I haven't seen the assembly process. The precision requirements for tenons are relatively high. Is there any video to prove it?
@AngieGMarrone Жыл бұрын
I just pledged for the Cubiio Standard! Can’t wait for it release. My main material will be working with Acrylic sheets.
@Cubiio Жыл бұрын
We appreciate your pledge! Cubiio X cuts transparent acrylic perfectly. Thank you!
@hoinyoo3826 Жыл бұрын
How do I solve the cooling of the router while using the machine?
@Cubiio Жыл бұрын
We suggest excellent Makita routers, which can work for several hours countinously.
@hoinyoo3826 Жыл бұрын
Thanks for your good answer👍
@jy4812 Жыл бұрын
절단면이 깨끗하게 잘리지는 않나요?
@Cubiio Жыл бұрын
The routed surface has to be sanded.
@piratemaui26 Жыл бұрын
Any requirement of the thickness of the timber?
@Cubiio Жыл бұрын
18 mm in this video. Max 30 mm for this machine.
@dimitrilikissas Жыл бұрын
I also pledged but I am worried that this job took 3 hours to cut!! It should be more like 1 hour max
@Cubiio Жыл бұрын
Thanks for your pledge! This video was recorded in the early stage with a relatively conservative condition: feed rate = 800 mm/min. After recent verifications, the final feed rate, listed in the campaign, is 1200 mm/min. That means 1.5-time faster. In addition, the cutting depth 2 mm/pass can be increased to 3 mm/pass. Therefore, the number of routing passes can be reduced from 9 to 6, which implies another 1.5-time faster. 1.5 x 1.5 = 2.25. In summary, the time of this job can be reduced from 3 hours to 80 minutes.
@dimitrilikissas Жыл бұрын
@@Cubiio that’s great news! I was feeling a bit bad about this!