Cutting fresh grass for the first time with Husqvarna 535 RX brushcutter.(Motocoasa Husqvarna.)

[@laszlopap19]

Gyönyörűen viszi 👍🥇

[@CsabiTools]

Hello, igen nagyon jo kis gep,🙋‍♂️

[@laszlopap19]

@@CsabiTools Az 🙋‍♂️

[@stefan7869]

Great Job and very good brushcutter

[@CsabiTools]

Thanks, yes indeed very good machine,🙋‍♂️

[@rokdovecar5275]

@@CsabiTools It's 6.1kg with full fuel tank and cutting head?

[@CsabiTools]

@@rokdovecar5275 6,1 kg without full tank and cutting head.

[@rokdovecar5275]

@@CsabiTools so approximately 7kg with full tank and cutting head?

[@sirvozelo1]

I not remember if I have telling you but I have the same problem two times already on my MSA300. As you know it have 4 screws holding the plastic cap over the air filter, while taking the cap off to clean the air filter one of thoes screws just keep going and going around and I was not able to take the cap off. I take the saw to the nearest Stihl dealer witch is in Spain even I live in Portugal and they fix it but 2 weeks later it happen again, then again they fix it and say thoes screws just have to be touched not tight and if it happen again they go replace the all plastic case. Make me think isn't a so good design.

[@CsabiTools]

Hello my friend, honestly I didn’t have that problem with my saw maybe it’s a a factory malfunction , hope you will not encounter that problem again,🙋‍♂️

[@ep73rhodes83]

I would like to see a matchup with the machine and the Stihl FS 280.

[@CsabiTools]

Hello, I don’t have the Stihl Fs 280 ,🙋‍♂️

[@alexandrupuiu1985]

Fain merge!

[@CsabiTools]

Salutare, da merge super bine,🙋‍♂️

[@adrianstefan23]

Te salut merge foarte bine motocoasa !!! 👍👍👏👏🚀🚀

[@CsabiTools]

Salutare Adrian, da intr-adevar merge super bine,🙋‍♂️

[@JurajLanyi]

Sila 😮

[@CsabiTools]

🙋‍♂️

[@jvenema86]

so wonderful beautiful video friend i love it see i like talk to you 😊

[@CsabiTools]

Hello, thanks so much my friend, greetings 🙋‍♂️

[@jvenema86]

@@CsabiTools that’s really nice so cool you talk

[@user-no8yk8ti2e]

Отличная машина

[@CsabiTools]

Hello, yes indeed,🙋‍♂️

[@koleuslybra]

Thank you! How should I correctly accelerate? Keep the motor always accelerated, or accelerate everytime I swing the brushcutter (unable to understand how it`s done in the video..)? Also the new motor needs a break-in, or is not necessary anymore? Thank you!!

[@uladzislaumickewich5495]

Salitare. Alles geht gut🖐️👍

[@CsabiTools]

Hello, greetings 🙋‍♂️

[@jibeilin9544]

Is the STIHL FS460C-EM carburetor equipped with electronic injection?

[@CsabiTools]

Hello , yes indeed,🙋‍♂️

[@RichardAndAlexandryna]

Wow ce treaba buna ați facut😍🤗 mi se pare mie sau e foarte silențioasă? Și noi avem o motocoasa de la RURIS si suntem foarte multumiti de ea❤ ne-am abonat la canalul vostru🥰🤗

[@CsabiTools]

Salutare, multumesc de aprecieri, da e destul de silentioasa, usoara si merge foarte bine, cu motocoasa de la Ruris inca nu am avut ocazia was lucrez….. dar spor la treaba cu ea . Multumesc mult de abonare va salut,🙋‍♂️

[@dujeamizic3588]

Today I was using my fs 360 with knife

[@CsabiTools]

That’s great, good job my friend,🙋‍♂️

[@danielebellini7412]

Seems good csabi, do you prefer this or the stihl fs 361?

[@CsabiTools]

Hello, I don’t think I have a favorite between the two of them, what I can say that both machine works very well ,🙋‍♂️

[@pavchainsaws3405]

Salutare!Ce impresie ți a lăsat aceasta motocoasa?

[@CsabiTools]

Salutare, ce imi place la aceasta motocoasa ça este foarte usoara paractic nici nu o simt in ham este ideala sa lucrezi cu ea in panta si cu toate ca este usoara chiar are putere,🙋‍♂️

[@heineken5050]

Hello! If you have to compare it (535rx) with stihl fs 240, which one would you pick?

[@CsabiTools]

Hello, both machines are excellent but I think I like the Husqvarna better,🙋‍♂️

[@heineken5050]

Thank you very much! I was thinking the same, but still wanted a professional opinion!

[@rokdovecar5275]

@@heineken5050 so did you go for 535rx ?

[@heineken5050]

No, i bought stihl fs 261​@@rokdovecar5275

[@blagoeres]

Which trimmer is better - this husqvarna or stihl fs 250?

[@CsabiTools]

Hello, both brands are excellent, with the Fs 250 didn’t have the chance to work yet but the Husqvarna from the video it’s really a good machine and really light not that heavy, yo chose what is more suited for your demands,🙋‍♂️

[@BIGPGA]

Să mă bată mama dacă nu te înțelegea mai bine englezu în română 😂😂😂🎉felicitări pentru video

[@CsabiTools]

Salutare 😂😂😂😂

[@simonev97]

Test with the efco stark 3810?

[@CsabiTools]

Sorry but I have nothing from efco,🙋‍♂️

[@cosminstanciu9833]

Eu am efco stark 3810 super super aceasta coasa dar importatorul efco oleo mac este cam bătut în cap la noi se găsesc acum gata h și ds4000t 5300 5500 boss

[@mahbubkhan7646]

Quanto costa?

[@CsabiTools]

Hello, around 600 €,🙋‍♂️

[@atnstn]

2-stroke. Costs 600Euro ?!? What?!? A Daewoo DABC390GX costst 160 Euro and is 4-stroke, much more economical and lighter in hand. This is glorified piece of dinosaur excrement from Ancient times. Also I barely even use my Daewoo anymore frankly. I get the EINHELL 18V Grass cutter using plastic knives. It weights barely a 1kg and i cut precisely around trees. Afterwards the tang of wet soil and cut grass fills the air nicely and makes me happy. With petrol grass cutters regardless 2-stroke or 4-stroke It just smells of petrol and I don't like it. Frankly the Husqvarna is an EXTREMELY overly expensive product that frankly is not made in the EU anymore. It's made in China. So what the fluck you that premium money for?!? My recommendation? Einhell Power X-Change GC-CT 18/24 Li. You'd be shocked how good it is. Costs you nothing to service and maintain. Charge a battery and you're good to go. Battery is good for 5-10 years.

[@CsabiTools]

Hello, thanks for the advice,🙋‍♂️