Cricket adjusting regulator bar pressure off the air tube

[@daddywags1000]

Thank you once again Ernest, very well done! Mike

[@krysks04]

Never too much info about regulators.. thanks a lot !

[@AKWAITI]

Thank you for your videos illustrations ... you are serving a large segment these videos my friend ... thanks again

[@kmhusain52]

Thanks a lot for putting all this information to your fellow air gunners

[@Jtwizzle]

Excellent tool! For someone doing this regularly it is a must have

[@garybillington2239]

When I work on this kind of project, if you are using a cylinder pcp, fill the cylinder with airsoft bb's and save 90% of the air you would usually waste, another great video fellah, you certainly know your stuff

[@accwowunu4245]

Great value. Great looks.

[@ThePCPhunter]

great video mate

[@salleandersson6556]

Excellent Video brother thanx a lot 👍

[@paulandrews3785]

Thanks for sharing your knowledge it's help me out lots of

[@hotrizzle15]

Excellent video bro, thank you

[@tomiiwnl6631]

ernest perfect, let me know which settings on the washers regulator has left you more satisfied, greetings

[@Hallyster1961]

Thank you for these awesome video, excellent explanations. Do you sell the tester? Or you can send me blueprints to make one? I can use a lathe and I would like to have one handy.

[@PeakyBlinder]

very good vid though

[@chrisfigueroa3361]

I want to see you adjust the taipan veteran long reg.

[@ernestrowe6974]

when adjusting the power both reg and spring has to be synchronized for best consistency/shot string

[@pilomas1]

Espectacular video, gracias

[@fisherman4042]

de que se trata el video?

[@elprincipiante8302]

Hi. I wanted to know how many millimeters you have in 130 bar?

[@Razertitina]

Ernest great video, What model pressure gauge is?? I need a gauge where I can purchase it, thank

[@crickratbowhuntersandoutdo3447]

Ernest can I buy one of these tester from you for my Crickets? I have both .22&.25

[@koppy721]

At the end of the regulator setting how many mm? Thank you!

[@fahadal-habsi2404]

Thanks for video… very valuable Where can I get the regulator tester?

[@ernestrowe6974]

4_4_4_4_5 this setting is vary consistent when around 50 to 70FPE

[@giacomo25030]

Hi Ernest,Where can I buy this tester for the regulation '. Thank you.

[@Bulldogwatches77]

Do you have any cricket reg setters Ernest I could do with one for my 177 and 22 ATB Adam

[@moto9ll]

the threaded insert in my crickets shroud , that the barrel threads into is loose and spins...any way to take this shroud apart and re glue the threaded insert?

[@gegezzzzz]

Will the original factory constant pressure is 1000 PSI ?

[@hsnmzpak6730]

can a tester be made for Fx regulators ?

[@vvs11fh]

Do u know where can i get this gauge that can measure the regulator ?

[@AKWAITI]

I have a question if you do not mind ... How can i adjusting the power for my cricket .... through the air regulator adjusting or the Hammer Spring...Which is better, do you think...thank you my friend

[@everythingairgunninguk6954]

Hi Mr Rowe where can you get these reg Testers from which your using has the one your using can accommodate all different regs. Are they self made by yourself or can you purchase the same type has yours has I live in the UK and they don't have that type let me know thanks

[@wujie75125]

Hello, may I ask ED5.5MM air rifle, constant pressure valve set how much pressure fit, please tell me, thank you

[@koplandavid]

how low can you go on this one ? would need 100 - 250 psi range

[@gmsantafeairgunner2169]

Great video easy to understand is that a external or internal regulator also have you heard of a company called Huma that sells regulators I have an unregulated air gun aea 25 Cal I want to add a bigger tank I found one I'll be changing out the $450cc tank to 700 carbon fiber tank also I want to put a regulator on it external and I found one from Huma it's out of the country but I want to know if you know too much about them if they are good regulators and if it is a legit company great video thank you for that video

[@lesthompson5907]

can you splays a regulator to operate on a new designed air rifle. porter tip break barrel, which is operated By a hammer simpler to that of a hammer that is used on a firing pin . ? > the air chamber will screw in to the read of the springer, But the regulated air will travel down a fine drack pipe. to the exist point on the . barrel. ? still in the design stag any idea's ?

[@Rendicor]

Hello Ernest. How can i syncronize the hammer spring, the valve spring and the regulator? in order to obtain a speed of 890 fps i have to set the regulator on a pressure of about 130 bar, but how i have to set hammer spring and valve spring? thank you veru much and sorry for my english.

[@user-zw7hb1yj2v]

I want to get a complete set of valve! Will you help me？

[@mea1230]

great video Ernest! I made one testing cylinder like the one you have here, my problem with it is when i bleed the air supply, the air in the tester will bleed too. are you using one way valve fitted at the bottom of the tester? Thank you

[@ernestrowe6974]

yes!!!

[@mea1230]

Ernest Rowe do you have links for the fittings you are using in this tester? one way valve? I dont like the idea of leaving the tank hose connected all night long. Thank you.

[@busa_rider_cy4012]

from were can i buy this adjusting tube? thanks

[@PeakyBlinder]

what pressure for 12fps

[@richardwallinger1683]

Nice home made tester .. I need to make one for my FX Bobcat regulator .939fps then after 640fps . what am I doing wrong.

[@bmtango05]

So how do we get in contact with you to have you tune? I tried pm you via TAG but no reply?

[@antoniodicappo403]

Hi there, can you supply schematics so that I can make a regulator like this for my airgun? I'd appreciate that, thanks.

[@PeakyBlinder]

why does it have to be bang on 120 psi

[@keithwilliams8807]

May I ask where did you get the regulator tester from

[@ShayanQuanta]

Ernest Rowe barley reply comments! you can find here?> www.huma-air.com/Huma-regulator-tester

[@ricardoreme]

Hola donde se puede comprar

[@muhammadisrarmuhammadisrar8540]

How are you sir I need regulator tester for vulcan air gun pl help

[@peterreid6446]

Luke mm

[@PeakyBlinder]

890 fps wtf we got 12 fps

[@ikke238]

You are mixing fps and foot pounds. Fps > feet per second > pellet speed

[@vvs11fh]

Do u know where can i get this gauge that can measure the regulator ?