How to replace a 2017 Chevy Impala Transmission Control Module TCM

[@Hebrewben144]

Thank you for uploading this video. Mine is doing thr same thing except for sometimes my drive indicators will show on the dash. I wasn't sure if I needed a tcm. It works fine most days but every time I put it in reverse it shifts hard.

[@deborahthemisses]

Yup mine is too. I have a 2014 LTZ...THERE should be a recall on the freaking TCM SYSTEM, so many Chevy Impala drivers are having this problem .

[@nestorgarcia1793]

What was the problem the vehicle had to begin with . Cause I just bought Same car and stabilitrak is on , jerks on reverse. Backup cam comes on when it wants and the lights on shifter come on when they want. I might have same issue.

[@henm4975]

Bad wires, bad TCM, bad ECM, bad fuses, bad relays, bad grounds. elimination process. this is only for code u0101 no comms with TCM. a bad speed sensor or wheel hubs can give Stabil track ABS codes, i just got done diagnosing my 2014 lt 3.6. I have no continuity from the ECM to the rest of the circuit 2500/2501. i do from the other end until the ECM

[@HotHeadQuise]

Thank you!!!! You should everything I have a 2013 same transmission as your year it was the last model before the model you have and it’s doing the same thing you explained with your car I was thinking if I should just get rid of the car because I already had to replace the transmission once but you gave me hope showing this video you’re awesome man!!!!

[@rculberson]

How can I get the new tcm programmed

[@CottoDIY]

I bought a parts car, swapped the tcm, and it did not need a flash or program.

[@Deewillz]

Take it to any GM dealer . They charged me $150 to program the TCM to my vin

[@nom7062]

Thank you for your video. I live in Korea, and my car is also waiting to be replaced due to a TCM problem. I ordered a rebuild and I'm waiting for it to arrive. When the TCM arrives, I plan to replace it myself, but I can't find information on the tightening torque for the transmission cover and TCM. If you know the tightening torque, can you share it with me? (Because a translator is used, the sentences may not sound natural. Please understand..)

[@CottoDIY]

Hello, I tightened them snug and then checked for leaks every day for a few days of driving. Also good idea to flush the transmission fluid. Around 5 qts in the bucket I caught the fluid with. They were not too difficult to loosen. I wouldn’t not tighten them with too much force. I don’t want to say a number and it be too tight but it couldn’t be more than 9-15lbs.

[@chrisg-nh1zs]

How long ago did you replace the tcm

[@CottoDIY]

Probably about a year ago now. No issues since.

[@splashaffects]

What a reasonable price to pay if a transmission place did this?

[@artemioaguilar571]

I have a chevy malibu 2015.....does it takes the same TCM MODULE?

[@edwarddavis4091]

2 questions sir, if I replace Tcm with one from another impala same one, do I still have to get it programmed? If so where should I go or look to do that?

[@CottoDIY]

I actually bought a parts car and did not program it. Plug and play for me. I can’t guarantee this will be the same case for you. Sorry 😢 hope my video helped. Suscribe if you can 😃

[@jerrybrunson5845]

Thank you for the video man. I have a 2014 with the same issue. Going to attempt to remove the old one this weekend and get it ready for the new one. It took me forever to trace the wires and make sure it wasn't just a loose or broken connection. All the wires are good and getting power like they should. I looked everywhere for a video on how to do this, and you just happened to upload this just in time. Did you have to drain the transmission fluid for this job? How long did it take you all together to get the old one out and put the new one in? Any pointers or advise you can give me to make things easier for me?

[@CottoDIY]

Yes you have to drain the fluid first. It’s a small drain plug too, not a big one. The tips would be to move as much wiring harness before you undo try to remove the plastic housing. It’s very difficult to get out. Also that sir took was a huge help since the space is very tight to work in. Take your time and flush the fluid twice after you change the tcm. The full capacity is close to 9 quarts I believe but you can change it out 5 quarts at a time. Take out 5 quarts, drive for a few weeks, then change out another 5qts.

[@eugenew6717]

Does unplugging it reset it?

[@410veno]

Can you do this without draining the Transmission fluid? Or there's way around it?

[@henm4975]

no

[@artemioaguilar571]

Thank you for uploading this video

[@LuisSanchez-eg6zg]

Awesome video. But now im having trouble with setting the screws back in

[@yellowthang22]

I have a 2017 impala . Does the reset actually work before the change out or is it a complete waste of time ?? I truly appreciate your video there's no one else I could find on the www smh. Thanks for the details and saving us time on the struggle lol . Blessings

[@CottoDIY]

The reset never worked for me. Happy to help with this video!!

[@maddogguzman3961]

Thanks for a great diy video!!!

[@reeaa876]

Great video, this is stabilitrak I’m currently having this problem. Car stuck in 1st gear, prndm won’t glow red, reverse camera doesn’t work

[@traptoontv]

Just buy a cheap odb tool to clear code. And restart car. It goes away. Until you find real problem.thats what i just did on mines to get it out of LIMPMODE

[@CottoDIY]

@traptoontv tried it. Didn’t work. The problem was the TCM.

[@traptoontv]

@@CottoDIY how much did it cost to replace.if you dont mind me asking...

[@CottoDIY]

I bought a parts car for $1500 and used a bunch of parts off it not just the TCM. Try eBay, they might have some used ones.

[@traptoontv]

@@CottoDIY thanks