CRSF nano binding/firmware problem FIX | CRSFshot fw update

Cant you bind your CRSF nano after you updated the TBSAgent in your module? Cant you push the new firmware to your crossfire receiver? follow my proces and you will be able to fly again in just a minute :)

[@hanfpv3093]

Someone give this guy a medal🙌

[@ChrisLeeX]

This was the only documentation on how to update the nano receiver. Not even the TBS site had it. Thank you 🌟✨

[@spaglFPV]

Thx for the comment Chris :)

[@StacemanFPV]

Dude!! You are awesome! I would have never been able to bind my receiver at all if I had not stumbled onto your video! THANK YOU!

[@tomsop]

I watched several how to bind nano rx and this video nailed it. Solved my problem. The only thing I would add is I was about to give up because I did not think the firmware update was happening - I must have waited 30 seconds and then I finally got the rapd green and the flashing yello on the module and I knew then I had success. The rest of the steps followed the video really well. Thank you so much for this post.

[@spaglFPV]

Thanks for the comment :)

[@peterpichler5766]

Thank you soooo much for showing exactly how the various blinking patterns have to look like before proceeding to the next step!

[@spaglFPV]

thanks for watching :)

[@netocastor8796]

Just awesome, 2 days trying to fig this out and nothing, just frustration until i run into this video. Just awesome and easy instructions, thank you so much bro, cant thank you enough.

[@piratec6291]

I have been looking so long for the fix to the issue. thanks heaps, you have a new happy subscriber! :)

[@Ricklatrick]

Thanks to you, I sprained my hair trying to update the menu... It worked right out with your push-button method! 👌

[@Jpilgrim30]

This’s is why I really love the full version of the crossfire TX. Having the screen on the module really makes things a lot easier. Plus, I really like the spectrum analyzer that’s built in and allows you to check the noise floor at any site you go to fly.

[@xPureL]

After hours trying... found this video... and it's fixed in 3 minutes. You are THE man! Thank you! Safed my weekend :D

[@spaglFPV]

Im glad I helped u sir :)

[@jimmac]

Good'ol buttons, none of that screens & menus BS :) Nice vid.

[@MrKnifington]

Thanks for the help it reminded me of binding an xm+. every other video I saw said just go in to agent x but you solved my problem, thank you 🤙🏻

[@spaglFPV]

Thx for the comment, glad I helped u :)

[@alexprohaska2705]

O you glorious bastard. Lmao you are my savior. Been trying to figure this out. I got most of the way there but couldn't find anything that walked through this procedure. You sir are a saint and hero.

[@spaglFPV]

Im glad it helped u, thanks for the comment, it makes me feel like it worth spending my time to do vids like this one :)

[@ermannobona2755]

Grazie a questo video ho risolto in parte il problema, complimenti perchè parli di cose che potrebbero sembrare scontate, ma non per me. Iscrizione meritatissima, complimenti.

[@evgeniylarin4224]

Thank you so much bro, i've spent hours trying to solve it!

[@bigbellyflyer]

Thank you this works, I was having a hard time with my radio master T16s , found this video and got it done!

[@spaglFPV]

Thanks for the comment! :)

[@maximtikhonov1479]

Thanks! This really helped, I was pulling my hair out! The only difference is that I have Tango 2, so it doesn't have bind button on transmitter. So basically what I did is: 1. power on Rx (blinks green slowly), 2. power on TX, enter binding mode 3. after this RX blinks red slowly 4. Single press bind button on RX. 5. TX offers to update! So I guess you can confirm update using RX button as well

[@maximtikhonov1479]

Watched 10 videos, and this is the only one which pointed in the right direction. To clarify for anybody having the same issue: TX firmware 3.53, RX labeled "XF nano 44"

[@7LETITBE7]

Hey Max, i tried this on mine and nothing happens i don't get red light blinking in step 3 as you said. I tried everything, literally don't know what to do now

[@maximtikhonov1479]

@@7LETITBE7 well, may be you have later firmware on rx, and it behaves differently? Sometimes I had to restart my tango, before entering binding mode. It’s weird, sometimes it works quickly, sometimes it was finicky, but then worked after few restarts. But I still use the same process

[@imager09tube]

Thank you very much Spagl. Excellent review and troubleshooting tips.

[@spaglFPV]

thanks Mantis :)

[@darwinmounsey376]

awesome dude you helped my out big time!!!! thanks a bunch! happy flying

[@spaglFPV]

Thx for comment, glad to helped u, happy flying! :)

[@MrLootshoot]

Brilliant stuff, liked and subscribed👍

[@don83030]

You are awesome man. It works like a charm. Thank you

[@spaglFPV]

Thanks for letting me now it helped u :)

[@skyraft7181]

My god ... i went through hell until i found your video. TY !!

[@spaglFPV]

THX for the comment, glad to help u :)

[@richierich142]

You are a LEGEND!!!! Thank you. Subscribed!!!

[@spaglFPV]

thank you! :)

[@lareno7878]

Thanks for the help man.

[@spaglFPV]

I thank u for the comment! :)

[@timmichalchuk5134]

Nice quick to the point and clear thank you

[@spaglFPV]

Thanks man :)

[@egtreadway4232]

Thanks, you have a new subscriber I'll give this a try tomorrow but I'm having bad time trying to update my nano with micro tx v2.

[@spaglFPV]

Thank you! :)

[@danielmayhew6714]

This actually works for me 👍

[@loicsvoboda1616]

many thanks, so helpful :)

[@kciukj]

you made my day

[@nomnomfpv3136]

This was seriously more helpful than anything I could find through TBS or Joshua Bardwell. Thanks man! Any idea why the luac script doesn’t seem to work when bonding to this new version? I’ve never had this issue and ran across your video and now I’m in the air

[@stickboyfpv4742]

Niccccce bro! Thank youuu! I thought it was impossibllle without ising the app😅!

[@doktordrone]

My nano radio and TBS are bind but cannot be read by FC, is there any damage to the receiver? thank you and happy weekend 🙏❤️🍺

[@TristanCastleArt]

Absolute legend!

[@spaglFPV]

Thank you! :)

[@paulortic]

je ti dobře rozumět 👍

[@superseaner]

Awesome vid thanks 🙏

[@spaglFPV]

THX for comment :)

[@sebastianvargas5434]

Bro eres un genio, casi me rompo la cabeza buscando la solución a este problema

[@Tiber_FPV]

Thank you so much bro 🙏❤️👍problem solved 💪🔥

[@spaglFPV]

U are welcome, thx for watching :)

[@dimosthenischristopoulos2606]

Thank you!!!

[@Bicca1288]

thank you very much!! Very helpful for me!

[@spaglFPV]

thanks for your comment buddy :)

[@twostep7189]

@@spaglFPV hey man i just updated my micro tx to the latest version and my open tx my nano will be in bind mode slow green blinking, ill press the orange button on tx to make it blue, i will flash the new version, it will blink green fast when done then i reset both devices and they will both be in bind mode but not binding together?

[@creamfpv5682]

Omg I was ready to trash this rx hahah thanks bro . super helpful 🙏 u da man 😎

[@spaglFPV]

Thanks man :)

[@bennymoralez]

thank you!

[@minkorrh]

Perfect! Thank you!!!!!!! :))))

[@spaglFPV]

U are welcome mate :) Thanks for the response

[@austntexan]

Having issues with a Sixty9. Wish this video helped my specific issue. I get a solid green + fast red and I cannot get it to bind or even go into the supposed "Emergency Update" mode to access the "golden" firmware to reset. TBS is such a PITA. I'm seriously considering switching everything over to ELRS at this point. It shouldn't be this difficult.

[@universerc7045]

Oh thank you man!!! thank you very much from Israel !

[@spaglFPV]

Im happy I helped u mate! :)

[@twostep7189]

expect mine just keeps bouncing green how can i fix this

[@gregorydahl]

This worked three times and three times again when i had to bind recievers over to fix the region lock . But now i have a reciever that turns solid red everytime no matter what binding method i use .

[@Harrybaallz]

Thanks, alot

[@chachafpv2580]

thank you

[@7LETITBE7]

Has anyone had issues binding to tango 2? i cant bind my flywoo explorer to tango 2, tried everything already

[@CR2d2]

Thx man I use this over an over lol

[@spaglFPV]

U are welcome, Im glad it helped someone :)

[@limitsizyasam3891]

Hello mate, which firmware did you update ? and how can I use one shot ? is there anything should I do for one shot ?

[@123zabor123]

you legend

[@twostep7189]

i just updated my micro tx to the latest version and my open tx my nano will be in bind mode slow green blinking, ill press the orange button on tx to make it blue, i will flash the new version, it will blink green fast when done then i reset both devices and they will both be in bind mode but not binding together?

[@janw.5726]

have that problem too did you manage to fix it?

[@mobilly6842]

when i press the blue blinking light to give permission to update, it starts blinking green again

[@MrOrangeman18]

Did not work for me. The rx just flashed and the module flashes green also but just won’t bind up. Running 4.03 firmware

[@CarbonGlassMan]

My crossfire nano receiver just has a solid green light. Pushing the button doesn't change it.

[@kleinkariert7473]

Thanks very much! That saved my Ass. I was about to getting really really angry 😁

[@Caysonator007]

CAN SOMEONE PLEASE HELP ME. I am stuck at 2:04. When we push the blinking blue button, instead of turning solid blue, it turns back to blinking green. And the red rx light somewhat changes to a sort of slight double blink. Can anyone please tell me what to do or what I’ve done wrong. I’m a dummy.

[@fpvnycdream_4197]

I’m getting blinking green on transmitter and crossfire but it won’t bind. Even though it’s in binding mode.. what should I do ?

[@playcss1992]

try it again! I did not work for me aswell in the beginning!! greets

[@libor-vitek]

Člověče, nevím, co sis tuhle stěžoval na svou angličtinu. Za mě docela cool ☺. To někteří mí kolegové na vedoucích pozicích klidně řeknou třeba "they was bended" a ani se přitom nezačervenají 😎😁

[@akwel4816]

Help please ! At 2m03, my TX goes straight to blinking green instead of solid blue, and my RX stays blinking red, nothing else happens, any Idea why? Thanks

[@waldenrooijer5084]

Form me two Any help here?

[@rid3withthewindvaj131]

Have you try long range with it? I got crossfire shot too, but I was just curious if its good for long range too. Thanks for your video.

[@spaglFPV]

Hey mate, Im currently nust training indoor racing so my max distance with crsfshot was like 200 metres max, but I believe the range will be enought even for some crazy longrange stuff :)

[@JeromeDemers]

@1:16 you have to hold it 10sec when it blinking green really fast. Not 5sec like you mentioned. Thanks

[@bnewfpv6629]

I can’t pass in bind mode when the led is green and not blinking. I follow the instruction but it doesn’t work ...

[@spaglFPV]

check ur receiver, if it changes the color/blinking once u turn off the transmitter, then it already communicates, if it doesnt change the state then you have to bind it

[@playcss1992]

what a fucking legend!!!!!!!!!!! I THANK YOU SIR !!!!!!!!!!!!!!!! GREAT JOB

[@user-jy3dw9dd6x]

sorry,I tried waht you do in the video,but it still doesn't work,I have upload two videos in my channel,if you have any solution,I apperciate it.

[@egtreadway4232]

I've been hours trying this solution but still no go, everything works the same as you except at almost at the end of update the rx starts flashing red and green at same time, I've tried firmware from 3.78 to 4.03 but same results each time. Any help will be appreciated

[@dollarbutt]

Having the same issue. Video straight up did not work for me. Got both in bind mode, but they won't connect. Ideas?

[@egtreadway4232]

To be honest I'm very disappointed in crossfire, I've submitted ticket with crossfire and sent video and purchase information but still no go. Does yours also flash red and green at same time at the end of update? What does this mean it's not even in crossfire manual.

[@dollarbutt]

@@egtreadway4232 I'm reporting mine DoA. New one arriving soon.

[@SirCrashaLot]

oh yeah I owe you a beer

[@spaglFPV]

just give me another nice air fight on some FAI again :)

[@WillyFPV]

Thanks it worked! Both are Green! But why does my haptic feedback keep buzzing intermittently on my Qx7

[@spaglFPV]

Im glad it helped u, about your beeper, cant u just adjust it in the menu of QX7?

[@WillyFPV]

@@spaglFPV still having an issue. My micro tx and nana diversity rx are binded to 4.1 luas scripts are on the sd card in qx7 and when I execute crossfire it will continue to say waiting for crossfire. and tips?

[@spaglFPV]

@@WillyFPV i would format the SD and reflash the radio, then update crsf modul to latest stable version and let the receiver update

[@WillyFPV]

@@spaglFPV so does formatting the sd card mean to start over?

[@AlexeySLK]

Спасибо!

[@mhersarkissian1806]

i tried this method but now my nano Rx receiver light is not working .. no red light no green light.. can anyone help me with this please ?

[@spaglFPV]

Measure your input of rx with voltmeter, it probably isnt powered, if there is 5V, then it could be damaged/fried

[@chrisburton6524]

Hey, unfortunately it doesn't work for me. Up to minute 2 everything is fine but if you press the flashing blue and he should have blue lights for the updating, he jumps back to the pulsing orange, the RX continues to flash red.

[@spaglFPV]

Hey, what version of openTx and TBSagent u got in your radio?

[@chrisburton6524]

looks like a fw 3.2.8 issue. with 3.2.5 it worked

[@michael3573]

@@chrisburton6524 3.2.9 issue too. I'll downgrade to 3.2.5 thanks

[@kbw940]

Friend!, excuse me, but my RX nano don´t blink same you, blinking green fast!! and i can´t change that. Can you help me?

[@faktalist]

Same issues,

[@IvanCazorla21]

@@faktalist same here. any way to fix this??

[@faktalist]

@@IvanCazorla21 exchange to TBS

[@thibautschoeffel5171]

Sadly this still doesn’t work, both systems are in binding mode but it doesn’t bind…

[@beckettrj]

Ditto! Give him a metal!

[@RealKushrage]

not working for me.... :(

[@Maorifpv]

Thats why i changed to tbs crossfire , is so simple 🤣😂

[@sarah.dxv3]

doesnt work

[@twostep7189]

you find a fix yet? mine both will blink green after this but not bind

[@faktalist]

@@twostep7189 same too my problem

[@clay09]

doesn't work. nothing works. always stuck with solid green.

[@opticzfpv597]

I had the same problem reflash your crossfire module to the last stable version then rebind the receiver allowing that to update. Then reflash to the new crsfshot again then rebind and it will work. Sometimes if your on to old a version the reciever for some reason wont jump with the module to the latest firmware so I found flashing to the last released stable version before the latest realise and binding then updating works. Best of luck bro 👍

[@opticzfpv597]

And make sure your open tx is 3.2.5 👍

[@twostep7189]

@@opticzfpv597 do you mean 3.2.5

[@opticzfpv597]

@Rainy Days sorry open tx companion 2.3.5 typo didn't realise man apologies 🙈

[@clay09]

@@opticzfpv597 turned out mine was physically damaged, a couple resistors broke off. apparently according to tbs, if the green light is solid and the tx is not even on, there is a bad hardware issue. I had damaged 2 nano's this way before finding out. They were ripping off with the blue tack stuff i use to hold it in place while soldering.