Lower Joint Replacement Nissan Titan / Armada

  Рет қаралды 50,258

BackYard Tech (Crownedroyal2003)

BackYard Tech (Crownedroyal2003)

Күн бұрын

Пікірлер: 45
@v12alpine
@v12alpine 3 ай бұрын
You saved my butt with the air chisel trick and it dropping right out. I was about to throw in the towel til I saw this.
@notfamousprepper7369
@notfamousprepper7369 Ай бұрын
This helped me today on 2012 Infiniti QX56 (QX80 style before it became QX80). Thank you!!
@misterbulger
@misterbulger 4 ай бұрын
Great video. Happy to see it wont need the full control arm. Im already doing the uppers and the CV axles.
@poorlifedecisions5357
@poorlifedecisions5357 3 жыл бұрын
So basically give everything a love tap. 🤟
@isaacd5845
@isaacd5845 2 жыл бұрын
Do I need that C clamp to get the ball joint back together
@xugg
@xugg 4 жыл бұрын
Thanks for the video. Very similar to Frontier/xterra too.
@archerpuna3888
@archerpuna3888 3 жыл бұрын
Mahalo you make it look easy
@juanrrobledo89
@juanrrobledo89 2 жыл бұрын
It sure gave you a headache trying to reinstall the ball joint, but great step by step, Thanks
@slappinbass9382
@slappinbass9382 2 жыл бұрын
Great. Upper/Lower Balljoints, Outter/Inner tie rods, and CV's are on my list to do this monday. That lower ball joint looks like a B****...
@slappinbass9382
@slappinbass9382 2 жыл бұрын
If all else fails and I end up throwing things, couldn't i just use a hammer and a balljoint cup to install that new lower balljoint?
@jessehoffman4361
@jessehoffman4361 2 жыл бұрын
What were you doing with that compressor? Seems like yoi were struggling with it
@billschafer4087
@billschafer4087 7 ай бұрын
Did that tighten er up or did it still sound like it was falling apart on bumps n potholes? From Michigan 😅
@crownedroyal2003
@crownedroyal2003 7 ай бұрын
Fixed the loose ball joint. Still had to replace the blown strut to make it sound better.
@v12alpine
@v12alpine 3 ай бұрын
I ended up replacing the whole arms since the inner bushings were all toast. Most of the noise comes from the inner bushings letting loose.
@bertings6372
@bertings6372 Жыл бұрын
Thank you sir!
@coruler32
@coruler32 3 жыл бұрын
Thankyou
@thesnapper84
@thesnapper84 3 жыл бұрын
Rock out with your “Ball Joints” out!
@betocastaneda29
@betocastaneda29 Жыл бұрын
oh my god, I see that you removed the control arm very easily from the Axel of the 4x4 and from the joint 🤔 and I suffer to remove it 😫 and what I realized is that you don't remove the bolt from the shock absorber, damn thanks for the video, greetings from Dodge city kansas 🤟🤟😎
@alexanderproefrock8721
@alexanderproefrock8721 3 жыл бұрын
Think this the same or similar for a 13 Infiniti qx56?
@crownedroyal2003
@crownedroyal2003 3 жыл бұрын
I would suspect it would be the same.
@dwanewalker52
@dwanewalker52 2 жыл бұрын
It's the same
@olmanluque1841
@olmanluque1841 2 жыл бұрын
$$ labor time?
@clydeharris775
@clydeharris775 4 жыл бұрын
I’ve been looking for a video like this. 2 part question, how did you get the bolt out of the spindle/knuckle? Mines just spins. I got the nut off but the bolt isn’t coming out. Is the bolt completely threaded or do I need to just hammer it out after I’ve taken the nut off?
@crownedroyal2003
@crownedroyal2003 4 жыл бұрын
The bolt should hammer out. No threads on the Spindle.
@clydeharris775
@clydeharris775 4 жыл бұрын
Awesome! Thank you for the information.
@stevenrioux174
@stevenrioux174 3 жыл бұрын
Just beat it. Wd40 rust penetrator works great.
@armlock6
@armlock6 3 жыл бұрын
"Ball joints out."..lol!
@johnsquire1019
@johnsquire1019 10 ай бұрын
I think that you should have cut off the lower portion of the ball joint and then used the ball joint press
@glenwhitestofer6420
@glenwhitestofer6420 5 ай бұрын
Or just get the proper ball joint press adapters
@patricklewis9776
@patricklewis9776 2 жыл бұрын
No torque specs ????
@mattsinn9518
@mattsinn9518 Жыл бұрын
Shocked the upper joint didnt spin whem removing the bolt lol
@TonyOrtiz-e4m
@TonyOrtiz-e4m 9 ай бұрын
It looks like you tore the boot cuz you're supposed to use a different install on the bottom
@alanrideout6044
@alanrideout6044 11 ай бұрын
Customer will be back in 6 months for a wheel bearing
@iShockGamers
@iShockGamers 8 ай бұрын
06 Titan. Every single size he said was wrong for me
@hermosisisimo
@hermosisisimo 8 ай бұрын
So what size you use
@marlon0179
@marlon0179 2 жыл бұрын
So the press isn't needed for extraction. just insertion. talk about a persuader.
@4589scott
@4589scott 3 жыл бұрын
Yikes!! And I thought GM ball joints were bad?
@billschafer4087
@billschafer4087 7 ай бұрын
I haven't replaced one in a 120k on my Titan.
@thejetblackwings6682
@thejetblackwings6682 4 ай бұрын
@@billschafer4087finally replacing the ones on my 04 titan at 196K
@johnbutler8689
@johnbutler8689 3 жыл бұрын
I started to watch a video as soon as you started to love tap that bolt I was through watching your on knowledgeable crappy work I would like to know how you got the nuts back onto that bolt tip if anything you should have put the nuts back on the end or even double made it and then smack it a little bit after you added some PB blaster on everything Just my opinion have a good day
@greenhometony
@greenhometony 3 жыл бұрын
And..... you don't know what you're talking about..... there we go.
@GormanRepairs
@GormanRepairs 3 жыл бұрын
That particular bolt you're talking about has a pointed tip on it , so he could beat the shit out of it ith his love tapping hammer and the nut would thread right back on still
@crownedroyal2003
@crownedroyal2003 3 жыл бұрын
Thanks.
@fuku2bitch
@fuku2bitch 2 жыл бұрын
I beat the new one back in.
@travisadams1361
@travisadams1361 2 ай бұрын
How many times u been divorced? Lol
How To Replace A Lower Control Arm On A Nissan Titan/Armada
26:26
Ry the car guy
Рет қаралды 52 М.
One day.. 🙌
00:33
Celine Dept
Рет қаралды 78 МЛН
1% vs 100% #beatbox #tiktok
01:10
BeatboxJCOP
Рет қаралды 28 МЛН
How to Replace a Ball Joint (in depth, ultimate guide)
16:12
ChrisFix
Рет қаралды 2 МЛН
Nissan Titan Axle Bearing & Seal Replacement
15:50
Aaron Hines
Рет қаралды 134 М.
2005 to 2010 Honda Odyssey lower ball joint replacement.
24:20
BackYard Tech (Crownedroyal2003)
Рет қаралды 59 М.
Nissan Titan Exhaust Manifold/Header Replacement (2004-2015)
19:01
Aaron Hines
Рет қаралды 255 М.
Top 5 reasons why the suspension knocks | AUTODOC tips
8:14
autodoc.co.uk
Рет қаралды 1,5 МЛН
How to Fix Car Noise When Turning (CV Joint and Axle)
4:04
Scotty Kilmer
Рет қаралды 2,8 МЛН