Crown 👑 Satin Finish, Hint & Tip..

[@paulf2529]

Owatrol is farr better than turbs, does not ruin the shine. A small splash is all you need.

[@Liverpool1ne]

Hey Candleman here’s an idea - paint the plots then offer to clean them afterward for 💷💷🤔

[@jsj381]

We used to put weathershield high gloss into exterior undercoat painting the train station waiting areas they never noticed.

[@TheOlzee]

Could you do a vid on how to take these rads down safely etc?

[@badmutherfunster]

Ive gone back to plots after cleaning and they have vacuumed the tops of skirting and made a black mark from the pipe all around the room (every room) and think that's acceptable

[@skaterguy52]

Think mr mrs learned to clean at the same school as they site cleaners 😂

[@kennethmunro7480]

Dulux quick dry undercoat dys with a sheen cracking gear 👍👍

[@wallingtonfilming]

I know, but my bosses won’t pay for it 🥲

[@kennethmunro7480]

@@wallingtonfilming nae luck mate get the aki on it. I do that satin wi some gloss in it wee starter for 10

[@orbitalforest]

I use Owatrol oil in my gloss , always get a great finish with it , i haven't thinned with Wyatt Earps for years. Spot on about cleaners Mark , they don't fit the job description as they do their utmost to avoid any cleaning.

[@ljcooil87]

I use owatrol aswell, only downside is I noticed it makes the gloss yellow that bit quicker because more oil.

[@orbitalforest]

Can't say i've noticed any difference to be honest , i think it's much more dependant on how much UV light get's to certain areas , we tend to re-dec every 2 to 4 years due to high turnover of new tenants on the contract i work on and the owatrol houses look no more yellow than the one's where its not been used.@@ljcooil87

[@chazboyle9456]

i agree if you use emulsion on wood work then when it comes to sanding it down prior to glossing its not the same as using oil based undercoat , in my day we weren't allowed to spray emulsion to new build houses , only roller on ceilings and walls , i worked on a site and the agent was a right pain this guy didnt sit in his office he was out on site most of the day , he wanted us to give the doors 2 coats of gloss and flats of facings as well , and he could tell if you didnt , he won best site for scotland on that site , but we could hardly make any decent money

[@wallingtonfilming]

If you don’t make money 💰 on that site, you shouldn’t have worked on it. nobody, including myself, paints a topcoat on emulsion on woodwork

[@nige.3494]

We used to have a Clark of works who used to run his hands down the woodwork if he felt anything he make you sand everything down and do it again proper stickler for detail

[@misterC4P]

what sprayer do you use? is there a vid you made on it? many thanks

[@derekcurriecurrie1609]

The hardest game on a site painting plots . The hardest game to earn money from with a brush...painting plots 😲

[@bartley7953]

Satin should always have two coats even if it going on a oil based undercoat , it will definitely will need two if its going on a water based one .

[@Liverpool1ne]

Was going to say similar. A two coat paint doesn’t become a one coat paint because the job needs doing quicker or cheaper. I wonder why they don’t ask for WB satin which would go for two in less time and presumably give a better finish than one coat of OB satin. Not a decorator just my thoughts based on what I’ve picked up on various KZbin channels.

[@JohnMartin-oh6bf]

It’s true what you say about cleaners…been a painter now for 35 years but took a job at local shopping centre as a cleaner. I’m the only fella with a bunch of women and they always whinge if they have to clean something (which of course is the job) Makes no sense.

[@deansmifh4864]

The plots are a shit hole when we start. Then the cleaner takes the glory 😅😅😅

[@deansmifh4864]

But the way around it is.......if the cleaner moans say ok but when you leave a Hoover scratch mark we can complain too!!!! No come backs😆😆😆😆😆😆

[@SalasBeida]

Can used in door 🚪

[@richardmcdougall233]

Acrylic primer undercoat is porous. Johnstone Aqua under coat and other brands versions have the appearance of oil undercoat and top coats glide on far better.

[@wallingtonfilming]

BUILDERS and bosses won’t pay for the good stuff mate

[@richardmcdougall233]

@@wallingtonfilming So true , l never seen a poor house builder yet 🤣

[@gazza8596]

Aqua water based is pretty decent like I agree with you there I mainly do Voide council houses now and for old nicotine stained woodwork crown full gloss oil based is a god send covered most trim in one coat so it dose no tried the satin

[@Happy_Limpet]

.. They normally wanna clean an hour after starting top coat ..starting with the broom .

[@markporritt9569]

I beg to differ i spray my doors with accy and use crown gloss and the finish and shine i get is unbelievable never look flat

[@wallingtonfilming]

Crap 💩😅

[@gazza8596]

Would really depend on the doors wouldn’t it haha some are crap and sook everything in some don’t and give of a good finish

[@richardmcdougall233]

Maybe depends on the brand acrylic primer. Some more porous than others

[@davidsmalley8783]

Forever trying the contra charge woe is me trick

[@stuartmedhurst6613]

When has a cleaner ever been a trade

[@jameshutchinson3452]

Just keep two gallons of spirits, let them settle, pour the clean off and bin the waste. Not difficult…

[@pompeyjim]

You ever used crown extra matt? Found it to be shit

[@wallingtonfilming]

No mate,

[@PaulMacculloch]

Hi mark how you getting on me old mucker

[@wallingtonfilming]

Living the dream 🛌, who is this? 🕯️🐝

[@PaulMacculloch]

I used to work with you doing the house bashing making a fortune in Leicester ya fighta 😂😂

[@davidsmalley8783]

Take tapes of an back in van basically Boot marks scuffs get left Moan moan moan

[@davidsmalley8783]

Let’s face it satins flat as a fart after a week anyway

[@nelzy86]

Crown is possibly the worst thing ever created, horrible stuff

[@gazza8596]

I love crown haha 😂

[@richardmcdougall233]

It's the marmite of the paint industry. Personally l fine Johnstones far superior across the board bar couple products. Cheaper 2👍

[@nelzy86]

@gazza8596 u must be mad mate 🤣

[@samuitimes]

Crown fast flow satin is ok to be fair

[@nelzy86]

@@samuitimes never tried the satin to be honest mate