Creating Personalized Signs with Clear Acrylic, Vinyl, and Back Painting

[@2company3crowd63]

This video was very helpful. You explained everything. Thank you ma’am.

[@DesignCutters]

Opaque means the paint is NOT see-through, and transparent is what your first coat was. I have found that pulling the squeegee rather than pushing it results in less chance of snagging and shifting the letters and has less chance of getting trapped air bubbles.

[@claudiavessel2691]

Beautiful and beautiful font. 💛

[@worldwideteambasscatdownri6963]

Thank you so much

[@Sweetkandy23]

Thank you !!!!!❤

[@annettehendricks9569]

Thank you. Clear explanation. Do you have a video where you but the vinyl on the back of the acrylic and left the front clear?

[@cassidyraebarrera]

This is really cool!!

[@umarahanif6969]

I tried using acrylic paint. But it comes off so easily. Like even if my nail touched when it was dry, it scartched/came off easily. How can I secure the paint ?

[@abigail71999]

sealing glue

[@gailchastaingibson9575]

Just a tip instead of cutting the backing sheet remove it and use 2 pieces of parchment paper instead. Love the tool as well!

[@ClownfishDepot]

What's the benefit of using parchment paper instead?

[@Craftybowladychannel]

Thank you for this the hinged method using the tape in center was a great idea. I have been making Welcome Wedding signs and never used a foam brush either. I used a chip paint brush to get the same effects. I can't find the link for a clear acrylic boards

[@JohnsonPlasticsPlus]

Glad you found that helpful! We love to hear about how you are creating your products. Here is the clear acrylic: www.jpplus.com/translucent-cast-acrylic

[@natashastruwig8063]

Can I paint the cast acrylic then cut it with a laser machine? Afraid its not good or the paint will come off in time. Love this I dont have a vinyl cutter only laser machine and sublimation appliances

[@viragocandlestudio8780]

love this! do you also sell the wooden base for the acrylic stands

[@jeffreyallen3796]

Katelynn Question could you engrave the backside where you painted and put LEDs around it would the engraving glow?

[@al2mate]

What is the tool that you are using to remove the plastic from the acrylic? Thanks.

[@cindy-gs7yt]

Hi. Where do I get the vinyl transfer and printer

[@christinemunoz821]

What type of gold paint did you use?? It's a nice color

[@ronyhomoet1265]

How long did you let the first coat dry?

[@jessicarivera8373]

What brand or type of paint do you use?

[@francis202004]

That’s my question too.

[@mlistander]

What is the tool you used to start the vinyl to release

[@mlistander]

What fonts did you use ❤

[@andreaballentine2917]

What if you make a mistake and need to remove the paint and start over? What can you use to remove the dried paint?

[@Connie4422]

I would clean the surface before applying the vinyl after you placed your hands on it tearing off the plastic. JS

[@fatisummer9106]

Can I use Enamel paints instead of of acrylic paint cuz of sign is huge and there are many and acrylic paint are expensive and very small

[@jenniferhawkins9116]

What’s the name of the vinyl you are using?

[@MellyOlivares]

I wish she would reply to the questions asked.

[@anacheng6248]

Yes, please share the tool, I’d like to order one as well.