CT90 Trail 90 Lifan 125cc electric start semiauto Will it fit?

Successful swap of the newer style electric start Lifan 125cc electric start semi-auto clutch into a 1971 Honda CT90
Parts list:
Lifan 125cc Electric start motor: a.co/d/ee4TFHQ
Simplified wiring harness if you dont want electric start: a.co/d/adOgKdb
Intake manifold: a.co/d/i0Uzzsv
Intake spacer/adapter: a.co/d/bdtPmVd
DrATV motor mount adapter parts (rear motor adapter kit and footpeg adapter. These can be referenced here and then searched on ebay): dratv.com/bofoa...

[@bEarishpArrot]

Hey huge thank you for linking that intake manifold!

[@arkansasjon2171]

No problem! Glad it helped!

[@jeffferguson899]

just get a nibbi 22 carb. bolt it on and go. no adjustments needed. it will run perfect out of the box

[@jacobzurawski]

Thanks for the info. My buddy is selling that same lifan that he'd bought for another project so this is all very helpful

[@arkansasjon2171]

That great! Hope it helps you get yours done!

[@petershepardson6818]

Can you post the full parts list?

[@arkansasjon2171]

Here is the list, i have added to the description. If i missed anything, let me know: Parts list: Lifan 125cc Electric start motor: a.co/d/ee4TFHQ Simplified wiring harness if you dont want electric start: a.co/d/adOgKdb Intake manifold: a.co/d/i0Uzzsv Intake spacer/adapter: a.co/d/bdtPmVd DrATV motor mount adapter parts (rear motor adapter kit and footpeg adapter. These can be referenced here and then searched on ebay): dratv.com/bofoadplb.html

[@onemanup7895]

nice job john, as someone who has used those carb inlet spinner plates can I recommend you fit some decent o-rings to them as the ones they come with go hard and they crack, then the motor runs lean, and these cast iron barrel 125's dont like being run lean at all,

[@arkansasjon2171]

Thank you! I will swap that out. Did you just find an oring at a parts store?

[@onemanup7895]

@@arkansasjon2171 yeah, went to a hydraulic hose supplier and he had some real good quality rings, also those little countersunk screws are cheese, if they arent an allen type swap them too and put some threadlocker on when you got them as if the carb is 90 deh to the spinner screws it loads them a fair bit

[@arkansasjon2171]

@@onemanup7895 good advice. Thank you!

[@walker2508]

I was hoping to see you ride. What is the top speed now?

[@arkansasjon2171]

I will have to get my wife to test that out...im a pretty big guy, it wouldnt get up to real top speed with me on it. I'll try to make a follow up video with another review of the motor after its broken in.