CRF110 suspension and damping rods

[@Pow_Mafia]

Finally someone that was bright enough to have someone help hold the camera while they do it! thanks great vid.

[@kanewillsmore263]

this is extremely helpful for me because I'm hopefully going to do the same. sweet build

[@l2pr0tfrommyturm]

Such an easy simplistic video for us dummies. Thanks bro! Gonna use this when I do my forks

[@sean_cantrell]

Glad I can help! Like I said in the video, if I was able to figure it out you definitely can also

[@l2pr0tfrommyturm]

@@sean_cantrell just did mine yesterday brother. was super easy!

[@joemartinez9243]

I noticed you did not use the bushings that came with the BBR springs. Are they not needed if you use the BBR damping rods?

[@texasmotocross155]

What happened with the spacer bro ? why did you put it?

[@aeror115]

Cool video mate! My CRF110 is on the way to me! Taking delivery in a few hours🤘 so I’m gonna need some suspension parts and than I’m ready for some pit bike fun👍 Thanks for uploading this vid buddy

[@sean_cantrell]

AeroR hope this video helps! I definitely recommend bars, stiffer springs, damping rods and the oversized brackets with pegs. That will make the bike handle so much better!

[@aeror115]

@@sean_cantrell it helps a lot buddy thanks again ! It’s hard to get these parts over here in Germany. So I will buy it from murica🇺🇸 I’ve checked some other parts out but I’m not sure about the stronger footpeg mounts and skid plates! Any suggestions? There is a JTI skid plate for 600€ 😂 and others for round about 110$ Have a good one

[@Tyler-xz9zb]

What’s the background song? It’s kinda catchy.

[@nickmeo1161]

Stupid question but if I use the stock dampening rods with the bbr springs how much oil should I put in?

[@sean_cantrell]

Don’t quote me on it but I would say 150cc

[@tobyjarmey1394]

Do you need a new spring or can you just get the dampening rods and fit them ?

[@sean_cantrell]

You can do the damping rods only

[@KMKLYALLDAILY]

What seat is that? Is that the BBR tall seat?

[@multi-sports4700]

I weight 110 pounds. I am wondering if I should get adult springs? Thanks

[@sean_cantrell]

Wouldn’t hurt! Even at 110 pounds I think it’s a must to stiffen up these 110s

[@NickTvids-ls2cp]

No review at the end? How much of a difference was it for you? Was it a noticeable difference, do you like the change, is it worth doing?

[@sean_cantrell]

Huge difference I definitely suggest making these changes to improve the handling and have a smoother ride

[@sboyfilms1706]

Yo did you use the longer bbr dampening rods or just the regular BBR dampening rods

[@sean_cantrell]

Bbr damping rods

[@ConnorPredmetsky]

could you use the oil you take out of you front forks or no

[@sean_cantrell]

You could… I suggest new, clean oil though

[@Zokmonkey]

What shocks are those and can a 100lb rider use them or are they to heavy duty

[@sean_cantrell]

It is a dnm rear shock. It is quite a bit stiffer. I’m 150lbs but I do a lot of big stuff on these bikes so I need it on the stiffer side.

[@geoffkoop]

@@sean_cantrell does the DNM rear shock increase travel as well, or just stiffen it up? What spring weight did you go with?

[@geoffkoop]

Thanks for the video. Is the upgraded rear shock much better? Debating on what to upgrade when mine gets here.

[@sean_cantrell]

I definitely recommend the rear shock and stiffer springs in the forks. Makes the handling much better and a smoother ride

[@geoffkoop]

@@sean_cantrell did both and you are correct! Thanks

[@sonnyspicer6089]

when you racing pro?

[@sean_cantrell]

Sxucey Films sx 2021!

[@sonnyspicer6089]

@@sean_cantrell Sick cant wait to see you out there!!

[@navansangha3563]

cool