Thanks, you are the best person on youtube for this type of stuff........keep up the great work
@mohamedcharchour86932 жыл бұрын
Thank you very much. I have been looking for a video like this one for a long time.
@wilvermanuel7447 Жыл бұрын
Thank you, very nice video. Glad to know that i can pair my sonoff zigbee devices to my tuya zigbee gateway.
@froilanrivero2826 Жыл бұрын
What about the opposite tuya devices working with a sonoff coordinator? Is it even possible?
@helgardmuller4523 жыл бұрын
Question. Using sonoff zigbee bridge and sonoff sensors will this run through the Tuya / smart life app.
@damianplatek2 жыл бұрын
Aparently no. But Im still working on it.
@petersovakopernicky90503 жыл бұрын
Great work. I'm just looking for some sensor which will send notification, when garage door is open for more than 5 minutes, and here we are
@csongorvarga3 жыл бұрын
Very good point. That is a wonderful use case I did not thing about before!
@petersovakopernicky90503 жыл бұрын
@@csongorvarga Well, create video, hopefully it will help somebody else. Thank you for all work you do for us. Highly appreciated
@viktorkertesz4329 Жыл бұрын
Wish I saw this video before I bought 3 Sonoff switches for my Tuya Zigbee GW. It's not working similar to this video. My Sonoff motion detector and Sonoff smoke detector works fine. Zigbee standard is a thing, we still need to watch videos like that before buying. I payed my learning money again...
@csongorvarga Жыл бұрын
Too bad the implications differs in every system.
@LeoRcCars2 күн бұрын
if someone interested the sonoff button can be used with tuya gateway but not easy way) it appears that button sends "off" state and become unavailable in 1 min. so it is possible to do some automation but unfortunately not as it is designed by sonoff)
@csongorvarga2 күн бұрын
@@LeoRcCars Thanks
@peternikolob84502 жыл бұрын
How works SNZB-03 "Due to power consumption and power-saving considerations, there have some restrictions on the trigger That is: when SNZB-03 detects the movement, it will send a signal to ZBBridge If the device does not detect any movement for one minute, once the device triggered, it will send a signal to ZBBridge If any movement is detected within one minute, the device will not send a trigger to ZBBridge. And effective detection and trigger signals to ZBBridge will be delayed for one minute. It means the motion sensor works with one-minute intervals."
@krisztianszabo37173 жыл бұрын
Thank you for this video. It really helped me out.
@alexthefox19763 жыл бұрын
Hi, good video. I can’t find other video we’re you connect tuya devices to so off hub. Can you link it? Thank you
@damichl96843 жыл бұрын
THANK YOU FOR THIS VIDEO!!!!
@thatnoone3 жыл бұрын
cool, thank you very much. very informative
@matthewanderson62543 жыл бұрын
Hey thank you very much but do you know which strobe siren will work with the new sonoff zigbee bridge
@csongorvarga3 жыл бұрын
Sorry no idea. I think it is less hit and miss what 433 MHz RF was, but I can't tell how you can be certain besides testing it out.
@masterola9133 ай бұрын
What about sonoff human presence zigbee is working with Tuya??
@GabrielEnriqueGarciaRosado2 жыл бұрын
Hola! Gracias por tu vídeo. ¿Se puede conectar el Bridge Zigbee de Sonoff con la App Tuya Smart o la App Smart Life? Gracias.
@kristianprokupek6606 Жыл бұрын
Nice video. And does Tuya zigbee sensors work with Ewelink + Sonoff Zigbee gateway ?
@csongorvarga Жыл бұрын
Yes I did a video on that too. Some worked, some not. But there is a lot of change on Zigbee for Sonoff now. With the new NSPanel pro, sonoff supports a lot more 3rd party zigbee devices.
@kristianprokupek6606 Жыл бұрын
@@csongorvarga Great. I have large Sonoff + eWelink system but some sensors they didnt offer (for example AAA batery powered, not coin battery), or thay havent more - vibration sensor, alarm siren, gas detector ... all for ZigBee. I suppose Zigbee is very specified by protocol and profiles (so it may work), but depends on chinese implementation of full Zigbee or lightweight Zigbee... . For example vibration sensor I cannot pair with ZB GW, with latest firmware 1.7.0 (comes few days ago)
@csongorvarga Жыл бұрын
@@kristianprokupek6606 Yes I noticed the same. If Sonoff supports a type of sensor, other sensors from other brands will work as well. For example a zigbee radiator themostat does not work as they have not implemented that profile.
@butterfly_free3 жыл бұрын
hi, i have to unit of th16 with no light and wifi out. how can i make and hard reset for this unit. thanks zeev
@prasadrs100 Жыл бұрын
I try to connect the SONOFF PIR with the leadedge as100 zegbee hub but the device is not detected I am using smart life APP can you please give me some support?
@csongorvarga Жыл бұрын
You are trying to pair the Sonoff Zigbee PIR sensor right? If it does not work, I don't have any ideas. Make sure it is in pairing mode (long press the reset button until the faint LED starts blinking)
@Roupjumping3 жыл бұрын
had the same issue with batteries, but in ewelink all is good. so the problem in interpretation itead device in tuya
@AntonNikitin_V3 жыл бұрын
Hi! Did you try to connect sonoff zigbee sensors to tuya zigbee gateway hub directly?
@csongorvarga3 жыл бұрын
This is what I did here.
@PVflying Жыл бұрын
Did anyone try this SONOFF SNZB-03 motion sensor with the tuya zigbee 3.0 gateway? Will that allow me to use the sonoff sensor within Smart Life app?
@mdragon882 жыл бұрын
Hi. I have a question. Is the light switch in this video wifi version or zigbee version? I think it is zigbee since it is instantly actived with the PIR detection. But still need confirmation. Help me pls
@moritzneubauer Жыл бұрын
I just bought the sonoff button and have the same Problem. I connected but there is noch function. Hoped you have a solution but I think I have ti Senf them back.
@csongorvarga Жыл бұрын
There has been a development now. You can set up a screen when the Sonoff button is pressed, and on the action side you select a light, or switch and now there is an option called "Reverse". It will turn it on if it is off and vice versa.
@moritzneubauer Жыл бұрын
@@csongorvarga okay then I will try that again. Thank you 👍
@rusmsm3 ай бұрын
Здравствуйте. Подскажите как подключить кнопки Tuya на шлюзе Sonoff zigbee?
@csongorvarga3 ай бұрын
You just push the button for a long time to get it into pairing mode. And you can add it to the Sonoff gateway.
@rusmsm3 ай бұрын
@@csongorvarga Спасибо. Я так сделал, но шлюз не находит эту кнопку ((
@krzysztofkomornicki70073 жыл бұрын
Can you please advise how to make Sonoff Zigbee Bridge accessible from Tuya Zigbee LAN Gateway (wired Ethernet version), using Smart Life Application?
@csongorvarga3 жыл бұрын
You can't. The zigbee devices are interchangeable between ecosystems, but the bridge/gateway is not (or at least I have no idea how). They run a firmware specific to these ecosystems (Sonoff or Tuya). So you need to purchase a Tuya compatible bridge if you want to use Tuya/Smart Life app.
@danilg44863 жыл бұрын
I'm just wondering, if I have both rf 433, wifi and zigbee devices and I want to combine them, can it work offline? Let's say I have a zigbee motion sensor, but I want to switch an rf 433 controlled light source as it's alarming. Or if I have a wifi thermostat and I want to control a zigbee controlled heater.... It's clear I can connect them by a zigbee bridge (gateway) or an rf 433 bridge. It's clear I can give the commands in the mobile application what to do for specific actions. BUT it is not clear, what if there is no internet connection or my phone is out of battery, etc. Are the bridges still communicate to each other? Are they still know what to do? It's important for me because I want to combine more devices, because each protocol have it's own advantage and disadvantages despite of the situation and the tasks. I'm not a professional, sorry if it's a silly question.
@csongorvarga3 жыл бұрын
It is not a silly question, and unfortunately all this need internet connection. Anything that you specify in the define in the scenes runs in the cloud. So that works as long as you have working internet connection. So the mix of 433 and zigbee will not make the setup and worse. But I am not aware of other solution which works locally. Of course there are very good DIY options, but that requires some serious learning.
@miranb85023 жыл бұрын
Hi Csongor, regarding Tuya hub and Sonoff T&H sensor, I tried to connect 2 of my sensors to Tuya hub and connected successfully. But, there is no change of temperature/humidity on both sensors., it doesn't refresh and stays unchanged. Also, sensors disconnects from Tuya hub after approx 12 hours, and stay offline until reset. Changed batteries, but the same. They work flawlessly on Sonoff hub. Can you check, if it the same with yours?
@csongorvarga3 жыл бұрын
I have to be honest, I mostly used it for shorter testing and the review. They are now connected all over the place, maybe I left them at Sonoff, I am not even sure. But I never had similar issues. The devices stay connected to the hub. I am starting to think that maybe you should be suspicious of your hub. To bad they don't show the signal strength so you can't tell if they are on the edge of reception or not. But if they work fine with Sonoff hub, I would suspect your Tuya hub is the culprit.
@jimidero2 жыл бұрын
Will the tuya light sensor work with ewelink? I ask because i want the tuya light sensor arm a sonoff device. As there are no sonoff light sensor
@csongorvarga2 жыл бұрын
I think for that reason it will likely not work. Since there is no light sensor in Sonoff, the Sonoff system is not designed to handle that data. You could probably pair it with the Sonoff Zigbee hub, but it will not appear as a valid device.
@ibramfetin002 жыл бұрын
how ??
@matussurovcak29933 жыл бұрын
Hello, does it still work in 2021? And also, did you ever try to pair the sonoff mini zigbee with tuya hub? Thanks!
@csongorvarga3 жыл бұрын
Not checked in 2021 yet, but not sure why it would not work... and no I did not test sonoff zigbee mini yet.
@ndutzzzz2 жыл бұрын
Hi,nice video,so this mean if I want to connect my sonoff door sensor I need to add gateway ?, because I only have the door sensor only without the gateway and keeps failed to pairing with tuya app
@csongorvarga2 жыл бұрын
Yes that is correct. But with that gateway you will be able to connect loads of zigbee sensors.
@ndutzzzz2 жыл бұрын
@@csongorvarga awesome,thank you
@GabrielGlus2 жыл бұрын
Can I connect a tuya zigbee gateway to Ewelink ?
@csongorvarga2 жыл бұрын
No, the gateway much be the Sonoff gateway.
@geksogen41173 жыл бұрын
Отлично!
@DjMrMors Жыл бұрын
dear friend i have a question if u know, i have Sonoff ZBBridge Smart Hub can this be connected on tuya app? also can this hub pair different brands? thanks
@csongorvarga Жыл бұрын
The Sonoff Zigbee Bridge can only be used in eWelink. You can pair zigbee devices from a different brands to it. But if you are using Tuya, you need a Tuya compatible ZB Bridge.
@DjMrMors Жыл бұрын
@@csongorvarga ok so sonoof isnt compatible with tuya correct? do u know any compatible brand? i am trying to find but i cant. my problem is that i want to connect them on home assistant, with ewelink app i can connect directly without problem, but i have a automatic water gardening from woox , i want a device to connect different brands on tuya
@csongorvarga Жыл бұрын
@@DjMrMors I have a Blitzwolf BW-IS1 in Tuya. I think this is discontinued, but Blitzwolf BW-IS10 is available as a newer model.
@DjMrMors Жыл бұрын
@@csongorvarga and with this i can do what i told u?
@sinatriyo3 жыл бұрын
Hi, thanks for the video. How about connecting sonoff bridge (hub) to smart life app? Does it work?
@csongorvarga3 жыл бұрын
The bridge will not work with any other app. You need a smart life compatible zigbee bridge.
@oscarpuig7372 жыл бұрын
@@csongorvarga but tuya bridge doesn't work with sonoff button, for example
@godon953 жыл бұрын
Hi... Is it possible to connect Sonoff Wifi Basic to the Smart Life app? Thanks!
@csongorvarga3 жыл бұрын
No, those are different systems. But Blitzwolf have a very similar device.
@godon953 жыл бұрын
@@csongorvarga But Sonoff Zigbee Basic is able to connect Smart Life?
@JorgePerez-bj5ht3 жыл бұрын
Imagine the zigbee like a Bluetooth, you can pair the airpods with Android or IOS, because both sistems "talks Bluetooth" but you can use the Apple pencil on Android devices because they use a different sistems.
@rstyleuk3 жыл бұрын
Gutted just paid for a button switch , is there anyway to make it work with tuya zigbee or thru iffft etc
@csongorvarga3 жыл бұрын
Sorry to hear that. I am not sure if it will ever work, or what is really broken to tell if it can be fixed. Maybe if a similar device is released in Tuya. But I am sure that there are other buttons. IFTTT may work, but IFTTT is only enabled for a paid eWelink account.
@rstyleuk3 жыл бұрын
@@csongorvarga I’ve ordered the door sensor instead and return the button
@pistolerojr.entertainment20613 жыл бұрын
Will sonoff button work with tuya zigbee 3.0 bridge on tuya app?
@csongorvarga3 жыл бұрын
I did a video on that, and it was not working. It paired with the tuya bridge, but it was not working in the app.
@gaborlakatos84073 жыл бұрын
@@csongorvarga szia, több kommentben kérdezik, hogy Tuya bridge-el is működik? Erre válaszolod, hogy ezt mutattad itt be. De Te Blitzwolf-ot mutatod, akkor a Blitzwolf és a Tuya bridge azonos? Bocsánat , ha valamit félreértettem.
@csongorvarga3 жыл бұрын
@@gaborlakatos8407 A Tuya bridge-et én úgy értem hogy egy olyan Zigbee bridge ami a Tuya szoftverrel működik. Nekem csak ez az egy Blitzwolf bridge-em van, ezzel tudtam tesztelni. Én úgy gondolom hogy ha egy másik Tuya kompatibilis Zigbee bridge-t veszel, az ugyan így fog működni.
@cyp101003 жыл бұрын
Does the sonoff bridge zigbee works with tuya ?
@csongorvarga3 жыл бұрын
No, you have to buy a Tuya compatible bridge.
@cyp101003 жыл бұрын
@@csongorvarga offf I was afraid of that.. i.ve seen some people doing some programming with Tazmota... better buy something else.
@csongorvarga3 жыл бұрын
@@cyp10100 Yes, if can be refreshed with Tasmota, but that will not make it Tuya compatible. You want to do that if you are planning to use your own home automation server.
@TopGar3 жыл бұрын
Hello! Are you trying this sensors in Alexa? I also have snzbs sensor, it works excellent in Tuya App but Alexa don't see it :( Do you have any idea?
@csongorvarga3 жыл бұрын
Sorry, I don't have Alexa, so I would not know. hopefully someone else can answer that.
@TopGar3 жыл бұрын
@@csongorvarga Thanks for quick response!
@JorgePerez-bj5ht3 жыл бұрын
I was have the same question, but as you can see 9:46, third party control don't show Alexa logo. So you can't see or make routines on Alexa whit the door sensor. Can you tell us if the PIR show the Alexa logo?
@csongorvarga3 жыл бұрын
@@JorgePerez-bj5ht No, it does not.
@TopGar3 жыл бұрын
@@JorgePerez-bj5ht But this same sensor with sonoff brige work with Alexa :(
@AladinTechnology3 жыл бұрын
do I need tuya zigbee bridge
@csongorvarga3 жыл бұрын
Yes, you need a zigbee bridge with works with Tuya. There are many different makes available.
@AladinTechnology3 жыл бұрын
@@csongorvarga but can it work with ewlink zigbee bridge
@csongorvarga3 жыл бұрын
@@AladinTechnology No, the Sonoff zigbee bridge will only work with ewelink, NOT Tuya.
@AladinTechnology3 жыл бұрын
@@csongorvarga i mean can this zigbee switch work with sonoff devices on ewlink app
@csongorvarga3 жыл бұрын
@@AladinTechnology Didn't you watch this video. This is what it is about!