Рет қаралды 396
Here's the b-roll to the actual crawl. Packing out; I came across this beautiful little scale stream- run off; a bit of paradise. I got the gear back out and took some extra scale video..., no hands used. I believe the biggest issue next to the soft muck., was the large rear bumper/ rear running board was acting as an anchor in the mud/ sand.
One of my favourite local spots.., was able to find access to the other side of the creek (with out getting wet:). Was a very windy morning but the camera did surprisingly well, audio wise.
Cross rc demon got at a cheap price locally. Was unpainted and missing a lot of parts. I decided to ditch the rear flatbed and use a rc4wd hilux bed. Also it came with out the interior metal cage…, it’s cog is WAY lower than what I remember with my last demon!!!
Sanded a few body lines out of the bed. I painted and weathered it out. Added the trx4 sport utility cage . Upholstered the seats and went with a metallic looking dash/ floor.
Still not liking the red hood…, not sure if it’s the tone?
Also feel it’s missing a rear bumper. Not a fan of how high the rear looks…, better for clearance tho…
Was able to get it low enough to run small 3.8 Rc4wd 1.55 bfgs. With stock foams they are a squarish looking tire., larger foams give them a rounded look (increasing the size closer to a 3.9) .
Modded to put the servo on chassis
Nathan drake as a driver
Issuing the cheap 1060 or 1040 that came with it.
Cheap 450 35t motor
SSD 1.55 beadlock
Rc4wd 1.55 bfg m/t km2
KZbin music no attribution required
July by John Patitucci
/ @johnpatitucciofficial