanks for this, it helped me out no end!
@markcooper60424 жыл бұрын
Thank you; this is the most useful autocad tip.
@alialhameedi9903 жыл бұрын
Thank you so much
@jamalmalik41110 жыл бұрын
Much Easier Then CD Command
@sujithkannan1994 Жыл бұрын
you know how to install krookie in auto cadd
@sujithkannan1994 Жыл бұрын
pls help me any one
@seribubiosystemssdn.bhd.6038 жыл бұрын
Thanks .. very helpful
@mattaitchison670610 жыл бұрын
Thank you very much for that... Very Helpful,,, :)
@RogerDiotte2 жыл бұрын
Wow! Very Good!
@j.aashandilruksha43028 жыл бұрын
Thanks Dude.... Useful Video ....!!! :)
@muhammedenesi13793 жыл бұрын
So interesting
@dambaipenampang61583 жыл бұрын
Definitely help a lot on my work
@samratzzzz23993 жыл бұрын
very very helpful.. thankyou
@Mohammad121903 жыл бұрын
Thank you
@wendwossensiyoum5331 Жыл бұрын
THANKS
@MrMartinfcunningham11 жыл бұрын
Great tut! When I insert my field and change precision to '0', I still get 9 digits when the survey supplied to me has 6 digits (same as yours). I'm sure this would have a knock on effect when it comes to setting out?? any ideas???
@rajaraieesmir53467 жыл бұрын
Martin Cunningham hiiiii
@MsScream905 жыл бұрын
You are a great Guy thanks alot dude
@SmartcadSoftwareSolutions8 жыл бұрын
wow very nice,
@Mladen_Hadzija9 жыл бұрын
Label coordinates on point doesn't match with drawing coordinates, even when I click on "update field". How to set the origin of label to be the same as the drawing coordinates?
@MashedVids7 жыл бұрын
TRY UCS WORLD.
@ivanmendoza66186 жыл бұрын
Mladen H regen
@shamva66146 жыл бұрын
Very help full lesson thank u.
@SyedAli-zz6fm5 жыл бұрын
SHUKRAAN BHAI SAHAB . THANKSS
@brightsingh38056 жыл бұрын
Very useful and time saving.
@pandiyaraja317911 жыл бұрын
plese again upload . this not clear my dear sir thank you for upload
@ishaquevaliyakath98567 жыл бұрын
How to change the cordinates
@TheNileshbhosale19817 жыл бұрын
how to show these labels in Meters
@JYUNG8888883 жыл бұрын
That was great. Thanks bro.
@kevinshalander77811 жыл бұрын
Thanks for this video, it worked great. Except i cant change my precision vaule... anywho, thanks again.
@MrKeleta7 жыл бұрын
Thanks you are help me alot
@morenojc3310 жыл бұрын
Thanks! Funny how after 14 years using cad, there is still items i haven't used.
@rajaraieesmir53467 жыл бұрын
i need to learn auto cad civil 3D very fast.
@emeraldwutyie61559 жыл бұрын
Thanks a lot ,Sir.
@arieln82037 жыл бұрын
thank you for a very useful tutorial
@AgentAO76 жыл бұрын
I lost it on the first 10 seconds! Lol
@paddyaxe6 жыл бұрын
Very helpful thank you.
@STolleywood7 жыл бұрын
Hi there, when I select my point and go to property there is no option for position, any ideas why that might be?
@yasirofficial78647 жыл бұрын
when you select the point and open property in the property table geometry small arrow click so you will see position
@9188021321326 жыл бұрын
very nice sir....thanks
@md.rashidulislam91016 жыл бұрын
Thanks for give the video
@junabad34126 жыл бұрын
Just what i needed and thanks for such a very useful tip, more blessings to you!
@nemrodjalatan37964 жыл бұрын
GOOD LESSON TEACHER THANK YOU
@shahinebrahimi40629 жыл бұрын
Thank you nicadman
@rabuayya18 жыл бұрын
Thank man! handy video indeed :)
@monettegenova8878 жыл бұрын
where will I get that "format tab"? help please
@marlboro11418 жыл бұрын
near the top left there is a small triangle with the line above. click the triangle and select "show menu bar". that's it mate.
@emregitarcom91788 жыл бұрын
Thanks a lot!
@Marcellus_Hansel10 жыл бұрын
really helpful! Thanks so much
@mohdyns9 жыл бұрын
thank you for the information.
@tityavirakna11667 жыл бұрын
Sir ! How can I check the coordinate whether it was right or wrong ?
@Silent0pgamer2 жыл бұрын
Right click the coordinate and select properties, there you can see the x and y distances
@dirtbrainrecordings5 жыл бұрын
great! thanks!
@Youtuber-cw1jb Жыл бұрын
Great video
@ikramrao9 жыл бұрын
Thanks nicadman
@melvinkhowelsantos70517 жыл бұрын
Sir how about searching a coordinates in autocad?? or finding the location of the coordinates, i have the coordinates, but i dont know how to search it in the Cad, Thank you sir!
@melvinkhowelsantos70517 жыл бұрын
how to import the survey data ?
@Dagh17 жыл бұрын
To find a point that you have the coordinates of, you can just insert a point, then change its coordinates to the ones you want to mark in the properties of that point.