CTR2 MIDI Firmware Update

[@Lynovation]

Sorry about the poor audio... apparently my new office is an echo chamber :)

[@patrickmolloy6994]

UPGRADE went exactly as shown. Excellent. What isn't clear is how to set the various controls on the midi. I'lll connect to the iPhone's SDR-Control app with bluetooth to see what I can do .

[@Lynovation]

Everything you need to know (and probably a lot you don't) can be found in the operation manual: ctr2.lynovation.com/ctr2-midi-operation-manual/

[@Lynovation]

One thing I forgot to mention in the video - erasing the flash memory resets all the settings on your unit back to default so you'll need to connect to the unit with a terminal and edit the maps (press 'e' to edit maps) and recalibrate the buttons (press 'g' to recalibrate the buttons). Let me know if you have any problems with updating your unit. 73, Lynn

[@charlierubenstein4141]

Well, I tried......but after getting the initial error, I looked at the COM ports, but the original one (COM3) was still there.

[@Lynovation]

@@charlierubenstein4141 If the unit doesn't enter programming mode (as indicated by the new COM port) you'll need to follow the procedure in Appendix C, Installing using Linux or Mac, in the operation manual. You can download the manual here: ctr2.lynovation.com/ctr2-midi-operation-manual/

[@charlierubenstein4141]

@@Lynovation I tried again, and after the initial sync error, I heard the USB tones indicating a change in the port. I went to the newer port number (although that port didn't show in device manager) and clicked START. In the terminal window, there are lots of dots going by, but it has been quite a long time and nothing has finished. How long does it take to load the new firmware?.