Easy Way To Sharpen A Chisel As Sharp As A Razor

Hello everyone! You are watching video "Easy Way To Sharpen A Chisel As Sharp As A Razor"
I hope you enjoy watching my video!
► Subscribe: bit.ly/Creatio...
On Creation Holic channel, you can learn various inventions, science projects, crafts and DIYs teaching how to reuse or recycle.
© Copyright by Creation Holic ☞ Do not Reup
#diy #tipsandtricks #diyprojects #tricks #inventions #Sharpen #diy #chisel

[@StuartSyvret]

Cabinet maker here; this is a load of bollocks. Get a honing guide, a strop, and some honing paste. Ignore this cobblers.

[@creationholic101]

Thank you for watching

[@robertmooney9102]

Now the stone will develop a hollow from only using half its length due to the wooden block. Proper use of a stone is to use its entire length

[@creationholic101]

Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!

[@annabellevsedward1440]

Every chisel and plane iron should have two angles on the cutting edge unless I have been doing it wrong for 60 years as a joiner

[@marcovaldez643]

160. Or 40. According to the people perspective.

[@hixyz19999]

On a wood chisel, one side is flat, the other side has an angle. Always, everywhere.

[@fredschepers5149]

That's not entirely true. You can add a secondary micro bevel to make touching honing easier. ​@@hixyz19999

[@charlesnoska2225]

A chisel is NEVER sharpened with two angles. Why do you think the back is flat. It is not a knife.

[@mattb2]

She doesn’t mean an angle on one side and a different angle on the back 🙄. Traditionally chisels are sharpened at two angles but have a look at Paul Sellers style. He sharpens at one angle and works great 👍

[@belsolte7593]

EXCELLENT CARPENTRY HAS BEEN DONE BY SKILLED CRAFTMENT THOUSANDS OF YEARS AGO WITHOUT THESE SILLY THINGS !

[@creationholic101]

Thank you for watching

[@johnmuzzo1971]

I thought everyone knew about the two bevels on a chisel??? I knew it in shop class in 1964 and it has worked excellently for me since then through hundreds of chisels of various sizes......

[@creationholic101]

Thank you for sharing your feedback

[@sorricohp10]

Total waste of time and not easy at all. The battery part was nonsense, too (only dulled the edge, didn't refine it at all).

[@creationholic101]

It's quite effective, you can try it and feel it

[@markjackson2004]

@@creationholic101 No it isn't. The burr won't even be on that side of the bevel. This is rubbish.

[@TheGrumpybstard]

A minty fresh chisel is the cornerstone of every woodworker's 'shop!

[@creationholic101]

Absolutely! Keeping tools in top shape is key to great woodworking.

[@RidseardMhicCoinnich]

Honing guide, wet stone, then leather strop and paste. Wood + water not a good combination.

[@robertopullara5564]

Y madera sobre la piedra de afilar, menos aún

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@iyanjak30]

2000 years later..

[@creationholic101]

Thank you for watching

[@karendasilva3199]

Exelente 👏❣️ saludos desde Uruguay 🇺🇾 Montevideo. Solo decir que ni loca hago todo eso para afilar....te felicito 😊

[@creationholic101]

It looks difficult if you think it's a one-time use, but with many subsequent uses, you'll see it's very effective and quick.

[@BW-fe2mc]

Just get a Veritas or Eclipse sharpening jig. Job done.

[@creationholic101]

Thanks for sharing!

[@M1903a4]

Yup. Been using the Veritas one for years. AND, it is adjustable for the bevels of ALL my many chisels.

[@Gowood2020-ne6rx]

Will try it for once

[@Lloyd1940]

Try using all of the saw blade. Save a lot of effort and steel by using a second bevel for a cutting edge. Love the wedge device.

[@Baurzhan79]

Спасибо за видео полезные 🎉🎉🎉🎉❤❤❤❤❤❤

[@creationholic101]

Thank you! Cheers!

[@roddas26]

The way you used that saw was hard to watch 😂

[@creationholic101]

Haha, thanks for pointing that out! I’ll make sure to improve my technique.

[@CecilSavage-iq9zq]

​@@creationholic101 very hard.

[@neilholmes6951]

First you need to flatten the face of the chisel then work the bevels😢 and the wood is destroying your water stone

[@JendyDIY]

Thank you for sharing! I usually use an angle grinder to sharpen 👍👍

[@creationholic101]

Great tip!

[@Dan-ti6wg]

😅😅 I'm saying hope that ain't included for pay by the hour you'd never get done and the company be making bank

[@williampower9084]

What a load of Cobblers

[@johnmuzzo1971]

Any intersection of two planes along its longitudinal dimension will produce the same result: a sharp edge.

[@creationholic101]

Thank you! Cheers!

[@Recyclingandcreative]

That's right

[@antoniopadula6967]

Mi devi restituire 10 minuti della mia vita che ho perduto guardando questa serie di cavolate

[@creationholic101]

Mi dispiace che non ti sia piaciuto! Se hai suggerimenti su come migliorare, li ascolterò với sự vui vẻ!

[@scopex2749]

My old dad was a superb chippy, he taught me with an oilstone and an old leather belt. You could have SHAVED with his chisels, like straight razors! He even sharpened his drills by hand, the skills that man had were amazing to me. I never mastered drills sadly.

[@richardmccann9293]

My dad taught me the same. I just use a wetstone like in the video (but with a store bought chisel block instead of making it out of wood) and then scrape it off afterwards on a piece of leather. Much faster and less messy than using toothpaste and an old battery :)

[@creationholic101]

Your dad sounds like a true craftsman! Those skills are incredible, especially sharpening drills by hand. Even though mastering drills is tough, it's great that you have those memories and skills passed down!

[@1stFlyingeagle]

And load the stone up with wood pulp.

[@creationholic101]

Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!

[@stuartmacleod7324]

A good advert for buying a Tormek!

[@creationholic101]

Thank you for watching

[@vladimir51ful]

Чудеса да и только!!!

[@creationholic101]

Спасибо за ваш энтузиазм! Рад, что вам понравилось.

[@timmueller1314]

And, what exactly does the battery do?.....

[@creationholic101]

battery and toothpaste help remove remaining stains and plaque

[@michaelowen6940]

nowt!

[@iracelymoreira1161]

Preciosa ideia, vou copiar. O meu obrigada de Juiz de Fora MG

[@creationholic101]

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

[@YakMan1313]

Hell throw a couple of Crest White strips on it, too. 😂 Or skip a step and slather some of that toothpaste on the stone. Or better still do it free hand much quicker. Nuff said !!

[@عربيجنوبي-ض5ت]

*لحن الحق جميل_ عندما_* *_يعزف بأوتـار- 🎹 الضميـر_* *_ويثور كألبركان من_** اعماق_* *_الشعـور الرحيــم_** متكحلاً_* *_بكامل اناقته يرتدي معطف_* *_الـإنسـان💎 النبيل👑💓_* *_جل إحترامي وتقديري💞_* *_وعظيم ودي لك إيُُهآ🌠_* *_الأخ الأصيل الجميل🪚_* *_( 💫 وشعبك الأصيل 💫 )_* 👑👑👑👑👑👑👑👑 💝👉👈💖⚘⚘ 🪐🪐 🪐 🪐🪐🌠 🌠🕊💌

[@creationholic101]

Shukran jazeelan! Ana sa'id bi kalimatak aljameela.

[@severo3708]

Idéia magnífica com certeza vou copiar.

[@creationholic101]

Glad you like them!

[@LiudsesuymigoeKuyteamihuydo]

This is exactly what I needed.

[@creationholic101]

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

[@MarshalTriumph-p1h]

I'm not a joiner but I have enough skill to sharpen a chisel, otherwise I shouldn't be using one. What a "Heath Robinson" device you have knocked up here. Reminds me of my childhood watching Blue Peter. The only thing missing is the empty washing up liquid bottle.😁

[@creationholic101]

Haha, thanks for the laugh! Glad it brought back some nostalgic memories.

[@Dooguk]

Did you forget about the "sticky back plastic" known to the rest of the world that is not the BBC as Sellotape?

[@MarshalTriumph-p1h]

@@Dooguk Yes, lol. I'm glad I no longer help fund that organisation.

[@moethida-t2j]

thanks for your idea .

[@creationholic101]

So nice of you

[@biglewdog411]

I carry a battery on me at all times to sharpen my knifes 😂

[@creationholic101]

Thank you for watching

[@Talltreejunction]

Fantastic idea

[@creationholic101]

Glad you think so!

[@bobsherokee]

São Paulo. Brazil.

[@creationholic101]

Welcome to Creation Holic channel! Hope you have a good time while watching the video

[@keneng2172]

日本では鑿の平たい底面を真っ平にして木に張り付く感覚が重要です。

[@creationholic101]

ご指摘ありがとうございます。確かに、木工の際に工具の平らな底面が重要です。

[@deniscatherine8446]

Félicitations----->> congratulations.. bonjour de la France 🙋‍♂️🇨🇵🙋‍♂️

[@creationholic101]

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

[@deniscatherine8446]

Merci, ​@@creationholic101

[@MrSagoo]

Hi

[@creationholic101]

Thanks so much for watching our video. Wish you all the best

[@yusufarabac54]

Çok iyi usta.. Tebrikler 🙏

[@creationholic101]

Thank you for watching

[@CreationHub-e1s]

The video is great. Thank you for sharing!!

[@creationholic101]

Thank you too!

[@moniquebosa4227]

Très très bonne idée : from Québec, Canada

[@creationholic101]

Merci beaucoup pour votre retour positif ! Salutations du Québec !

[@josuearaujo2608]

Excelente ideia

[@creationholic101]

Glad you like them!

[@79CreativeTechniques]

6:15 very good and interesting tips thank you for sharing the useful cell video

[@creationholic101]

So nice of you

[@gianlucacapretti4630]

Parma...👍

[@creationholic101]

Welcome to Creation Holic channel! Hope you have a good time while watching the video

[@boeynara851]

I use a honing guide and is much accurate

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@paulfernandez2695]

Muy bueno tu video. Nunca he obtenido un filo asi. Probaré🎉🎉

[@creationholic101]

Come on, you can do it

[@chewispa4653]

Gracias por compartir.

[@creationholic101]

Glad you like them!

[@taikyuns5034]

1 잘 배우고 갑니다

[@creationholic101]

Thank you for watching

[@anthonylowe5770]

Will try using a Dremel with sanding disk

[@creationholic101]

Thank you for watching

[@50MDiyTechIphone]

Thank you for sharing these great tips.

[@creationholic101]

Glad it was helpful!

[@jimkerr9921]

Load of crap. Never seen a carpenter or a joiner using a battery or toothpaste sharpening a chisel.

[@creationholic101]

battery and toothpaste help remove remaining stains and plaque

[@malijyasra1802]

I am frome Algeria Je suis Algérien Bon courage Good luck

[@creationholic101]

Thank you! Cheers!

[@kemoawad1565]

عملية سن العدد ليس محتاجة معجون و حجر بطارية كفايه مسن الماء فقط

[@creationholic101]

it will be easier if you use this tool, the battery and toothpaste help remove the plaque left over after grinding

[@ณัฐณิชาแพะทอง-ฎ6ร]

แบ่งปันเลิฟไทยแลนด์🇹🇭❤️❤️❤️

[@creationholic101]

Thank you! Cheers!

[@chasjacks9378]

You are not sharpening the chisel. You are honing the chisel. You should know better.

[@creationholic101]

Thank you! Cheers!

[@LuisArnoldoEspinozaPerez]

Is verygood,may name,Luis Espinoza,may country,Chile

[@creationholic101]

Thanks for watching, Luis! Greetings to you and Chile!

[@vicentemirandapaulocostacr8843]

Sou de São Domingos do Araguaia, no Estado do Pará Brasil.

[@creationholic101]

Obrigado por compartilhar! Saudações a São Domingos do Araguaia!

[@marcovaldez643]

No es la maquinaria, es la inventiva , cuando no se tiene un aparato. Yo afilo mis brocas y chisels a pulso con esmeril. Esta es una buena idea.

[@creationholic101]

Thank you! Cheers!

[@Cornélius45]

Bonjour, je Vien de France.

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@franknguyen8497]

so what happen when the piece of wood swell up ? would the change the angle?

[@creationholic101]

That’s a great question! If the wood swells, it might indeed affect the angle, and adjustments would be necessary.

[@garyhead577]

Need to sharpen the saw...😂

[@origindo1123]

needs to learn how to use it properly

[@creationholic101]

Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!

[@RafaelBcn-of9xm]

Me llamo Rafael soy de España Barcelona 😊

[@creationholic101]

Gracias, Rafael! Encantado de conocerte. Saludos a Barcelona 😊

[@wearsider]

They advise you not to take the covering from the batteries because of chemical leakage and possibility of causing a fire which lithium is well known for.

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@josefranciscosalcedo8683]

Desde Valencia _España

[@creationholic101]

Welcome to Creation Holic channel! Hope you have a good time while watching the video

[@MaximoAyllon]

Argentina la Pampa

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@mochmulyadi3527]

Sebenarnya tutorial ini hanya mengedepankan cara mengasah pahat dengan sudut yg stabil menggunakan kayu. Dengan demikian akan mendapat hasil sudut yg rata sesuai diharapkan. Hala hal lain tentu semua orang sudah mengenalnya.

[@markrainford1219]

Seven thousand likes? Loada bollox.

[@creationholic101]

Thanks for sharing your thoughts! I appreciate all feedback and always look for ways to improve my content. 😊

[@robsedgley199]

As a joiner of 50years plus,this is such a joke,try learning to use a saw properly first,having used Japanese waterstones for nearly 30years,I am more than qualified to comment,just buy a decent honing guide,then get some decent chisels to sharpen.

[@creationholic101]

Thanks for your feedback. Your expertise is appreciated, and I'll consider your advice on proper techniques and tools.

[@mikltank9043]

😂 the easiest way)) no way))

[@bobski7032]

You didn’t have to be snotty

[@tonykulikovsky]

I use a honing guide and its so ea

[@billpalmer7723]

I really don't believe he was being snotty he was just being direct and toe in to the point people it's all about how to take information and make improvements not about our feminine side 😊

[@sefag04]

Buena idea, sólo que aquí en Chile no consigues piedra de afilar de esa categoría y menos grano fino, solo chinitas muy malas.

[@creationholic101]

😮😮😮Thank you for watching

[@dalanbronnenberg]

For about $200 I got a worksharp wheel

[@creationholic101]

That’s a great investment if you do a lot of sharpening. Thanks for sharing!

[@fernandogarces5073]

Está bien

[@creationholic101]

Thank you for watching

[@tonykulikovsky]

I fell asleep

[@creationholic101]

Sorry it wasn’t engaging enough to keep you awake! I’ll keep working on improving.

[@robertcooper3491]

So did I 😂

[@wz4554]

Poland

[@creationholic101]

Welcome to Creation Holic channel! Hope you have a good time while watching the video

[@marioriveiro8622]

Disculpa la ignoramcia pero a la madera no lo jode a la piedra gracias pero muy bueno

[@creationholic101]

Thank you! Cheers!

[@marppp28]

Does it have to be Colgate or could be aqua fresh?

[@creationholic101]

Colgate

[@el-chiflao1713]

Gracias

[@creationholic101]

Glad you like them!

[@genisfdzfrs1349]

Tot el video esperant la bateria 😅 de veritat es necessari?

[@creationholic101]

It is pretty good at removing plaque and remaining stains.

[@RolandDöller-l3t]

Was sind das für Spielereien?Ich bin Zimmerer und nehme das sticheisen in die eine und den abziehstein in die andere hand. Wird scharf wie hulle

[@creationholic101]

Cảm ơn bạn đã chia sẻ phương pháp của mình! Sự kết hợp của đục và đá mài chắc chắn mang lại kết quả tốt.

[@gregoryr4303]

To rzeczywiście łatwy sposób.Żeby maostrzyć trzeba mieć piłę,wiertarkę,imadło itd...😢

[@creationholic101]

bạn chỉ cần chế tạo 1 lần, các lần mài dao tiếp theo bạn mất chưa tới 1 phút

[@antlan9292]

Muy complicado y muy largo, con un afilador llegas a lo mismo mas rapidamente.

[@creationholic101]

Thank you! Cheers!

[@joe-hp4nk]

She really knows her stuff.

[@papamalta]

Decime que de verdad haces eso para retocar el filo del formón

[@creationholic101]

Welcome to Creation Holic channel! Hope you have a good time while watching the video

[@ИванПетров-г8щ]

потрясающе! - в 2024 году открыть Америку вновь, на тех же самых Колумбовых кораблях....

[@creationholic101]

Thank you for watching

[@juliomoran5424]

Está es la manera fácil??

[@creationholic101]

I think so

[@luislopezdenava1555]

Que tal de Durango Mexico.

[@wesylequeiros5752]

Itarema Ceará brasil

[@creationholic101]

Thank you for watching

[@LeeRex1]

This is useless! Are you going to waste time making a separate jig for each chisel or would you rather get back to your project quickly? Properly done and with practice, a sharp edge should take no more than 30 seconds. It comes down to this: Would you prefer to be known as a chisel sharpener or a wood worker? So, do it by hand! Just you, your chisel and a stone. Once you get a feel for it, it's yours for life.

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@こっちたん]

日本の鹿児島県です

[@creationholic101]

Nice to hear from you in Kagoshima! Thanks for watching!

[@heknows5418]

Maybe sharpening that handsaw might be a good idea

[@creationholic101]

Thank you for watching

[@JesusFerrer-d6d]

De VENEZUELA.

[@creationholic101]

¡Saludos a Venezuela! Muchas gracias por tu apoyo.

[@josecarlosfirmino]

Duque de caxias rj

[@creationholic101]

Thank you for watching

[@michaelcorrado3452]

Wait! Isn't the 1000 a rougher grit than the 2000?

[@karendasilva3199]

Fácil??????

[@boudrymaurice3795]

exellent mais cela nest que pour un modele

[@creationholic101]

Thank you! Cheers!

[@jeancarneirobarros5414]

Um esmeril resolveria o problema rsrsrsrsrsrsrs

[@creationholic101]

Absolutely! A good grinder can save a lot of time!

[@CarloPaolinelli-vd6fu]

Se questo e' un modo semplice per affilare......

[@creationholic101]

You only need to craft it once, the next grinding takes less than 1 minute

[@SotSfe]

Athens Greece..

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@manfredriedelsheimer8927]

huhu: eine wahrlich exorbitant effektive methode so einen holzkeil aus eiche auf einem wasserbenetzten quarzgebundenem konglomeratstein in längsrichtung planparallel abzurichten

[@creationholic101]

Thank you for watching

[@michaelhorne1955]

N.E. Texas

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@Gowood2020-ne6rx]

But some time It depends on quality of the chisel and oilstone

[@creationholic101]

Thank you! Cheers!