CRusty Honda CR80 Restoration - Part 2

[@cxbra]

Great job 👏🏾

[@alabama389]

Nice! Where did you order the plastics and tank?

[@venturidesign]

thanks, the tank l found online brand new in Holland of all places from a private seller, and the plastics came from an online ship called motardinn, based in Spain l think, the tank including shipping to me in Australia was close to $400 and the plastics were around $200.

[@MchooChoo2]

Awesome build mate. I need to do the same to mine. How did you get the forks so shiny ?

[@venturidesign]

thanks, bench top wire wheel cleaned them up a treat.

[@benschlack5814]

Nice love 2 strokes

[@quadirbeonit29]

Do you know you crab settings? Main,pilot,needle,air fuel screw?

[@venturidesign]

Float level at 19mm Temp 15 - 27* C or 59 - 80* F Air screw 1 5/8 turns out Pilot 50 Needle at clip pos 2 Main jet 125

[@michaelburke4262]

Fantastic! What year YZ is that?

[@venturidesign]

thanks, its a 2000 yz80

[@L.Korpela]

Is this the 1996 cr80r? If so i have exact same bike

[@StevenReaves-d7g]

I wish I could learn how rebuild a CR or any bike😢

[@Namedeeznuts]

It's easy. Only problems you will run into are busted parts and trashed threads. Gets expensive quick!

[@brocky_8]

How did you make the seat template for the CR ??

[@venturidesign]

Hi Brock, I printed it out to size on a laser printer, then traced it onto some clear contact, I then used a scalpel to cut the clear contact, hope this helps. kzbin.info/www/bejne/d3fPhJ95hsmVe6c

[@Superjeap]

Well looks like a CR85 according to the engine at 6:56 - 85cm3

[@venturidesign]

yes it is now, originally this model was an 80cc, actually 82cc or there abouts and officially went full 85cc in 2003, but yes you are correct this particular 2001 model is now an 85cc.

[@kingj728]

Hey man, do you think we could chat? restoring a CR80RB and it's my first bike.

[@venturidesign]

sure what do you need to know?

[@kingj728]

@@venturidesign where did you source your parts?

[@venturidesign]

@@kingj728 Mostly Ebay and market place, brand new tank from Holland was the most expensive, new plastics from matardinn a lot of parts just cleaned and restored and a few parts bought 2nd hand locally through FB Marketplace, hard to find but eventually things show up, good luck!

[@АнатолийГуськов-ю1щ]

who knows what the piston and ring are suitable for, if not the original!

[@jagitmax]

so you didnt bother to rebuild the motor , I guess that's why all the extra smoke.

[@venturidesign]

motor was totally rebuilt just wasn't filmed